similar to: Re: Nut-upsdev Digest, Vol 21, Issue 25

Hello everybody, After succeeded in "tuning" nut-2.0.0's hidups and 2.0.3's newhidups on customized Linux kernels, we are now facing a new challenge : trying to install nut-2.0.5 on a RedHat ES4 which is based on a 2.6.9 kernel. I picked up the 2.0.5 source package and follow the INSTALL doc until step 6. So far so good. RH ES4 is managed by udev, therefore I presume we

Hi everybody, If we let the feature running, it appears that the driver gets unbound after a while ( variable from quarter of hour to 6 hours ) and cannot reconnect. This behavior appear with both MGE Ellipse ASR and non-ASR models with connection to an UHCI and OHCI controllers. The USB core is from 2.4.28 kernel. We use nut-2.0.3. Start, powerfail and recovery detections, UPS shutdown work

Hi Arnaud, hi all I wish you all the best for 2006. Enjoying of some less stressed time, I follow your advice, Arnaud, to switch our UPS management on the newhidups driver. ( Enfin ! ;) Our goal is to support (soon) the new MGE ASR ELLIPSE ( and of course also the old ELLIPSE and EXTREME models ). I rebuild the libusb-0.1.10a packages to conform to our installation process. I perform the same

Greetings, I seem to have Samba+AD+ACL's working on a RH ES4 server; however, I'm looking for clarification in regard to how the ACL's differ between windows and samba... or if they differ? With windows ACL's, I can give out user permission traverse directory, but not read its contents. Then I can give said user more permission to a sub folders contents. Meaning: I

Hi all Arnaud, Some newly purchased Ellipse ASR-model UPS find their way to my office for a first evaluation test. It concerns the Ellipse 1500 and Ellipse 1000 models. As you know we are still working with hidups. Peripheral recognition, start of NUT, mains short interruptions management, all that work fine... as expected ;-) But changes occured on the delayed shutdown procedure after the

Having recently compiled and installed Samba3.0.23 on Redhat ES4 I find that ACL support is no longer working. I have just upgraded my Solaris and Redhat machines from Samba3.0.22 to the latest Samba3.0.23. These systems use the same smb.conf settings and have been operating fine with many previous versions of SAMBA. However the Redhat machine will not correctly honour ACL permissions, for

Hi. I am trying to run RubyOnRails with scgi on RedHat ES4. I want to direct all access of "/" to index.html I do have DirectoryIndex in httpd.conf. But after I run RubyOnRails, the configuration stopped working. I tried many things, but it doesn''t work. Like: RewriteRule ^$ index.html [QSA] RewriteRule ^/$ /var/www/public/index.html [R] If I access /index.html, everything

hi, i am running the latest centos 4.1 on a vmware esx server - i'm having an issue where all my iptables output is being echoed to the vmware primary console, yet my syslog conf is the same as on a rh es4 server.. anyone run into this before, or know how to shut the console logging of iptables off alltogether? also, i'm seeing "%2C" in some logs instead of spaces, and man

Hello everybody, Our supoprt team is facing a problem which froze the CPU. They suspect that this happens after an automatic battery test, which lets the battery goes down to 30% and then stop the test. At this level of charge, our kernel also triggers a shutdown (CPU and UPS). I saw (in the doc found here : tools.*mge*ops.net/download/intl/products/*ellipse*-asr/28-umeasr_08.pdf) that this

We are running Samba3.0.23b on Redhat ES4 and find that we are getting quite a few of the release_posix_lock errors appearing in the SAMBA log (See base of this note). There is no obvious impact on the operation of the system, but I was wondering if anyone else is experiencing the same and whether we need to worry about this. We have the default "posix locking=yes" in operation and

Hello We have successfully set up Red Hat Enterprise Linux ES4 and we are now trying to connect remote clients to connect to it. The problems we are having are as follows: a) If we set connect with telnet, we get the login prompt. If we use any valid login name & password combination (including root), we get the response "Login incorrect" and then the login prompt comes back. How

Hi, I think this is a samba problem but I'm not 100% sure :) When I am printing with the Cups 6 driver from windows to samba, to cups to my printer, only the postscript commands are coming out, raw. The cups log file says it's seeing application/vnd.cups-raw, and I had a look at a tcp dump of packets going to port 631, and indeed they do confirm that the IPP port is being told this. So,

Hello, thank you for the idea. I'm already behind the permission problem, which originally apeared, but I did overcome it by rules settings. this is the result for 'ls -l /dev/bus/usb/004/007': ---- crw-rw-rw- 1 root nut 189, 390 pro 23 13:23 /dev/bus/usb/004/007 ---- Os is Debian 6.0.5 Squeeze Regards Dee Dne 22.12.2014 v 13:01 nut-upsdev-request at lists.alioth.debian.org

Just wondering if this is a bug... If I use the Linux 'du' command on a mounted samba share the reported disc usage is way off (though it seems to report bytes ok with the -b flag). Eg. it reports 1.3T of data instead of 2.7G. Maybe it's a du bug? 10:13 AM: du -sxh * 1.3T flac 458G mp3 10:13 AM: du -sxm * 1337366 flac 468124 mp3 10:13 AM: du -sxb * 2735172988 flac

List: I am using Centos updated till date. Last night I shut down the system and X was working fine...today morning I start X and it does not work for my normal user. X starts for root & other users. The error output seems totally incomprehensibe and scrolls away from the screen too quickly. The /var/log/Xorg.0.log seems to have only the subsequent success of login of other user or I

I am running dovecot 1.0 beta3 as a front-end proxy, and getting the following error when using epoll. The error goes away if I switch to poll. On the backend IMAP server I see that the login was successful. The error occurs when I try to retrieve an email or get a folder listing via IMAP after logging in successfully... Feb 9 15:35:57 director4 dovecot: imap-login: proxy(bboebel at

These instructions are prefix selected flavors of bsf and bsr respectively, and hence the presences of the F3 prefix must be handled in the emulation code in order to avoid running into problems on newer CPUs. Signed-off-by: Jan Beulich <jbeulich@suse.com> --- a/xen/arch/x86/x86_emulate/x86_emulate.c +++ b/xen/arch/x86/x86_emulate/x86_emulate.c @@ -1058,6 +1058,9 @@ static bool_t vcpu_has(

Hi there, I've recently configured a new server on our network...still having some (newbie) samba issues: Whenever anyone tries to access the new share they get prompted for a username and password (these would smb users and passwords and not the windows AD details, right?). I want the share to be accessed by anyone with the correct group permissions without this prompt... I did

I have created a lattice bwplot that suffers from axis label overplotting. The box plot contains grid lines, and I thought that only plotting the labels for corresponding vertical grid lines would not only cure the overplotting but also be more aesthetically pleasing. Unfortunately hours of poring over manuals, documentations, mailing list archives, and other R-related text hasn't helped.

Hello all, I experienced a same problem with http://lists.samba.org/archive/samba/2003-January/059073.html I use following. Hardware: Dell PowerEdge 2950 OS: Red Hat Enterprise Linux ES4 Update 4 Kernel: 2.6.9-55.0.2.ELsmp RPM packages are: samba-3.0.10-1.4E.12.2 samba-common-3.0.10-1.4E.12.2 samba-client-3.0.10-1.4E.12.2 pam_krb5-2.1.8-1 krb5-libs-1.3.4-49 krb5-workstation-1.3.4-49