similar to: [nut-commits] svn commit r1837 - trunk/clients

Hi, I have a system which monitors 2 UPSs, and it runs upslog twice. I had a problem with newsyslog rotating the log file because upslog keeps it open (arguably a bug IMO), but it also has no way of changing the PID file so newsyslog can't HUP it when log rotating. Attached is a patch which allows you to specify the argument for writepid() so you can differentiate them easily. -- Daniel

Hi Ted, Am 04.11.2014 um 04:12 schrieb Ted Mittelstaedt: > > Note that since the UPS relies on the voltage from the battery pack to > determine state of charge, it is quite useful to add in the battery pack > voltage to the logs as such: > > --- upslog.c.orig 2012-07-31 10:38:58.000000000 -0700 > +++ upslog.c 2014-02-20 09:23:14.000000000 -0800 > @@ -50,6 +50,7

Dear Ted, Am 07.11.2014 um 17:47 schrieb Ted Mittelstaedt: > On 11/3/2014 9:25 PM, thomas schorpp wrote: >> Hi Ted, >> >> Am 04.11.2014 um 04:12 schrieb Ted Mittelstaedt: >>> >> >>> Note that since the UPS relies on the voltage from the battery pack to >>> determine state of charge, it is quite useful to add in the battery pack >>>

On 11/3/2014 9:25 PM, thomas schorpp wrote: > Hi Ted, > > Am 04.11.2014 um 04:12 schrieb Ted Mittelstaedt: >> > >> Note that since the UPS relies on the voltage from the battery pack to >> determine state of charge, it is quite useful to add in the battery pack >> voltage to the logs as such: >> >> --- upslog.c.orig 2012-07-31 10:38:58.000000000

On 11/8/2014 6:54 AM, thomas schorpp wrote: > Dear Ted, > > Am 07.11.2014 um 17:47 schrieb Ted Mittelstaedt: >> On 11/3/2014 9:25 PM, thomas schorpp wrote: >>> Hi Ted, >>> >>> Am 04.11.2014 um 04:12 schrieb Ted Mittelstaedt: >>>> >>> >>>> Note that since the UPS relies on the voltage from the battery pack to

THANKYOUTHANKYOUTHANKYOUTHANKYOU!!!!!! There was a smaller patch posted to the list for lines -1389,9 +1390,10 a couple years ago, it helped some - BUT - it was still buggy. I have a Compaq R3000, I will get this patch integrated pronto and test Note that since the UPS relies on the voltage from the battery pack to determine state of charge, it is quite useful to add in the battery pack

Hi, Trying to rotate the ups.log on a FreeBSD 7.0 system and its not being nice about it. I tried the "quick and dirty" way by doing : mv /var/log/ups.log ${DATEDDIRECTORY}/ups.log kill -1 `cat /var/db/nut/upslog.pid` I get : Sep 17 10:57:20 valhalla upslog[81972]: could not reopen logfile /var/log/ups.log: Permission denied So I stop upslog, remove the file, and start it

Hi Thanks for a very nice piece of software. I have a tiny suggestion for upslog.c. It adds a signal handler for the USR1 signal, which simply triggers it to abort the current sleep and log the requested now. I find it useful because my upssched-cmd can then killall -USR1 upslog to ensure that there is an entry in the log for brief power dropouts which would otherwise be unrecorded (because

Citeren "David C. Rankin" <drankinatty at suddenlinkmail.com>: > Discharged battery.voltage: > > 17.4 Volts - (indicated on shutdown, discharging battery.charge 77%) > 16.9 Volts - (indicated on shutdown, discharging battery.charge 51%%) > 16.6 Volts - (indicated on shutdown, discharging battery.charge 33%) > > -- Shutdown Occurred at < 3% -- Battery

On 2/20/2014 6:55 AM, Charles Lepple wrote: > On Feb 19, 2014, at 12:50 PM, Ted Mittelstaedt wrote: > >> Worse, however, is if there's a power failure right near the end of >> the 2-days-off cycle. That happened to me last week - it was a >> short duration 15 second loss - and the upscode2 driver decided it >> needed to issue a forced shutdown. >> >>

On Feb 4, 2014, at 9:05 AM, Chris Duffy wrote: > ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON [...] > idVendor = 0x06da > idProduct = 0x0005 This VID:PID combination should be handled by blazer_usb. In NUT 2.7.1 and later, this would be covered by nutdrv_qx as well. > I am running all the ups programs as root, i.e. "ps -aux" shows:

I see this in syslog: Aug 12 03:57:22 orion upsd[18274]: Data for UPS [a102-apc-10] is stale - check driver (one for each UPS). Then I see a bunch of messages like this: Aug 12 03:58:02 orion upsd[18274]: write() failed for ::1: Broken pipe Aug 12 03:58:02 orion snmpd[2872]: Connection from UDP: [127.0.0.1]:50940 And then it returns to normal like this: Aug 12 03:58:04 orion upsd[18274]: UPS

I upgraded from V2.2 to V2.4. I use the "upslog" command to log the values of my belkin ups (belkinunv via serial port). It would occasionally start to record garbage, but it would always go back to normal in V2.2 if I restarted. In V2.4 it would not record the values, and the process would fail after the next interval had passed. I had set if for 300 seconds. I walked through the

2005/12/15, Alexander V. Inyukhin <shurick@sectorb.msk.ru>: > > Package: nut > Version: 2.0.2-2 > Severity: wishlist > > Hello. Hi Alexander, I think it is a good idea to log ups variables to rrd > database instead of log file. So, I create standalone > rrd logger dervied from upslog nut client. > Of course, this could be easily implemented using > upsc or

Hi Andy, On Dec 8, 2014, at 7:07 PM, Andy Juniper <ajuniper at freeuk.com> wrote: > It adds a signal handler for the USR1 signal, which simply triggers it to abort the current sleep and log the requested now. I will admit that I'm not an expert on how signals interrupt system calls on all systems, but for what it's worth, the code looks good to me. Is it correct to assume that

Charles, We run everything as "root" :) However, we are using NUT 2.6.5. Are we missing something by running 2.6.5 rather then 2.7.1? If so, I can build/install 2.7.1. Thx chris Would On 2/4/14, 9:05 PM, Charles Lepple wrote: > On Feb 4, 2014, at 9:05 AM, Chris Duffy wrote: > >> ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > [...]

On Sun, Nov 16, 2008 at 11:08 AM, Arnaud Quette <aquette.dev at gmail.com> wrote: >>> The remainder, until the -pre stage, will be: >>> - the Powerman support (through the powerman driver) for more PDUs >>> - the possible RRD integration into upslog >> >> It would be nice to have native RRD support in upslog, but we may also >> want to point

Os is redhat enterprise, kernel 2.6.18-164.2.1.e15 NUT is apparently 2.4.1 It was installed by tar. Monitoring a lot of apc UPS units-mostly Smart-UPS of various flavors, also a Silcon DP380E. Normally works just fine... "upslog" writes status log every 30 seconds with various parameters.. Every so often, one of the UPS units has a log entry of:

Hi, Folks, I'm new to this admin game, and one of the hardest parts for me is figuring out where files/programs/data are stored in the file system. I think this is one of these situations. I've installed NUT on my Mac OS X 10.5 server, using the macports build. The machine is a dual processor G4 tower, connected to an APC UPS via USB. usbhid-ups seems to be working, see output

Hi Charles, On 10/12/14 14:27, Charles Lepple wrote: > Hi Andy, > > On Dec 8, 2014, at 7:07 PM, Andy Juniper <ajuniper at freeuk.com> wrote: > >> It adds a signal handler for the USR1 signal, which simply triggers it to abort the current sleep and log the requested now. > I will admit that I'm not an expert on how signals interrupt system calls on all systems, but