similar to: Newbie howto

Hello list, I'm fresh in using an ups for shutting down a linux server and i was thinking someone could give a hand at debugging a problem i stumbled to. I'm used to the redhat type of distribution, mainly centos 4/5, and off-course i installed nut and nut-client from the available rpm packages. After some reading i disconnected the server from the power supplied by the ups and

Hello list, I'm fresh in using an ups for shutting down a linux server and i was thinking someone could give a hand at debugging a problem i stumbled to. I'm used to the redhat type of distribution, mainly centos 4/5, and off-course i installed nut and nut-client from the available rpm packages. After some reading i disconnected the server from the power supplied by the ups and

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

Help!! I have been trying to get Dovecot configured to allow plaintext auth with no success. After some testing with the mail system I discovered the >dovecot -a commant to dump the config file values from the program. Gee, changing the value of disable_plaintext_auth had no effect on what the program reported this value to be! To eliminate possible errors caused by other config file

Hello list ! Yesterday a made time to test the shutdown sequence of the server with the ups on battery. All went fine except that the ups didn't shutdown by itself. The problem is that if the power comes back until the battery completely drains and the server is stopped then the power comes back and the ups is on line but the server remains off. I mention that is set in bios to

This patch file will allow the MDI example to run. We''ll need to revisit it later. There''s still a crash but it''s the same crash as from the scrolled window example. I''ll send a patch later that fixes the problem with DrawLines. Roy _______________________________________________ wxruby-users mailing list wxruby-users@rubyforge.org

Dear all I'm realy new to R, so I hope you can help me, as I didn't find any solution in the common books. Since some days I'm trying to create the following plot: A scatterplott showning two different groups side-by-side with according regression lines. Both datasets only have the same five factors, so the scatters will form a kind of column at each factor. When I use

Hi all, I have install G729 license to asterisk 1.4.18 and use distro debian etch 4r2. It'snot complete. when i use ldd commant to show the library it show "/usr/lib/aserisk/modules/codec_g729a.so: /lib/libc.so.6: version 'GLIBC_2.4' not found (required by /usr/lib/asterisk/modules/codec_g729a.so) when i check the GLIBC version on debian it is glibc-2.3.6 please advice me

Hello. I create RoundCube plugin and I have question. I want add mail header and I see 2 way: 1) change file via filesystem (mailbox in maildir format); 2) change header via dovecot. I think 1) bad way. But I do not know dovecot support change head information or not? My by via IMAP commant? same programm (LDA?)? May be it impossible via dovecot?

Hi everybody: I just generate interpolation maps with differents methods, like IDW and kriging, and now i want to compare the predict values versus real, and i don't who is the commant to do it. I want for example, if I pass from console the coordinates of a place, return me the predict value. Could anybody tell me how should do?. Thanks in advance --

I'd like to share some of my experience with this UPS. I've compiled nut from the Debian sid sources. Version is 2.2.1. I'm using the powerpanel driver. It seems shutdown.return does in fact what shutdown.return should do. I'll just copy&paste some of my notes made yesterday: Commands were issued as follows: "upscmd -u admin -p admin bbox at localhost

Hi, I would like to report that Tuncmatik Newtech Pro 1 KVA (http://www.tuncmatik.com/en-US/productDetail.asp?RecID=290) works with nut(2.4.1) blazer_usb, blazer_ser and megatec drivers. The UPS came with an usb cable and a java based software for both linux and windows, named ViewPower (http://www-power-software-download.com). This UPS has double interface a USB interface and a serial

Sorry, I should have really started a new thread with this because really it is a new question only loosely related to the first Q. Thanks for the assist. As suggested I switched over to sweave. I have a lot of .tex tables that I > have already created that I was previously inserting into my tex document > (using \input). The journal I plan on submitting to eventually wants the >

Hi, I recently got a new UPS, the model is TriPro Power Plus UPS 1000VA and it comes with a USB cable, anyone knows what model/driver i need to use ? When i connect the UPS to my linux system (CentOS 3.3, Kernel 2.4.21) the following information is written to the logs: kernel: hub.c: new USB device 00:11.2-2, assigned address 2 kernel: usb-uhci.c: interrupt, status 3, frame# 235 kernel:

Folks, I'm fairly new to this whole Linux UPS thingie, but I'd quite like to have a look at getting my UPS to work under Linux and would be grateful for any help in getting a driver. I have a reasonable working knowledge of Linux and software development, and thus am happy to modify config files, alter kernel settings, etc, although I'm no C guru. I have a Kebo UPS-650D, which

Device manufacturer: Fideltronik INIGO Device name: Viper 1200 Device type: UPS Bus type: USB WWW: http://fideltronikinigo.com/viper/viper-1200/ " nut-scanner -U" output: [nutdev1] driver = "blazer_usb" port = "auto" vendorid = "0001" productid = "0000" product = "MEC0003" vendor =

hi, i try to get this tsize capable tftpd running, but it doesn't fork. (as read the strace output and the process table) strace: 9122 execve("/usr/sbin/in.tftpd", ["/usr/sbin/in.tftpd", "-u", "nobody", "-s", "/var/tftpboot/"], [/* 35 vars */]) = 0 9122 uname({sys="Linux", node="saturn", ...}) = 0 9122

http://bugzilla.mindrot.org/show_bug.cgi?id=88 ------- Additional Comments From markus at openbsd.org 2002-01-31 23:01 ------- this is an installation error on the target host, see: scp: warning: Executing scp1 compatibility. scp: FATAL: Executing ssh1 in compatibility mode failed (Check that scp1 is in your PATH). ------- You are receiving this mail because: ------- You are the assignee

Hi Jeffrey, Listed below the Full valgrind report (using latest revision r99309) The program creates many thousands of instructions and values as you can see from the report below ==20504== Memcheck, a memory error detector ==20504== Copyright (C) 2002-2009, and GNU GPL'd, by Julian Seward et al. ==20504== Using Valgrind-3.5.0-Debian and LibVEX; rerun with -h for copyright info ==20504==

Hi I get huge memory leaks using LLVM IRBuilder (trunk version) Basically I recreate a function over and over again, and pretty sure that my code doesn't cause the leak while(true) { Function *fn = module->getFunction(name); if (fn) fn->eraseFromParent(); fn = cast<Function>(module->getOrInsertFunction(name, fnType)); fillFunction(fn); //Fill function with