Displaying 20 results from an estimated 6000 matches similar to: "Differences between newhidups (MGE tables) in 2.0.4 and svn trunk"
2007 Aug 11
1
[MGE EVOLUTION 850 VA/ ups 2.0.4] Output.voltage is at 0.0
Hello !
I've just a problem with upsd/upsmon 2.0.4, please have a look at the upsc command:
--------------------
battery.charge: 59
battery.charge.low: 5
battery.runtime: 1312
battery.voltage: 24.0
driver.name: newhidups
driver.parameter.port: auto
driver.version: 2.0.4
driver.version.data: MGE HID 0.9
driver.version.internal: 0.28
input.frequency: 0.0
input.transfer.boost.low: 184.0
2007 Mar 12
3
upsmon keeps broadcasting on battery / on power (driver is newhidups)
Hi,
I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB
port under Linux Red Hat 4 Upd 4.
I have compiled and installed the usb driver (make usb && make install-usb). I
followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the
/etc/udev/rules.d/025_nut-usbups.rules.
The ups is recognized by the kernel:
Mar 12 14:52:03 serveur1 kernel: usb
2007 Mar 12
3
upsmon keeps broadcasting on battery / on power (driver is newhidups)
Hi,
I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB
port under Linux Red Hat 4 Upd 4.
I have compiled and installed the usb driver (make usb && make install-usb). I
followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the
/etc/udev/rules.d/025_nut-usbups.rules.
The ups is recognized by the kernel:
Mar 12 14:52:03 serveur1 kernel: usb
2006 May 16
2
MGE Pulsar Extreme communication problems
Hi,
I am trying to talk to an MGE Pulsar Extreme UPS over RS232 with the
mge-shut driver but I'm having some problems.
It appears to init OK but I can't, say, turn the outlets off, eg..
harrow:~>upsc mge@localhost
battery.charge: 78
battery.charge.low: 20
battery.runtime: 05760
driver.name: mge-shut
driver.parameter.port: /dev/cuad1
driver.version: 2.0.3
driver.version.internal: 0.65
2007 Oct 29
1
Outlet switching on the MGE Pulsar 1500 using usbhid-ups on FreeBSD
I am running NUT 2.2.0 compiled from the FreeBSD ports tree.
[inchoate 14:50] ~ >upsc ups1 at localhost
battery.charge: 59
battery.charge.low: 20
battery.charge.restart: 0
battery.runtime: 6350
battery.type: PbAc
battery.voltage: 43.0
driver.name: usbhid-ups
driver.parameter.offdelay: 120
driver.parameter.ondelay: 13
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.version:
2008 Apr 01
1
Incorrect battery status on MGE Pulsar M 3000
Hello!
We have two upses: MGE Pulsar M 3000 and MGE Pulsar EXtreme 3200C. They
connect to server by USB. EXtreme works good with usbhid-ups (nut 2.2.1) and
newhidups (nut 2.0.5). But Pulsar M doesn't want to work with usbhid-ups.
- my ups.conf:
[extreme]
driver = usbhid-ups
port = auto
product = "EXtreme"
[pulsar]
driver = usbhid-ups
port =
2011 Oct 06
1
Differences between USB and serial on an MGE Pulsar Evolution 3000
Hi,
I've been using NUT for many years to look after the UPS on my home
servers. Originally I was using a Compaq R3000 but that was replaced
with an MGE Pulsar Evolution 3000 about a couple of years ago because
the Compaq one was just too noisy!
I'm just setting up a replacement server and would like to connect it
using a serial cable as I've found that the USB connection
2007 Feb 01
2
NUT-2.0.3 - problems on setting values
Hello,
we have a MGE Pulsar Evolution 800 connected to a Fedora Core5 Server
using a serial cable.
Installed and configured properly are RPM versions of
nut-2.0.3-0.1.fc5
nut-client-2.0.3-0.1.fc5
nut-cgi-2.0.3-0.1.fc5
which all work (mostly) fine.
The server is connected to outlet.0 and properly shuts down when it's
loosing power after around 20 minutes. It also boots up whenever the ups
2006 Jun 09
1
MGE ellipse 1200 config and documentation
Hi,
I have recently purchased MGE ellipse 1200 UPS for my home system. Obviously,
the choice of this particular brand was mainly dictated by MGE's
long-standing support for Linux and NUT project. The fact that the box was
clearly the prettiest looking one on the block did help also ;-). I have had
NUT tools installed and configured in no time, as I did it numerous times
before -- kudos
2006 May 11
0
MGE Pulsar Extreme communication problems
Hi,
I am trying to talk to an MGE Pulsar Extreme UPS over RS232 with the
mge-shut driver but I'm having some problems.
It appears to init OK but I can't, say, turn the outlets off, eg..
harrow:~>upsc mge@localhost
battery.charge: 78
battery.charge.low: 20
battery.runtime: 05760
driver.name: mge-shut
driver.parameter.port: /dev/cuad1
driver.version: 2.0.3
driver.version.internal: 0.65
2006 May 12
1
Various NUT issues/questions
Hi,
FINALLY got my UPS working, YEA!!!! But now it brings
up even more issues.. (BOOO!!)
1) I'm thinking this is a UPS issue, but when I pull the plug
on my UPS, it goes from 100 to 30 in just a short amount of
time (Minutes). This causes the machine to shut down. But once
it gets to 0, its beeped its little heart out for a few more
HOURS providing power to the non-system items perfectly.
2020 Sep 11
1
UPS recommendation for NUT and power-on-delay support
On Fri, Sep 11, 2020, at 4:05 PM, Bartosz wrote:
> Dear All,
>
> Could you please recommend me a UPS with 100% support of the ondelay parameter and NUT compatibility?
>
> 850 or 1000 VA
>
> I have the EATON 5E850iUSBDIN UPS and it does not support this parameter so I would like to buy another UPS that for sure will support it.
>
> Thank you,
> Bart
Can you tell
2006 May 20
0
Re: Centos/RHEL with MGE UPS Protection Centers (usb)
OPENSOURCE wrote:
>
> I hope this answer your questions, and I hope you're ready to wait a bit
> more.
>
Sure, NP for me, thanks for the feedback Arnaud.
I have to admit that past days im having the syslog with a lil more activity
from the new usb attached unit (ellipse ASR 1000 VA)
Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2-pre2)
Detected an UPS: MGE UPS
2006 Feb 25
0
Re: Bug#354305: nut-usb: newhidups: *** glibc detected *** double free or corruption (fasttop): 0x08068268 ***
Hi Kiko,
2006/2/25, Kiko Piris <menorqui@pirispons.net>:
> Package: nut-usb
> Version: 2.0.3-1
> Severity: important
>
>
> When newhidups loses comunication with ups (G), it dies when trying to
> reconnect with the error:
>
> *** glibc detected *** double free or corruption (fasttop): 0x08068268 ***
>
> Following is a copy&paste of the last lines of
2013 Sep 10
1
[HCL] Eaton 5S1500LCD supported by usbhid-ups
Device Manufacturer: Eaton
Device Name: 5S1500LCD
----------------------------------------------------------
upsc output:
battery.charge: 100
battery.charge.low: 20
battery.runtime: 3515
battery.type: PbAc
device.mfr: EATON
device.model: Ellipse PRO 1500
device.serial: 0000000000
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
2013 Sep 10
1
[HCL] Eaton 5S1500LCD supported by usbhid-ups
Device Manufacturer: Eaton
Device Name: 5S1500LCD
----------------------------------------------------------
upsc output:
battery.charge: 100
battery.charge.low: 20
battery.runtime: 3515
battery.type: PbAc
device.mfr: EATON
device.model: Ellipse PRO 1500
device.serial: 0000000000
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
2012 Jun 26
1
NUT MGE Pulsar Ellipse Premium 800: Changed NUT rw variables?
Hello all,
I've got an MGE Pulsar Ellipse Premium 800 powering a couple of FreeBSD
systems. Driver used is mge-shut, I don't know what the new mge-shut
driver offers, but I follow the "if it works, don't fix it" dogma here. :)
I also had a nut server installed on the master, with the
/usr/local/etc/rc.d/nut script slightly modified to include a couple of
upsrw commands
2008 Dec 06
1
MGE Evolution and programmable outlets configuration
Hi,
I'm a MGE Evolution 650 owner and, after putting in place a basic
configuration for controlling my UPS, I'm going to tune a little bit
better NUT for my needs.
First of all let me describe my little (SOHO) scenario: I have the ISP
modem/switch (providing VoIP too, so it's important to keep it running
as much as possible), a small low power home server and a much hungrier
PC.
2005 Aug 30
0
mge-shut doesn't use lowbatt parameter
Hello nuters,
FreeBSD, Ellipse USBS 800, serial line, nut 2.02 everything works fine.
But I'm only able to get an automatic shutdown when reaching the
built-in 30% level. I the "lowbatt parameter" is set to anything,
it's simply ignored.
This is a problem as I want to shutdown around 90% to avoid the
battery to drain out when multiple shutdowns occur.
Any idea ?
2014 May 26
2
Resetting replace battery status on Pulsar 1500
Hi,
I have a FreeBSD 9.2 system with NUT 2.6.5 (installed via the ports tree) with an MGE Pulsar 1500 connected. A while ago it complained it needed the battery replaced and it was finally replaced last week, however I can't find out how to reset the flag in NUT.
I've looked in upsc, upsrw and upscmd but none seem to have a suitable option.
The UPS is connected via RS232 and upsc output