similar to: Svn web access (was: svn commit r3010 - trunk/docs)

side note on this commit... 2011/5/31 Arnaud Quette <aquette at alioth.debian.org> > Author: aquette > Date: Tue May 31 09:00:57 2011 > New Revision: 3010 > URL: http://trac.networkupstools.org/projects/nut/changeset/3010 > > Log: > Update Subversion access information, following Alioth update > > Modified: > trunk/docs/download.txt > > Modified:

Hi fellows, As the NUT-NG draft will take me more time than I currently have (I found myself too optimistic since I got a baby ;-), below is the beginning of an answer to the "Common Power Management with UPS support" problem... First, NUT is pure userspace code, for portability issue, and will remain. USB is through libusb, snmp through net-snmp and serial through standard read/write.

Hi Powermen ;-) I recently came across the Powerman project (http://sourceforge.net/projects/powerman/), pointed by Tony Merenda, from Opengear (thanks Tony). Congrats for your work in this area! I've thought a bit about Powerman and NUT since then... NUT currently supports hosts of UPSs and few PDUs (RPCs), and provides tons of features: http://test.networkupstools.org

Dear NUT users and developers, Like the other years, before taking a small rest, here are some news related to NUT. * First, you should have seen the 2.0.5-pre1 release announcement. I don't think 2.0.5 is very far, but I realized that I've made an archive including the .svn directory (bad, bad me. I should know that release are made against exported svn, not checked out!) * Next,

Dear NUT users and developers, Like the other years, before taking a small rest, here are some news related to NUT. * First, you should have seen the 2.0.5-pre1 release announcement. I don't think 2.0.5 is very far, but I realized that I've made an archive including the .svn directory (bad, bad me. I should know that release are made against exported svn, not checked out!) * Next,

It looks like the Subversion migration is working. The CVS repository is still there, but in read-only mode. However, the SVN repository preserves the version history of the CVS repository, albeit organized slightly differently. For an introduction to Subversion, this online book is essential: http://svnbook.red-bean.com/ It is written by some of the Subversion authors. The only drawback I

2009/1/22 Spiros Ioannou <sivann at gmail.com> > Cher Arnaud, > Hi Spiros, > I send you a demo that reads info from an Emerson Liebert > GXT2-10000T230 through the RS-232 port. This uses the "ESP-II (ESP 2) > Protocol". > Current supported data includes: measurements (voltage, temperature, > etc) , ID strings (serial number, etc), status flags (inverter on,

On Feb 11, 2008 5:30 PM, Marcio Gomes <mpg at microlink.com.br> wrote: > I change the if in [OFF] detect state to, in original way, if you send a > reset.watchdog, the UPS goes > to OFF state in clients, but it is not correct, because UPS is OL and > Shutdown are in progress, but > the power is not OFF First of all, thanks for the patch. But I have a few comments: Are you

Hi fellows, I'm really pleased to announce that a first stage of NUT and HAL [1] integration has been reached: NUT drivers (in fact, only newhidups, tripplite_usb and bcmxcp_usb for the moment) can feed HAL data. It's a "quick and dirty" hack, as a proof of concept, and there is still lots of things to be done, both on NUT and HAL sides. But it's a good base, and very

Hello, I'm seeing some messages from dovecot in my logs such as: May 8 11:43:41 snowdrift dovecot: IMAP(username): Disconnected: BUG: Unknown internal error I did some searching, and discovered a similar report last month, to which there was a request for more information that didn't seem to get followed up, so I have collected this information too. Dovecot version: 1.0.10 (from Ubuntu

Hi, I''m trying to have Rails and WebSVN working together with Apache and CGI, but cant do it. The classical way using a <Location> directive ends to a Rails 404 page. I also tried a VHost replacing the <Location> directive with a <Directory> directive... again it doesn''t work. Does anyone had the same problem ? Do you have any idea. If it helps I installed SVN

Hi, See inline below. > On Dec 22, 2017, at 9:12 AM, Martin Maechler <maechler at stat.math.ethz.ch> wrote: > >>>>>> Duncan Murdoch <murdoch.duncan at gmail.com> >>>>>> on Thu, 21 Dec 2017 14:23:13 -0500 writes: > >> On 21/12/2017 1:02 PM, Winston Chang wrote: >>>>> On recent builds of R-devel, R CMD check gives

On 22/12/2017 10:46 AM, Marc Schwartz wrote: > Hi, > > See inline below. > > >> On Dec 22, 2017, at 9:12 AM, Martin Maechler <maechler at stat.math.ethz.ch> wrote: >> >>>>>>> Duncan Murdoch <murdoch.duncan at gmail.com> >>>>>>> on Thu, 21 Dec 2017 14:23:13 -0500 writes: >> >>> On 21/12/2017 1:02

Hello, We''ve recently started seeing several domUs on multiple machines losing all network connectivity. At least one of these machines (since they are customer machines I can''t verify it for all of them) give the error: $ sudo ifup eth0 eth0: full queue wasn''t stopped! About the only Google hit for this message is:

Resending as kwin and plasma mailinglists think that 200k is too large for a mail. The "attachment" can be found in [2] Hi, Pleas note: crossposting to kwin, compiz and plasma development lists. Please keep all lists CCed. Attached you can find a very first draft for a compositing manager specification. It is currently based upon the KWin/Plasma interaction specified in the

THE GOOD: NUT is able to communicate with my Powerware 5115A over USB using the bcmxcp_usb driver: ambient.temperature: 38 battery.charge: 99 battery.runtime: 9000 battery.voltage: 27.07 driver.name: bcmxcp_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.2.1 driver.version.internal: 0.13 input.frequency: 50.34 input.voltage: 235 output.current: 0.0

Hi, seems there is one missing change in /trunk/scripts/udev/nut-usbups.rules.in BUS -> SUBSYSTEMS previous change [1] missed this. Now, the latest udev started to complain: > ... udevd[31526]: BUS= will be removed in a future udev version ... 098 udev version (from 2006) is required for this [2], but this is the same version as required for previous SYSFS -> ATTR change. I've

Hello, so far I've been using the latest tarball to compile celt into a multi platform library. gcc 4.2.1 under MacOSX 10.6 (Snow Leopard) is spitting out a few warnings. I wanted to check in the latest git repository to see if they might have already been fixed before reporting them. I would much prefer do so without having to install a git client on my mac, that is why I was looking for an

I'd like to use the zfsacl module now in 3.2.0 (http://websvn.samba.org/cgi-bin/viewcvs.cgi/branches/SAMBA_3_2_0/source/modules/vfs_zfsacl.c?rev=23856&view=log) with 3.0.25a prebuilt on OpenSolaris. Is this possible? If so, will it require building Samba from source or is there a way to use it with the pre-existing binary? -- Pete

>>>>> Duncan Murdoch <murdoch.duncan at gmail.com> >>>>> on Thu, 21 Dec 2017 14:23:13 -0500 writes: > On 21/12/2017 1:02 PM, Winston Chang wrote: >>>> On recent builds of R-devel, R CMD check gives a >>>> WARNING when some compiler warning flags are detected, >>>> such as -Werror, because they are