similar to: Megatec_usb driver

Seems to be broken in the current SVN: [...] x86_64-linux-gnu-gcc -I../include -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -DINET6 -O2 -D_REENTRANT -DNETSNMP_USE_INLINE -Wall -Dlinux -I. -I/usr/include -O2 -Wall -Wsign-compare -s -o energizerups energizerups.o ../common/upsconf.o ../common/parseconf.o ../common/state.o main.o dstate.o

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2

Hi! I am trying to get an Atlantis-Land 1501 UPS to work under OpenBSD. The UPS works OK under Linux + megatec_usb driver+nut_2.2.2. What I get under OpenBSD is: root at puffwall:~ # dmesg OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel Pentium III ("GenuineIntel" 686-class, 128KB L2

Hi Alexey, Please post the output of 'lsusb' and 'megatec_usb -a sven_625 -u nut -DDDDD'. On Monday 15 June 2009 14:32:16 you wrote: > Package: nut > Version: 2.4.1-3 > Severity: normal > > I have a SVEN Pro+ 625 ups that uses megatec_usb driver. > In ups.conf I describe it like: > [sven_625] > driver = megatec_usb > port = auto > desc =

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hoi all, First of all thanks for all the great work on NUT. I have two identical Socomec UPS Netys 1000PE. One is connected to an Ubuntu Hardy 64bit system and is detected just fine by the driver (v1.5.9), see below. The other one is connected to a Debian Etch 32bit system and is not detected by the driver (v1.5.9), see below. Would you have any idea how I could further debug this issue? Could

Hey all, thanks for your work on nut. I recently got myself a new cheap UPS, and have thus far determined very little about it. I can run whatever you like to help identify and work with it. So far I've played around with various settings and have had some limited success with the megatec_usb driver (Debian testing version): ----ups.conf---- [plexus] driver=megatec_usb model=500VA mfr=Plexus

Greetings Gentlemen, I have Mustek NetGuard 1000 UPS which is equivalent to Ippon SmartWinner 1000. I have tried to run several latest builds of NUT, but run megatec_usb driver still failed with my device. I hope the information below might help. Regards, Oleg Here is the information which may help: lsusb -v Bus 002 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor:

Hi All, I am a newcomer to Nut, so firstly hello :-) I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was

Hi All, I am a newcomer to Nut, so firstly hello :-) I am keen to implement Nut and have been digging around most of the day to see how to get my two Unitek 1250xD UPS devices working. I have now managed to get nut installed (from source 2.2.0) and have (I think) success. I found a post here: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-December/003573.html which was

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

after I starting battery test on my laptop I see in my logs some error and ups (IPPON Smart Power Pro 1400. usb interface) isn't monitoring now [ippon] driver = megatec_usb port = auto desc = "local" Feb 16 23:22:09 f37 upsd[17150]: Instant command: stlk at 127.0.0.1 did test.battery.start on ippon Feb 16 23:22:12 f37 megatec_usb[17249]: ser_get_line: Device detached? (error

ut 2.4.1 works with megatec_usb driver. It tries to interact with a device in /dev/bus/usb/X/Y, but there are root:root 664 access rights. When I try to set port /dev/hiddev0 with write access in config file, in strace there are no records about accessing /dev/hiddev, but still only /dev/bus/usb/X/Y How to explain such a behavior? execve("./megatec_usb",

Hello again! Thanks to the precious help from Henning Brauer, I managed to solve an issue with my UPS (a rebranded UPS speaking in Ablerex-ese over USB). Under OpenBSD 4.3, the UPS was claimed by HID. Now that I recompiled the kernel, adding a USB_quirk, this is what I get when I insert the USB cable: ugen0 at uhub0 port 2 "UIS_ABLER USB to Serial" rev 1.00/1.00 addr 2 So far, so

2010/10/18 Michael Eitelwein > Hi Arnaud > Hi Michael, > Yes, did test it without success. > can you please post the first 20 seconds running blazer_usb in debug mode, ie: $ sudo /lib/nut/blazer_usb -DDD -a cyberpower aside from fixing the megatec situation, ensuring that you'll be able to run the replacement is also to be considered ;-) now, for the megatec issue, we need

Folks, I think the present megatec_usb.c deserves to be renamed to serial_usb.c. I think it potentially could serve many more UPS'es with built-in USB-to-serial converters, not limited to the megatec_usb driver (although that was the first one to use this). I also think a more layered approach would be nice, in the same fashion as the usbhid-ups driver with subdrivers. Which would mean that

Hello, I'm working on getting nut using a Powermust Office 650 USB USV. Using today's trunk megatec_usb detects its vendorid 0665 productid 5161 but uses the agiler driver for it which apparently does not work (timeout...). I think this device is using that USB-to-serial chip but a different protocol behind. I got the phoenix subdriver working with the device but I had to extend

Hi Heinz, 2010/5/30 heinz > Thank you for your nut-2.4.3 system. I had big troubles getting it to work > with the UPSONIC PROFFICE 650 UPS in USB mode. > > I had to rewrite the get_data_phoenix() function in drivers/megatec_usb.c > file. > It now appears to be working correctly. I have attached the source of the > modified function in case you might want to add it to a

Citeren Roman Mamedov <roman at rm.pp.ru>: >> Another useful thing would be to run the bundled driver on a Windows >> box while running 'usbsnoop' so that we can get an idea what it is >> doing. Maybe we're missing something here. I still would like to see that. > Keep in mind that the patched megatec_usb driver (which I use since > yesterday) can