similar to: snmp-ups suicides on UPS unreachable

Hi NUT-Users, we work with a GE LP 33 UPS and an Advanced SNMP WEB Interface Card. This card supports the RFC1628 Definition. So I think this combination work together with NUT and the snmp-driver, correct? I installed the networkupstools on my Debian Sarge with apt-get (nut & nut-snmp). After configuration I start the upsd and upsmon. I get following output in /var/log/syslog: ... Aug 3

Hi One idea I've had for some time, but unfortunately not had time to implement, is to add a general SNMP agent, which will work with all UPSes supported by nut. The idea is to have the SNMP agent use the "nut API" to fetch values from the UPS. So the SNMP agent will be similar to the "upsc" utility. Whenever the SNMP agent is queried for information, it will use the

Hi all, I've been trying to build NUT (latest release source) on a pretty "standard" CentOS (RHEL style) linux box, to monitor an APC Symmetra UPS Unit which powers our server room and broadcasts information via SNMP to appropriate clients. I am having some trouble even encouraging NUT to build with snmp support, which doesn't seem to happen by default. I am curious if anyone

OpenBSD 5.6 nut-2.7.2 (bin package) Liebert IntelliSlot Unity Card IS-UNITY-DP ups.conf: ...... ? mibs = ietf ? snmp_version = v1 ...... The problem is that the card responds to other snmp (v1,2c,3) requests normally but not to the 1.3.6.1.2.1.33.1.1.1.0 (UPS-MIB.upsIdentManufacturer). # snmp-ups -a laes2ups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.72 (2.7.2) ?? 0.000000???? debug

On Feb 10, 2014, at 1:16 AM, ??? ????? wrote: > Thanks for you reply. Concerning the subscribtion list, I have earlier filled in the fields and sent request to subscribe to this list, but still haven't got an answer. I added you manually, but check your spam folder just in case it ended up there. > Yes, I do have a MIB file that was on CD that came with the UPS, attached it to this

Hi all - I'm new to both UPS setup and SNMP on linux - so I'd appreciate any help I can get....I'm stuck! I'm running fedora core 5, and have installed net-snmp and nut. I'm trying to get my network connected UPS to this linux machine. My /etc/ups/ups.conf looks like this: [upsnetwork] driver = snmp-ups port = 172.31.254.7 community = public desc="Network

Hello We have an Socomec Sicon Netys PR3000 UPS equipped with NetVision Web/SNMP adaptor. I try to monitor the ups using snmp-ups driver and netvision mibs set. The snmp-ups driver starts correctly and connects to the UPS, upsd confirms it, but upsmon constantly shows "No communication" error I think the cause is the SNMP adapter reports the UPS status as "ECO mode"

Hello, I have an NETYS RT 1/1 UPS, which is not fully supported. Starting snmp driver displays: [root at kvm1 ~]# snmp-ups -a local Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) Duplicate driver instance detected! Terminating other driver! No matching MIB found for sysOID '.1.3.6.1.4.1.2254.2.4'! Please report it to NUT developers, with an 'upsc' output for your

Hello, I have an NETYS RT 1/1 UPS, which is not fully supported. Starting snmp driver displays: [root at kvm1 ~]# snmp-ups -a local Network UPS Tools - Generic SNMP UPS driver 0.66 (2.6.4) Duplicate driver instance detected! Terminating other driver! No matching MIB found for sysOID '.1.3.6.1.4.1.2254.2.4'! Please report it to NUT developers, with an 'upsc' output for your

We use HP R5500XR UPS, and they all have SNMP cards. These devices supposedly use the IETF MIB, but in order to get the SNMP driver to talk to them I have had to hack it slightly. I'd like to see these UPS proplerly supported in the official nut release (mostly so I don't have to faff around patching and repackaging when a new version comes out) and would be more than happy to provide

Hi, This appears to be related to a thread from January 2010: http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-January/004470.html NB: This is on an HP-UX 11.31 box, using a self compiled and packaged version of NUT 2.6.3, and net-snmp v5.7.1. Therefore some of the search paths and things like that may well be wrong because I've done something dumb. I'm also only just getting

On Feb 27, 2014, at 7:07 AM, jimklimov at cos.ru wrote: > This apparently implies that, unlike some docs say, the snmp-ups driver can send the shutdown signals (is not crippled by design)? ;) We're working on it: http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/docs/man/snmp-ups.html#_shutdown A quick check says that the implementation has been there since v2.6.4, and

Hi, Our research group is planning to buy an MGE Pulsar Evolution 3000 to protect our operational computers against power failures with an SNMP network management card. We would like to connect the UPS only through its network card (and not via USB or serial cable to another computer) and install the NUT software (client+server) on each machine to catch the shutdown SNMP signal from the UPS

Hi List, i've installed the network ups tool on one of my windows machine (server 2012 r2). My ups is an APC Back-UPS Pro 550 which is connected via USB to an Synology Diskstation DS414. I found this video https://www.youtube.com/watch?v=0l54n_37M_k My config: *nut.conf* MODE=standalone *ups.conf* [ups] driver = snmp-ups port = 192.168.2.5 community = public *upsd.users* [monuser]

Hi, I would like to contribute code to make the SNMP driver compatible with HP's AF401A UPS module. It is also compatible with HP's older SNMP modules. It's just a new mib specification plus the necessary changes to snmp-ups.c Several sources have told me that these UPSs use the cpqpower.mib, but comparing that mib at http://www.snmplink.org/cgi-bin/nd/m/Ent/H/Hewlett

Riello Netman Plus 102 Card plugged into a Riello Sentinel SDL 6000-7 and a Riello Sentinel Dual SDH 1000-7 upsc RielloSentinelSDL6000 battery.charge: 100.0 battery.current: 0.0 battery.runtime: 16560.0 battery.runtime.low: 3 battery.voltage: 217.7 driver.name: snmp-ups driver.parameter.mibs: ietf driver.parameter.pollinterval: 2 driver.parameter.port: 10.20.30.39 driver.version: 2.2.2

Riello Netman Plus 102 Card plugged into a Riello Sentinel SDL 6000-7 and a Riello Sentinel Dual SDH 1000-7 upsc RielloSentinelSDL6000 battery.charge: 100.0 battery.current: 0.0 battery.runtime: 16560.0 battery.runtime.low: 3 battery.voltage: 217.7 driver.name: snmp-ups driver.parameter.mibs: ietf driver.parameter.pollinterval: 2 driver.parameter.port: 10.20.30.39 driver.version: 2.2.2

I know this isn't exactly the right place to ask, but I figure at least *someone* on this list has done it once. I recently acquired an AP9617 web/snmp management board for my UPS. The web and telnet part of it work great. However, I can't get *anything* from the snmp interface. I've triple-checked the community name and access settings (currently are wide open). I've ensured

Hello, I have in production one big ups of 30 kVA (MAS-MC 330). I bought recently one Netvision SNMP card and NUT is working with snmp-ups driver: battery.charge: 100.0 battery.runtime: -60.0 battery.voltage: 483.8 driver.name: snmp-ups driver.parameter.mibs: netvision driver.parameter.port: xxx.xxx.xxx.xxx driver.version: 2.0.2 driver.version.internal: 0.41 input.voltage: 219.0 output.current:

Hello All ! Recently I have upgraded NUT to 2.4.1, and now I can't monitor old IMV LanPro S3 UPS with old SNMP board. Previously it is monitored OK, but now snmp-ups refuses to start: [root at perforce /usr/local/etc/nut]# /usr/local/libexec/nut/snmp-ups -a lanproups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1) debug level is '7' SNMP UPS driver : entering