similar to: USBHID-PDU datagram

Hello, since I had delayed the programming of the UPS Device part, now it is time to continue... My Device is "24 V DC modular ATX PSU" which replace the standard ATX Power Supply in PCs and use 15-43 V Input Voltage. The microcontroller is a TI LM3S5T36 Cortex M3 and I get the "UPS" infos using up to 4 Maxim DS1780 and some I?C current sensors. The ATX PSU has 4

Hello Charles, Am 2008-03-13 19:27:27, schrieb Charles Lepple: > Another advantage of going the HID PDC route (regardless of whether > NUT is involved) is that the device is essentially self-describing. If > the first version does not have a shutdown flag, but later versions > do, then very little driver code needs to change - just device > firmware. > > Also, I believe that

Hello *, I have an All-In-One intranet server <samba3> and usualy a seperated <router> as default gateway, which connect me using HSPA to the internet Now I have installed an Huawai K3765 on my <samba3>, installed "pppd" + usb-modeswitch and removed the default gateway to <router>. OK I can continue surfing trough the <router> and <samba3> is

Hello, Since I have now nearly all stuff running on my LH7A404 and now I am working on my DS80C411, I like to know, whether NUT show the APC UPS stats like the APC tools. Currently I do not know, HOW NUT triber the USB-Poert to get out the infos of the UPS. In theory I do send out only arround 5-60 lines of data which then NUT or any other programs must parse or something

Hi Guys, asterisk drive me crazy! Now I have tried to use FreePBX but it require MySQL which I can not install du to a conflict with PostgreSQL. Does someone know, how to configure FreePBX to use PostgreSQL? Or does someone know another Asterisk Web-Frontend, without Database? It is realy not funny, to force users to install this monster on an ARM Microcontroller. I need only enterprise

Hello Developers and *, I am working on a "24V DC ATX PSU" for Photopholtaik Systems which can have input voltages from 18V to 27.7 Volt and is entirely modular, which mean, you can select the desired module/s (up to 6) from ATX (96/144/240/300W), P4 (144W), SATA (82/305W) and Device (34/68/136W) And last not least, I want to build a "PowerWhatch" module which should be

Hello Xen-Users, I am running a Debian GNU/Linux Devel-Station (P2/366 MHz, 512MByte) and use currently chroots which give some problems from time to time. I have following configuration: ----8<------------------------------------------------------------------ /dev/sda1 / 7700 GByte # Master System /dev/sda2 swap 256 MByte # Master System /dev/sda3 /var 512 MByte # Master System

I've recently been working a bit on adding PDU (http://en.wikipedia.org/wiki/Power_distribution_unit) support in NUT. Some of you might have seen the Powerman thread, which also deals with adding more PDUs support: http://powerman.sourceforge.net/supported.html The result is that we now have support for 2 Eaton | Powerware ePDUs (Managed and Monitored iirc, check http://www.epdu.com). I plan

Hello, I am looking for ideas and suggestions. I want to use a 16 port GSM gateway as a trunk for outbound/inbound. I will also have two PSTN phone lines coming into the Asterisk server. All calls will go to an IVR on the Asterisk PBX. Outbound from extensions will route to GSM-GW when the dialed number matches a pattern set in the GSM-GW trunk. And accordingly for the PSTN trunks. But that's

Sorry for posting again, but because the subject.Hi All, I have 5 servers each: Intel Quad Core i7 2.4Gig (8 processors)2 *1TB HDD2*1Gig NIC12G RAM I installed XCP 0.5 on each and all are joining a resource pool.Then I installed 2 Centos 5.5 VM on each XCP host and I used the following command to specify the number of vCPUs for each VM: xe vm-param-set uuid=$VM_UUID VCPUs-max=4xe vm-param-set

* Is there a way to configure NUT so that it recognizes the huge additional battery pack that has been attached to the 2200XL? The 51minutes runtime is a number consistent with the load we have placed on a stock standalone 2200XL. With the extra large battery pack we've added, the runtime should be more than 2.5 hours. * I see the "Bizzare configuration" graphic on the

(CC-ing to mailinglist that is about syslinux and extlinux) On Thu, May 11, 2006 at 02:24:33PM +0200, Michelle Konzack wrote: > Am 2006-05-09 15:22:29, schrieb martin f krafft: > > also sprach Michelle Konzack <linux4michelle at freenet.de> [2006.05.07.1442 +0200]: > > > 2) mkdosfs -F 16 /dev/sda1 > > > 3) syslinux /dev/sda1 > >

Hi, I'm running a Active Directory domain on Samba 4.0.1 and I'm trying to join a Solaris 11 machine this domain: # smbadm join -u Administrator DOMAIN After joining DOMAIN the smb service will be restarted automatically. Would you like to continue? [no]: yes Enter domain password: Locating DC in DOMAIN ... this may take a minute ... Joining DOMAIN ... this may take a minute ... failed

Hello, I've packaged NSD for Solaris and it's available on OpenCSW. --> http://www.opencsw.org/packages/CSWnsd The package can be easily installed with "pkg-get install nsd". It works out of the box and it contains an SMF manifest for Solaris 10. Feedback is always welcome. Ihsan -- ihsan at dogan.ch http://blog.dogan.ch/

Hi, I've noticed that Dovecot is using per default the elliptic curve sect571r1. Because not all clients might support sect571r1, I would like to set the elliptic curve manually. Is that possible? -Ihsan -- ihsan at dogan.ch http://blog.dogan.ch/

On 03/01/2015 08:53 AM, Jim Pazarena wrote: > I wonder if there is an easy way to provide dovecot a flat text file of > ipv4 #'s which should be ignored or dropped? > > I have accumulated 45,000+ IPs which routinely try dictionary and > 12345678 password attempts. The file is too big to create firewall > drops [...] The inherent assumption here is that dovecot, using a

On 04/09/2015 06:46 PM, mimicafe at gmail.com wrote: > What other software (ideally open source, free) do I need in other to have > Calendar and address book so my users can manage their contact on their > phones or computer? I have looked at Roundcube already, but my requirement > is not necessarily to provide web mail. The keyword you're looking for is "groupware" -

TURKIYE'DE BIR ILK !SADECE 15.000.000 TL HACKER ve GUVENLIK REHBERI CD'SI Hack ve Guvenlik konusunda bilmek istediginiz hersey, ihtiyaciniz olan her program bu cd'de. Sadece 15.000.000 TL ye bu cd'ye sahip olabilirsiniz! Siparis icin: 0546 599 64 54 Turkiye'de bilisim guvenligi alaninda bir ilki gerceklestirdik, ve sizlere icinde binlerce dokuman ve program bulunan

On 03/04/2015 09:45 PM, Dave McGuire wrote: > On 03/04/2015 03:37 PM, Oliver Welter wrote: >> Am 04.03.2015 um 21:03 schrieb Dave McGuire: >>> Am 04.03.2015 um 20:12 schrieb Michael Orlitzky: >>>> Please add [DNSBL] support to iptables instead of Dovecot. It's a waste of >>>> effort to code it into every application that listens on the network.

On 03/04/2015 05:03 AM, Earl Killian wrote: > I would like to reiterate Reindl Harald's point above, since subsequent > discussion has gotten away from it. If Dovecot had DNS RBL support > similar to Postfix, I think quite a few people would use it, and thereby > defeat the scanners far more effectively than any other method. It is > good that other people are suggesting things