similar to: Cyberpower OR500 on usbhid-ups

I'm playing with a new CentOS 8 with a cyperpower OR500 (a smaller sibling to the OR700) plugged in via USB. GNOME sees the UPS... but NUT does not (even if I shut down gnome). > [root at delp ups]# upsdrvctl start > Network UPS Tools - UPS driver controller 2.7.4 > Network UPS Tools - Generic HID driver 0.41 (2.7.4) > USB communication driver 0.33 > No matching HID UPS found

On Mar 27, 2020, at 11:51 PM, Ben Kamen <ben at benkamen.net> wrote: > > I'm playing with a new CentOS 8 with a cyperpower OR500 (a smaller sibling to the OR700) plugged in via USB. > > GNOME sees the UPS... but NUT does not (even if I shut down gnome). > >> [root at delp ups]# upsdrvctl start >> Network UPS Tools - UPS driver controller 2.7.4 >>

CyberPower OR700LCDRM1U (http://www.cyberpowersystems.com/products/ups-systems/smart-app-ups/rackmount-lcd/OR700LCDRM1U.html) upsc output: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 6000 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 14.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS OR700

CyberPower Systems PR6000LCDRTXL5U http://www.cyberpowersystems.com/products/ups-systems/smart-app-ups/pp-series/PR6000LCDRTXL5U.html I had to create the following udev rule (on RHEL6): ATTR{idVendor}=="0764", ATTR{idProduct}=="0601", MODE="664", GROUP="dialout" Shutdown testing successful. UPS comes back online after turning off. # upsc battery.charge:

Begin forwarded message: > From: James Erickson <jimerickso at gmail.com> > Date: August 10, 2009 2:50:52 PM EDT > To: Charles Lepple <clepple at gmail.com> > Subject: Re: [Nut-upsuser] CyberPower OR2200 > > On Sun, Aug 09, 2009 at 06:38:32PM -0400, Charles Lepple wrote: >> >>> From: James Erickson >>> Date: August 9, 2009 6:17:51 PM EDT

My first attempt to post this bounced -- this is a 2nd try. ----------------------------------------------------------------- I've recently installed a CyberPower OR500 on a CentOS 6.4 system. nut comes RPM'd as nut-hal -- and I've played a little with it - but I'm trying to figure out just what it provides at that point. (looking at the docs, I'm not quite sure) I'd

On Nov 18, 2013, at 10:39 AM, Ben Kamen wrote: > My first attempt to post this bounced -- this is a 2nd try. Sorry about that - Alioth, the server that hosts the lists, was down due to disk failure: http://lists.debian.org/debian-infrastructure-announce/2013/11/msg00001.html > I've recently installed a CyberPower OR500 on a CentOS 6.4 system. > > nut comes RPM'd as nut-hal

---------- Forwarded message ---------- From: davor emard <davoremard at gmail.com> Date: Tue, 25 Mar 2008 09:09:40 +0100 Subject: Cyberpower usbhid-ups wrong battery voltage To: libusb-devel at lists.sourceforge.net HI I have cyberpower value 800E connected via usb. In the status battery voltage is too high 20V - 21V while measurement at the battery terminals gives 13.6V -------------- next

CyberPower Battery Backup with Surge Protection, model LE825G Appears to function properly with the driver listed on the HCL for the Cyber Power Systems ups 2 685AVR USB (usbhid-ups). Tested with shutdown mode "UPS Goes On Battery" with a 5 second timer and the system successfully shutdown as expected. upsc output: upsc ups battery.charge: 100 battery.charge.low: 10

CyberPower Value 1500ELCD-RU root at ubuntu:/home/oper# upsc myups at localhost battery.charge: 87 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 5220 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 16.5 battery.voltage.nominal: 24 device.mfr: CPS device.model: Value1500E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq:

[please use Reply-All - this list does not modify the reply-to header] > On Nov 23, 2016, at 10:30 AM, Craig STCR <craig.stcr1 at gmail.com> wrote: > > It looks like the CyberPower Cyber Power Systems CP685AVR supported by > usbhid-ups has a favorable device dump linked to the Devices Dumps > Library page here: > >

Cyberpower CPS850avrlcd https://www.cyberpowersystems.com/product/ups/cp850avrlcd/ shutdown sequence: UNTESTED upsc output: _____  sudo upsc cp-ups battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1230 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 13.5 battery.voltage.nominal: 12 device.mfr: CPS device.model: UPS

[shutdown sequence] I have tested and verified the shutdown sequence works. [manufacturor] https://www.cyberpowersystems.com/product/ups/ec350g/ mbeisser at nas:~$ upsc ups Init SSL without certificate database battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1575 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 9.3

It looks like the CyberPower Cyber Power Systems CP685AVR supported by usbhid-ups has a favorable device dump linked to the Devices Dumps Library page here: http://networkupstools.org/ddl/Cyber_Power_Systems/CP685AVR.html However, it is not listed anywhere on the Hardware Compatibility List (HCL) page here: http://networkupstools.org/stable-hcl.html This appears to be an omission on the HCL

Hello: I have a Cyberpower OL1500RTXL2U ups connected to a raspberry pi running void linux via USB. After configuring the UPS and attempting to start the usbhid-ups driver, it fails to detect it, even when running with the -u root option. Based on the debug logs, it checks the correct USB device but doesn't detect it for some reason. Below are terminal extracts of nut-scanner and attempting

I have had a similar problem to many other people for the last few months with my Cyberpower UPS. It was working properly after reboot about one in five times; the rest of the time it would endlessly disconnect and reconnect, according to syslog messages. The latest I was able to find towards a solution is http://www.mail-archive.com/nut-upsuser at lists.alioth.debian.org/msg06671.html The root

UPS - CYBERPOWER CPS DX600E upsc usb at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS battery.runtime: 1650 battery.runtime.low: 300 battery.type: PbAcid battery.voltage: 4.8 battery.voltage.nominal: 12 device.mfr: CPS device.model: DX600E device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2

Hi, Have anybody tried Cyberpower Value 600E (USB) under FreeBSD? usbhid-ups from nut 2.4.1 does not recognize (find) the device on my machine. [root at substance /usr/local/libexec/nut]# uname -a FreeBSD substance.dyndns.org 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 [root at substance

I've been running the Debian packaged 2.4.3 for a while, working find. When 2.6.0-1 just pushed through to debian, things have stopped working :( I checked what had been the usual suspects in past problems, namely permissions problems in /dev/bus/usb, but all seems in order: $ lsusb ... Bus 009 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS $ ls -l /dev/bus/usb/009/002

Hello, I've had this same model CyberPower connected to a linux server and a freebsd server. [root at sensor003 menon]# lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 004: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus