similar to: upsd flapping in the breeze

Hi, I have the above UPS connected to a FreeBSD 6.2 box and it shows 'data stale' very frequently (every few minutes). I have tried the usual trick of setting maxage, poll interval, etc etc but to no avail. When I wind up logging I see (on mge-shut) entering shut_get_report(id: 0d, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 16, len: 1800) shut_wait_ack():

2009/5/16 Arnaud Quette <aquette.dev at gmail.com> > > > 2009/5/7 Daniel O'Connor <doconnor at gsoft.com.au> > >> On Wed, 6 May 2009, Arnaud Quette wrote: >> > I think I've found something, but I would need an upsd debug output >> > (level 3) to see what going on the state socket. >> >> I've attached a log for you. >>

Hello, I've got a setup with NUT, where we've got two UPSes, ups1 and ups2. UPS1 supports our servers, while UPS2 supports our desktop boxes. We monitor both of them via USB on a box now called "upsmon". The interesting point comes here. We monitor both UPSes on the upsmon box, but if UPS2 fails, which supports our desktop boxes, NUT shouldn't initiate a shutdown in

Hi, I have a customer who just bought an APC Back-UPS XS 1300 LCD and I thought I'd try the latest NUT with it (on an old-ish FreeBSD 6.x system). It sees the UPS but I can't actually query it for data, in the usbhid-ups debug output I see.. 30.840512 HIDGetEvents: failed to buffer report: Result too large 30.840600 Got -34 HID objects... 30.840681 Quick update...

Hello I'm having a bit of a trouble to set up a Back-UPS on a production box. We're using the newhidups driver for this module here, in the office, and I'd like to monitor the one, out in our server farm. The situation is the following: # /lib/nut/newhidups -u root -DD -a ups1 2> ups1.out Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) this one worked

Hello, We have two APC Back-UPS RS 1500 USB stuff, and i've got a bit of a problem with it and NUT. The usbdevs output: addr 2: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion addr 3: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion (UPS1 and UPS2) I've configured our NUT system to monitor the UPSes, and it went very fine till the time had arrived for a

(Note that I mentioned this *was* previously working with an older version of Nut). [irs2-ups1] driver = snmp-ups port = irs2-ups1.sum.naoj.org mibs = auto community = private irs2-ups1.sum.naoj.org responds to pings. On Tue, Oct 8, 2013 at 3:55 PM, Tim Rice <tim at multitalents.net> wrote: > On Tue, 8 Oct 2013, Philip Tait wrote: > > > Here is the upsc

Greetings all, Anyone have a clue on this behavior (see below) on this behavior with FreeNAS-8.3.0-RELEASE-x64 (r12701M) on a TrippLite 1500LCD UPS? NUT version is 2.6.5 Using the following profile: Tripp-Lite ups 2 Smart1500LCD USB (usbhid-ups) I get the following: Dec 10 21:40:12 nas6 kernel: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.02, addr 2> on usbus1 Dec 10 21:40:12

hello, at first I'm sorry my english isn't perfect but I tried to be clear I work with mandriva 2007 and with nut 2.0.1 installed with urpmi my UPS is a MGE Evolution 2200 connected with RS232 in my ups.conf I try to use mge-utalk driver and also mge-shut both seem to work I don't really known which I add to use It's the first point. As I saw on web site, I add maxage 25 in

On Tue, 8 Oct 2013, Philip Tait wrote: > Here is the upsc output: > > # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > 0.000000 debug level is '2' > 0.000327 SNMP UPS driver : entering upsdrv_initups() [snip] > 4.457750 No supported device detected I'm using a APC smart ups with a

On 28 May 2014, at 21:59, Charles Lepple <clepple at gmail.com> wrote: >> What would log it? > > The driver. OK. >> I could try running the driver with debugging and see if that shows anything of interest. > > That should help. Unfortunately for non-debug operation, it appears that most of the usbhid-ups instcmd messages are buried at debug level 3 or 5. That

Hi, I've got two MGE Ellipse 1500 UPS connected via usb to an ubuntu jaunty system with nut and libupsclient1 2.4.1-2ubuntu4. As soon as I start the driver for the second one, they start fighting each other and I get no data. I found an older post to this list that said: If you want to monitor multiple UPSes through usbhid-ups, you *must* make sure that each one can be uniquely identified

New NUT install dealing with three APC Smart-UPS 5000s, two of which have AP9617 and the third has a AP9619 card. The SNMPv3 configurations on all three are exactly the same. This is confirmed by snmpget calls that work just fine: snmpget -Cf -v3 -u [...] -l authPriv -A '[...]' -X '[...]' -a MD5 -x DES [upsname] .1.3.6.1.4.1.318.1.1.1.1.1.1.0 snmp-ups can query all three

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

I am currently trying to use your NUT program to monitor a SMART3000RMOD2U TRIPP LITE device. I find that it connects with the in the device folder as hiddev0 and if I connect a second device it connects under hiddev1. I attempted to use your software with the driver=usbhid-ups and port=auto, but when I try to discover it it can't be found. Then when I run the command /sbin/usbhid-ups -a

I see this in syslog: Aug 12 03:57:22 orion upsd[18274]: Data for UPS [a102-apc-10] is stale - check driver (one for each UPS). Then I see a bunch of messages like this: Aug 12 03:58:02 orion upsd[18274]: write() failed for ::1: Broken pipe Aug 12 03:58:02 orion snmpd[2872]: Connection from UDP: [127.0.0.1]:50940 And then it returns to normal like this: Aug 12 03:58:04 orion upsd[18274]: UPS

Hi, I've got a question about managing two UPSes under NUT. I have two similar model APC usb-connected UPSes to work with, but don't know how to manage them simultaneously from under Windows. Long story short, my ups.conf looks like this: --- ups.conf --- [ups1] driver= usbhid-ups port= auto serial=AS1054340323 [ups2] driver= usbhid-ups port= auto serial=AS1026662626 ---

Hi, I'm trying to convert users from a sendmail server to a postfix/dovecot server. All works fine but one of the last things is to rescue the messages in /var/mail/<user> on the old server. This seems very straitforward using the convert plugin but with the settings from the wiki, nothing happens when the user logs in. Do I need a private namespace for this as suggested elsewhere

Here is the upsc output: # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1 Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000 debug level is '2' 0.000327 SNMP UPS driver : entering upsdrv_initups() 0.000341 SNMP UPS driver : entering nut_snmp_init(snmp-ups) 0.056112 SNMP UPS driver : entering load_mib2nut(auto) 0.056126 trying the new

I'm trying to set up nut with a MGE UPS equiupped with a network management card, but encountered a problem. UPS: MGE Pulsar M 3000 Network Management card (installed in the UPS): 66102 (2006 edition) Operating system: FreeBSD Nut port version: 2.0.5 Nut driver: snmp-ups According to MGE in Norway this card is supported by nut, but only the old version of the card (66244) is listed on