similar to: Powerware 9125 & bcmxcp driver

Thanks to Olli, I can now talk to my PW9125 via SNMP: > upsc cscfups001@localhost ambient.temperature: 031.0 battery.charge: 090.0 battery.runtime: 2640.0 battery.voltage: 055.5 driver.name: snmp-ups driver.parameter.mibs: pw driver.parameter.port: cscfups001.cs.uwaterloo.ca driver.version: 2.1.0 driver.version.internal: 0.41 input.frequency: 060.0 input.voltage: 120.0 output.current: 020.0

Hi, just through setting up nut-2.0.2 I ran into a shutdown problem. As I have already spend some time on it and don't know any further, I like to ask for advice. Situation: Powerware 9125 serially connected using /dev/cua0 nut compiled and installed fine system shall - broadcast a message and shut down if ups on battery for 30+ s - wait 120 s - broadcast another message - give system 120

I'm currently testing the bcmxcp driver for NUT, and it causes me some trouble. And when scanning the archives it seems like the 3110 USB problem reported recently. The bcmxcp daemon stops running, and the logs shows the following: Oct 6 14:22:32 host.dom.tld bcmxcp[82628]: Communications with UPS lost: Receive error (data): got -1 bytes instead of 28!!! Oct 6 14:22:33 host.dom.tld

On Sep 19, 2014, at 4:03 PM, Nello Lucchesi <nello at octobergroup.com> wrote: > I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. > > I looked a the list and didn't see a driver for it: > > http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton > > I see a

I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. I looked a the list and didn't see a driver for it: http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton I see a driver for the 9130; any idea whether it will work with a 9125? Any other ideas for connecting the 9125 to a FreeNAS

I'm trying to get a Powerware 5125 UPS running using the bcmxcp driver, but I get the following errors: video2:~# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error executing

Hello All, Sorry for the long post, I'm just trying to give as much info as I have about the problem(s) ... Recently I've tried to port NUT to the hardware router Asus WL-500g Deluxe (http://wiki.openwrt.org/OpenWrtDocs/Hardware/Asus/WL500GD), that runs OpenWRT Linux distribution (http://www.openwrt.org) based on Linux 2.4.30 kernel, in order to support my Powerware 5110 UPS (through USB

On Feb 20, 2017, at 11:19 AM, Mike <the.lists at mgm51.com> wrote: > > This UPS is already listed in the compatibility list. But I wanted to > add the instant commands supported by upscmd: > ... > and note that a delayed shutoff command is not available. > > (NUT 2.7.4 on OpenBSD 6.0) > > imo, it would be useful if this info were submitted along with the

On 2/21/2017 8:34 AM, Charles Lepple wrote: > On Feb 20, 2017, at 11:19 AM, Mike <the.lists at mgm51.com> wrote: >> >> This UPS is already listed in the compatibility list. But I wanted to >> add the instant commands supported by upscmd: >> > ... >> and note that a delayed shutoff command is not available. >> >> (NUT 2.7.4 on OpenBSD 6.0)

This UPS is already listed in the compatibility list. But I wanted to add the instant commands supported by upscmd: ============================ Instant commands supported on UPS [PW5125]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper load.on - Turn on the load immediately outlet.1.load.off - Turn off the load on

I am using nut-snmp driver on ubuntu 8.04 to query a Powerware ConnectUPS Web/SNMP Card V4.20. With 0.41 I used to be able to query these field that are now gone with 0.42: input.frequency input.voltage output.voltage ups.load Any idea how I can get ups.load back ? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I just acquired a new UPS and have been trying to get it to work with NUT. It's an Eaton/Powerware 9120 700i with both USB and RS-232 interfaces. I first tried the USB interface (using bcmxcp_usb) and found that the UPS worked fine for a few minutes but then NUT lost communication and didn't get it back. In addition the UPS itself seemed to lock up at one point such that the

Hi One idea I&#39;ve had for some time, but unfortunately not had time to implement, is to add a general SNMP agent, which will work with all UPSes supported by nut. The idea is to have the SNMP agent use the "nut API" to fetch values from the UPS. So the SNMP agent will be similar to the "upsc" utility. Whenever the SNMP agent is queried for information, it will use the

Hi. FYI. Have tested the bcmxcp driver from cvs development tag. And it work as expected on the 5115 with the serial interface. So to Wolfgang, no bug introduced in the serial module when you split'ed the driver. If i get some time to spare, i have a look on the serial module to make it wake up the ups. The 9125 is type pnp so it need to be waken up. Then there are some cleanup to be done

Hi Guys, I have a couple of servers which runs CentOS 5.5 and CentOS 5.4. We have decided to buy a UPS and we choose Eaton EX RT 11 plus eaton network management card minislot. I have read on the site of Eaton that they have two applications which could gracefully shutdown my servers - LanSafe and NetWatch. My experience with UPS and those applications is zero so I`m here for some advises? Do you

Dear All, We have an Eaton 9395 UPS, with a ConnectUPS Web/SNMP card. I've successfully configured NUT to talk to the SNMP card, however it reports a battery.runtime.low of 1 , not much use, how do I change this value, is it defined by the UPS itself, the SNMP card, or NUT ? Output of upsc below. Cheers Stuart rcs-manage-1:~ # !upsc upsc phys-eaton ambient.temperature: 27.0

Hi Here is a very minor patch for the bcmxcp.c driver, mainly fixing the function name used in debug statement, and at the same time fix indentation. Regards Alf Hogemark From 86c7940d0ea11b5b38a7f4518095ee2428d658c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Alf=20H=C3=B8gemark?= <alf at i100.no> Date: Mon, 1 Jul 2013 21:11:40 +0200 Subject: [PATCH] bcmxcp: Fix method name outputted in

Hi I have now done some work to clean up the bcmxcp driver somewhat, and then addede support for a number of more ups variables, so if you have hardware supporting it, you should get more output from "upsc" command, for example. I do not have hardware to test this, so I hope someone do have hardware and are willing to test. The changes should be ok, it is just add new mappings from

Hi, Got this mail. It looks like he has a ups with revision before K, and need another startup. The 'PW_SET_REQ_ONLY_MODE' is not implemented, so to make it work we have to follow the protocol and send a 'PW_ID_BLOCK_REQ'. This in comsetup of bcmxcp_ser.c Also the standard id block ends with 'Statistics Map', so we have to Skip after reading the length of the 'Size

I ran into a portability issue with drivers/bcmxcp.c in nut-2.4.1 on my UnixWare 7.1.4 machine. The error I get is ..... UX:acomp: ERROR: "/opt/src/utils/nut-2.4.1/drivers/bcmxcp.c", line 835: integral constant expression expected ..... Looking at the code we see ..... int init_outlet(unsigned char len) { unsigned char answer[len]; ..... Although gcc can handle it, it's not