similar to: Four UPS's via usb.

Hi nut-upsdev, I have just got OMRON BX35F. Only object files and usage information is included. Where should I start to help you to get it supported? Any interest in supporting it at all?

On Sep 6, 2014, at 4:16 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote: > Oh, hey! That seems to have worked. I'm sure the UPS got plugged into a different port one of the (many) times the server was removed from the relay rack, and it was on a USB 3.0 port. I moved it to a 1.0 port and everything seems to be working just fine. The specifics of the motherboard and its USB

On 9/6/2014 12:47 PM, Charles Lepple wrote: > On Sep 6, 2014, at 12:39 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote: > >> I made a number of hardware and software changes, including an upgrade to the latest software versions for that distro (Debian Wheezy), > > Can you be more specific about the changes? Well, I did an automated upgrade (apt-get upgrade), I changed

Hi All, I get very strange UPS problem from RspberryPI mode B (both version 2 and 3). Here is our environment: OS: Raspbian 8.0, Ubuntu 16.04 and Ubuntu 14.04 Platform: RaspberryPi Mode B version 2 and version 3 NUT: tested version 2.6.3, 2.7.1 and 2.7.2 (from

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

Is that with both UPSes on same machine? A quick guess would be that insufficient data points to identify the device are configured (vendorid, productid, serial...) in ups.conf, so both drivers connect to the first match. I'd expect them to conflict and one would die or both loop reconnecting, if both are running at once, though. Also, which NUT version? Custom build from GitHub or an

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Bonjour, Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous) DaneZ _____ From: DaneZ [mailto:david.guillotte@danez.no-ip.org] To: arnaud.quette@mgeups.com Sent: Sat, 08 Jul 2006 23:24:06 +0200 Subject: Fw: INFOSEC 500 XP en USB _____ Bonjour Arnaud, Je me

I tried dd-ing the ISO onto a USB stick, as suggested in <http://wiki.centos.org/Manuals/ReleaseNotes/CentOS7>, but it didn't boot. Did anyone have better luck with this? In any case, I got it working by running livecd-iso-to-disk on a Fedora-20 laptop. I've found before that this is the best program around for the purpose. But I've 2 queries about this: 1. Why isn't this

Roman, I don't think I already asked, but could you post the output of lsusb -v -d 06da:0003 Just to be sure that we're not exceeding some buffer limitations of the device. Best regards, Arjen -- Please keep list traffic on the list

Here are all the usbconfig outputs you have requested. I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType =

Ok guys I get this errors: Network UPS Tools ? UPS driver controller 2.4.1 Network UPS Tools ? Generic HID driver 0.34 (2.4.1) USB communication driver 0.31 No matching HID UPS found my ups.conf is: [ap1000] driver = usbhid-ups port = auto I?ve also tried to set a specific usb port and change driver. My ups is a AMACROX 1000 http://www.amacrox.com//english/01_product/02_01detail.aspx?pdid=46

Hi, Sometime ago [ June 2018 ] I posted a message about getting trying to get NUT to work with a Power Shield Defender 1200VA UPS. This model appears in the HCL at https://networkupstools.org/stable-hcl.html That UPS reported the following when queried using 'lsusb' on an iMac running macOS [ 10.15 ] Bus 001 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor:

On Feb 18, 2014, at 10:15 PM, Charles Lepple wrote: > On Feb 18, 2014, at 5:55 PM, Thiago Tiedtke dos Reis wrote: > >> Hi, >> >> Recently I got three units of this nobreak [0]: > ... >> [0] http://www.sms.com.br/produtos/Nobreak-SMS/Manager-III-Senoidal > > According to the HCL, for the Manager III, you might want to try the blazer_ser (or in 2.7.1,

Hi, Has anyone had success with the Dynamix 650VA, that uses the USB cable? I can't get megatec_usb to recognize it, I have tried both stable and development versions. Regards Glen Ogilvie

I was getting: "Can't claim USB device [0764:0501]: could not detach kernel driver from interface 0: Operation not permitted" so I manually installed the udev rules the source (I installed the Gentoo ebuild). I am now getting: # upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using

I looked through the faq, but couldn't find an answer to this. I'm trying to configure nut-2.0.4-26 on SuSE linux 10.2. In ups.conf, I have [myups] driver = belkinunv port = /dev/undefined desc = "Local UPS" I'm trying to find out what the port should be set to. lsusb shows: Bus 001 Device 005: ID 050d:0980 Belkin Components Device Descriptor: bLength

Hi all, I?ve a UPS Liebert GXT3 500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength

Hi Arjen My apologies fro drifting off topic in the other mailing list...:-) On the bottom of the Belkin UPS unit - is the model number: F6C120auUNV The "au" is for Australia I think. "man belkinunv" states that F6C120-UNV is supported - and I assumed that the "au" would not prevent this. I plugged in the USB to gather the information you requested. My intention