similar to: OMRON BX35F

On Sep 6, 2014, at 4:16 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote: > Oh, hey! That seems to have worked. I'm sure the UPS got plugged into a different port one of the (many) times the server was removed from the relay rack, and it was on a USB 3.0 port. I moved it to a 1.0 port and everything seems to be working just fine. The specifics of the motherboard and its USB

On 9/6/2014 12:47 PM, Charles Lepple wrote: > On Sep 6, 2014, at 12:39 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote: > >> I made a number of hardware and software changes, including an upgrade to the latest software versions for that distro (Debian Wheezy), > > Can you be more specific about the changes? Well, I did an automated upgrade (apt-get upgrade), I changed

> Hello everyone. I try to connect four PowerMust 2000 ups's via usb to one > computer using megatec_usb driver. But megatec_usb completly ignores port > directive in ups.conf, I even try port = /dev/null and megatec_usb founds > ups and it works. The 'port' is not used for USB connected devices, it's only needed for compatibility reasons. > Problem is that

Bonjour, Je souheterais utilis? la version qui permet le '-x generic',mais je ne sais pas ou la recuperer car ca devrait solutionner mon probleme (cf mail ci-dessous) DaneZ _____ From: DaneZ [mailto:david.guillotte@danez.no-ip.org] To: arnaud.quette@mgeups.com Sent: Sat, 08 Jul 2006 23:24:06 +0200 Subject: Fw: INFOSEC 500 XP en USB _____ Bonjour Arnaud, Je me

I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to connect it using USB. lsusb -v says: Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

I recently took over maintenance of a linux computer which is drawing power from a "Maruson Power Net 1500" UPS. However, there is currently no monitoring or control of the UPS by this (or any other) computer. Can nut control this device? There are serial, usb, and EPO connectors on the back of the unit. (There may be a manual but I'm going to have to hunt for it.) Thanks, David

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi, I'm new in the list and I'm having a little bit trouble to put the megatec_usb to work. I've been using NUT for a while with the apc and megatec driver (serial), with no problem. The server is a Ubuntu 8.04.2 with NUT version 2.2.1-2.1ubuntu7.2, the default package version in this ubuntu release. I've configured the ups.conf as follows: [sms] driver = megatec_usb

Hi All, I get very strange UPS problem from RspberryPI mode B (both version 2 and 3). Here is our environment: OS: Raspbian 8.0, Ubuntu 16.04 and Ubuntu 14.04 Platform: RaspberryPi Mode B version 2 and version 3 NUT: tested version 2.6.3, 2.7.1 and 2.7.2 (from

Is that with both UPSes on same machine? A quick guess would be that insufficient data points to identify the device are configured (vendorid, productid, serial...) in ups.conf, so both drivers connect to the first match. I'd expect them to conflict and one would die or both loop reconnecting, if both are running at once, though. Also, which NUT version? Custom build from GitHub or an

Hi, Sometime ago [ June 2018 ] I posted a message about getting trying to get NUT to work with a Power Shield Defender 1200VA UPS. This model appears in the HCL at https://networkupstools.org/stable-hcl.html That UPS reported the following when queried using 'lsusb' on an iMac running macOS [ 10.15 ] Bus 001 Device 008: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor:

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

Hello! At first, i want to run the latest HandBrake (version 0.93) on a Mac with Mac OS 10.4 (Tiger). The problem is, that Handbrake is developed for Mac OS 10.5 (XCode SDK is not compatible to Mac OS 10.4 one). So i decided to try it with wine/darwine. Because wine is better supported on Linux and you can get easier newer version (apt-get), i decided to run HandBrakeCLI.exe on Debian Etch

On Feb 18, 2014, at 10:15 PM, Charles Lepple wrote: > On Feb 18, 2014, at 5:55 PM, Thiago Tiedtke dos Reis wrote: > >> Hi, >> >> Recently I got three units of this nobreak [0]: > ... >> [0] http://www.sms.com.br/produtos/Nobreak-SMS/Manager-III-Senoidal > > According to the HCL, for the Manager III, you might want to try the blazer_ser (or in 2.7.1,

Roman, I don't think I already asked, but could you post the output of lsusb -v -d 06da:0003 Just to be sure that we're not exceeding some buffer limitations of the device. Best regards, Arjen -- Please keep list traffic on the list

Hi all, I?ve a UPS Liebert GXT3 500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength

----- On Sep 23, 2015, at 9:26 AM, Charles Lepple clepple at gmail.com wrote: > On Sep 23, 2015, at 9:22 AM, Louis G. <louis at frentzgzesh.info> wrote: >> >> >Can you open up a root shell, kill the old `usbhid-ups` process, and run it from >> >the command line? >> > >> > /usr/local/libexec/nut/usbhid-ups -a ups -DDD >> > >>

Hi, Has anyone had success with the Dynamix 650VA, that uses the USB cable? I can't get megatec_usb to recognize it, I have tried both stable and development versions. Regards Glen Ogilvie

On Sep 10, 2015, at 8:49 AM, Rob Groner <rgroner at RTD.com> wrote: > > Charles, > > 3.16.6.-2-desktop I think that corresponds to this file: http://lxr.free-electrons.com/source/drivers/usb/core/devio.c?v=3.16 (but I don't see anything obvious there) What does "lsusb -vvv -d 2a37:" return? Usually I'd say run that as root when the driver isn't running,