similar to: Powercom black knight 800AP (serial)

Mr Claesson, with my current configuration, the ups.status when the UPS is disconnected from the mains is "OB". There is no more "OB BOOST". Now my upsd.users is: [root] password = password allowfrom = localhost upsmon master actions = SET instcmds = ALL and upsmon.conf is: RUN_AS_USER root MONITOR Inform@localhost 1 root password master MINSUPPLIES 1 SHUTDOWNCMD

Hey all, Does anybody know there is a full working setup for the PowerCom BNT-1500AP. I got some stuff working with the Powercom driver and the type set to "KIN1500AP". But it seems that there is still missing usablity. I was wondering if anybody found any better configs? ---- excerpt of ups.conf [AVR1500] driver = powercom port = /dev/ttyS0 desc =

Dear Mr Claesson, prepare for quite a long letter from me. I hope you will have time to read it. I bestowed a whole morning on trying to identify the correct upstype. Here are the results: root@marto:/home/marto# /usr/local/ups/bin/powercom -DD -u root -a Inform -x type=KP625AP Network UPS Tools - PowerCom and similars protocol UPS driver $ Revision: 0.5 $ (2.0.4) debug level is '2'

So, this is the result of upsc Inform@localhost with the UPS connected to the mains: battery.charge: 97.7 driver.name: powercom driver.parameter.linevoltage: 220 driver.parameter.port: /dev/ttyS0 driver.parameter.type: KIN1500AP driver.version: 2.0.4 driver.version.internal: $ Revision: 0.5 $ input.frequency: 49.61 input.voltage: 236.3 input.voltage.nominal: 220 output.frequency: 49.10

Good afternoon. I try to put nut on gentoo. Has executed installation by a standard command emerge nut. All has passed successfully. I use UPS POWERCOM BNT-1500AP. It is connected to serial port 1, i.e. for my system it/dev/tts/0. In/etc/nut/ups.conf [powercom] driver = powercom port = /dev/tts/0 desc = "PowerCom BNT-1500AP on IP-PBX" modelname = "BNT-1500AP" linevoltage = 230

Hi, I've sent the following message 3 weeks ago, yet have recieved no reply at all. I don't want to nag, but could anyone please help me? Thanks, Dror ------------------ Hi, I have a UPS of the Israeli company Sustainer, model S-1000C (http://www.sustainer.co.il/data/files/specifications%20smart%20en.pdf - don't worry, it's in english...). I've been trying to connect to

Hello I have UPS Powercom Black Knight Pro 1200 (BNT-1200AP) I try to use nut, but powercom driver not understand my model Ok, i try to use type KIN1500AP and it's work But powercom driver can't set UPS's shutdown delay time Also i have powercom's original program (upsmon), and this program can do it What can i do for help to add this function to nut's powercom driver? For

Hello. I've been trying to got it work but haven't luck. I'm using NUT 2.6.0-1 under Windows XP with libusb driver installed (USB\VID_0D9F&PID_0004&REV_0001). I had tryed all options with such config: *PWCOM] driver = usbhid-ups port = auto vendorid = 0d9f desc = "Powercom BNT-800AP" type=BNT* * *Here is output from CMD:*

Hello! After I type "upsmon", in syslog the following message appears: Aug 16 14:11:09 marto upsmon[7731]: Master privileges unavailable on UPS [Inform@localhost] Aug 16 14:11:09 marto upsmon[7731]: Reason: Access denied Can you tell me where my error is, my configuration files are: ups.conf: [Inform] driver = powercom port = /dev/ttyS0 desc = "inform guard" linevoltage = 220

Hello, I'm new there. I bought an UPS Powercom BNT-600AP. It's compatible in NUT with driver powercom and protocol type KIN1500AP. But I have a simple problem: the 'upsc' shows wrong values in battery.charge (maybe in other rows also /ups.load, voltages?/) - if battery is 100% charged it shows only 92.6% or 93.0%. I thing I have wrong values in driver parameters: batteryPercentage,

Hello all. Try this driver (for nut 2.2.0). See attach. - Trust, KP625AP, Egys models stay as it was - add Powercom's Black Knight Pro model support ( BNT-400/500/600/800/801/1000/1200/1500/2000AP 220-240V ) - add Powercom's King Pro model support ( KIN-425/525/625/800/1000/1200/1500/1600/2200/3000/5000AP[-RM] 100-120,200-240 V) - add Powercom's Imperial model support ( IMP-xxxAP,

All, I'm using the Powercom driver from 2.2 (not the one recently mailed to thelist). Since it's a KIN2200AP, I'm using the driver settings right from the manpage. All the values look "sane" when I'm on-line, but note some of the odd values (<-- Here) when on battery: Also, does anyone know if this UPS supports logging of the "boost" or

Hi Have been trying to get nut and Powercom Vanguard 2000 ups communicating ? in the /lib/udev/rules.d/52-nut-usbups.rules file we have this entry #? PowerCOM VGD - Vanguard? - usbhid-ups ATTR{idVendor}=="0d9f", ATTR{idProduct}=="0004", MODE="664", GROUP="nut" ? In the /etc/ups/ups.conf [UPS] ??????? driver = usbhid-ups ??????? port =

Hi guys, We've got a BNT-1000AP (powercom) BlackKnight UPS that works with the KIN1500AP model in the powercom driver. Well, almost. It seems the input frequency and the battery charge is swapped around: # upsc blackknight at localhost battery.charge: 46.5 driver.name: powercom driver.parameter.manufacturer: BlackKnight driver.parameter.modelname: BNT-1000AP driver.parameter.port:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Has anyone used nut with a XPCC UPS, in particular one of the XVRT units? Their supplied monitoring tool "works", but I'd really prefer to use nut if possible. I've systematically gone through each of the drivers in /lib/nut and none seem to talk with the unit properly. I'll be talking with a XPCC support person tomorrow, though

While fundamentally working, I'm having a few issues with the driver... The default voltage quads (for every model) are way off... Showing ~95v when it should be ~117V. I've changed the 4th/final coefficient to +5.0, but haven't tested extensively (with fluctuating voltages). The input/output voltage appears to be swapped _most of the time_. When doing a battery test, or when

Dino, Alexey, there are a number of users suffering issues with your Powercom devices. Could you (Dino, and Keven if possible) please have a look at the below one, from Angela, and check for a fix? I've scheduled to release 2.6.1 next week, and having that fixed is part of the list. 2011/5/16 Angela Williams <angierfw at gmail.com> > Hi All > > On Friday 13 May 2011 at

2008/10/18 Sergiy Yegorov <prapor at unixzone.org.ua>: > Dear Arnaud! Hi Sergiy and Alexey, > Please, check this patch. It adds USB-attached Powercom UPS Imperial & > Black Knight series. Originaly code is writed by Kirill Burdin > (burdin at post.ru) for Imperial UPS`es. > I`m just sysadmin without enought C programming > skills, so I adapted it to nut-2.2.2-6

Hi, I have a UPS of the Israeli company Sustainer, model S-1000C (http://www.sustainer.co.il/data/files/specifications%20smart%20en.pdf - don't worry, it's in english...). I've been trying to connect to it from Debian to no avail for a long time now. The company has attached to it a program called Commander Pro (for windows) and RPMs of UPSmart for old versions of Redhat and

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20070205/5ad69acc/attachment.pgp