similar to: Using upssched under Solaris

On Fri, 9 Jun 2017, Robbie van der Walle wrote: > ... and also still open is the notification on the Mac. If notify-send is available on the Mac, then perhaps this will work: In upsmon.conf on the Mac you need NOTIFYCMD /usr/sbin/upssched (or wherever this goes on a Mac) NOTIFYFLAG ONBATT SYSLOG+EXEC In upssched.conf you need CMDSCRIPT /usr/sbin/upssched-cmd (or wherever this

Ah! So I can detect the source UPS in the upssched.conf and pass it as a distinct event to the shell script. That sounds like an excellent approach. Thanks! GMH From: O'Shaughnessy, Mike [mailto:Mike.OShaughnessy at gd-ms.com] Sent: Tuesday, October 31, 2017 12:46 PM To: Garrett Michael Hayes <Garrett at VerbalImaging.com>; nut-upsuser at lists.alioth.debian.org Subject: RE: Email

Hi, I have problem with upssched on windows. Upssched is not executed. I have 2 scripts, 1 for notification in upsmon and second for scheduling in upssched. Monitoring is working fine, script write to log. I'm using binary windows installer 2.6.5-6 from NUT. Here are my configs: --- nut.conf MODE=netclient --- upsmon.conf MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave

Ok, I am running NUT in dummy mode. I have added a new ups in ups.conf [dummy] driver = dummy-ups port = upsc.dev desc = "dummy ups for testing purposes" upsc.dev has been generated by exporting the Elit configuration. I have added the monitor line in upsmon.conf and the "exec" flags (all the events) MONITOR dummy at artu 1 user pass master SHUTDOWNCMD

Greetings Gentlebeings, I have started deploying a number of NUT instances on Raspberry Pi machines (Raspbian Jessie) across my network. The purpose of these "nutcases" as we refer to them is to monitor the status of the UPSs supporting our network switching infrastructure and notify us of power and battery events via email. No shutdown or other actions are required. Everything is

I have only RS-232 on the box (meanwhile, it was manufactured on march of 2011) Here is my configs: nut.conf: * * MODE = netserver ups.conf: * * [KIN1500] driver = powercom port = notUsed desc = "Powercom KING PRO KIN-1500AP RM" upsd.conf: * * LISTEN 192.168.1.2 3493 upsd.users: * * [monuser] password = xxxxxxxx upsmon master

Hi everyone, new to the list but a long time nut user. I've tried a couple of times to set up a timer to avoid getting annoying messages when the system goes on battery for only a few seconds. in uppsched.conf I added this at the bottom: AT ONBATT * START-TIMER onbattwarn 60 AT ONLINE * CANCEL-TIMER onbattwarn What am I missing? it still doesn't wait before alerting me.

An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120104/34be491b/attachment.html>

Hello All, I'm trying to establish a MASTER SLAVE configuration of UPS using NUT Driver. I'm able to shutdown the master after UPS is on BATTERY ( POWER BLACKOUT) .However I'm trying to shutdown the other SLAVE MACHINES BEFORE MASTER. But at the remote side ( Slaves ) shutdown after UPS blackout does not happen. My configuration in Master are /usr/etc/upsd.users

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

Bonjour je n?arrive pas ? configurer convenablement NUT pour qu?il m?adresse des SMS en cas de coupure de courant. C?est important pour moi car dans ma maison les coupures sont tr?s fr?quentes. Voici ma configuration : ****************************************************************** 1/ dans /etc/nut/upsmon.conf MONITOR eaton at localhost 1 admin motdepasse master MINSUPPLIES 1 SHUTDOWNCMD

Hi! Some systems I have take some time to shut down, so I would like them to shut down if the UPS have been on battery for 2 minutes. Internet has told me that SHUTDOWNCMD ?/sbin/shutdown -h +0? in /etc/nut/upsmon.conf will execute when the UPS is both OB (on battery) and LB (Low battery). Like in wiki.ipfire.org - Detailed NUT Configuration<https://wiki.ipfire.org/addons/nut/detailed>

Well it is the season for storms and power outages here in the US PNW. I noticed that today when the power went out, NUT mostly did what I hoped/wanted. But it did not actually turn off the UPS at all. The UPS kept beeping and I had to turn it off manually. I thought that NUT would handle this. But perhaps it cannot for my unit? Or perhaps I have things improperly configured? Any suggestions?

Hi, I'm having problems to configure upssched in order to notify me only when the disconnection exceeds the 30 seconds. Now, I'm getting a mail if it is disconnected just for a second, or even worse, when I got low tension. So, mail notifications are well configured, I guess... I think the problem is in upssched. I'm new to this, so it could be a stupid thing that I'm missing...

ok, this function really worked? i have a linux Fedora 20 system, i install from rpm in version 2.6.2 and i this function not execute. Then i delete the rpm packet and all configuration files and compile latest stable 2.7.2 version with usb driver. ok, i first load ups driver: * /usr/local/ups/sbin/upsdrvctl -u root start* next i started */usr/local/ups/sbin/upsd* and next*

Hello Is it possible to limit the frequency of specific notifications? In 2.7.4 it seems to be possible only for REPLBATT via RBWARNTIME, but that's it. My specific problem is that the UPS got disconnected and before I got hold of the server to turn the upsmon off my mailbox got flooded with hundreds of messages. It probably doesn't make sense for all notification types, but for

Group: The Background: I maintain the network hardware for a county government building that is un- occupied except for weekday dayshift. The building is located in an older section of town and the electric service has components that are nearing their 100 year lifetime. The building has UPS for all computer and network hardware and an autostart generator that starts when utilitity service

Hello NUT Team! I am testing the early shutdowns in NUT 2.6.5-1 package for Windows (Windows 7 x64). My configuration files: upsmon.conf RUN_AS_USER upsmon MONITOR upsa at 192.168.10.200 1 upsmon pass master MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD "upssched.exe" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG