similar to: RE nut 2.0 fentonups and Xanto S3000R

Hi ups-devel, As I looked throw www.networkupstools.org site, haven't found any pointers where to send patches, so I hope this is the right place. (Please let me know weather this is the right place.) The patch contains a minor change in the logic of the driver, our Effekta MHD 3000 UPS continuously writes status data to the serial port, so one has to send a CR character and empty the

Hi, I am working on a patch for FENTON.H to support some more ups models, I wonder if someone can help with further information,meaning and importance for the following values that are beeing set in the model capability table: float lowvolt; float voltrange; float chrglow; float chrgrange; int lowxfer; int lownorm; int highnorm; int highxfer; Thanks, Nadav

Dear Andreas, some googling revealed, you created a driver for the xanto series of online-usv.de. In what state it is currently? I've to manage a S2000 and would like to use nut for it, is it usable by now? Do you need another tester? TIA, Pete

Hello everybody, this is my first post to this list - normally I take some time to read some messages first to get an impression of the List, but I have a pressing question to ask, so please forgive me if I miss the right tone... I just installed NUT 2.0.2 and try to get it working with our Effekta MT 1500. In the Drievers List I found this entry: "Effekta" "MI/MT/MH"

good new first: the megatec driverin 2.0.5 now works with the Online Xanto S3000R here - well, for the very basics. the UPS has NO way ofidentifying itself. It also does not respond to the power ratings query ("F"). I previously used a hacked up fentonups driver. This means the driver cannot figure out the battery voltage and thus no battery charge level, which is a problem in our

On 1/23/07, Henning Brauer <hb-nut@bsws.de> wrote: > good new first: the megatec driverin 2.0.5 now works with the Online > Xanto S3000R here - well, for the very basics. > > the UPS has NO way ofidentifying itself. It also does not respond to > the power ratings query ("F"). I previously used a hacked up fentonups > driver. This means the driver cannot figure out

Hello there. I use Online Xanto ups'es so I did some googling for their support in nut. Turns out that... - networkupstools.org talks about an 'optiups' driver in the development version (http://www.networkupstools.org/compat/dev.html - by the way, the web page says 'stable' in the title and headings just like the actual stable one) - Andreas Thienemann seems to have a

Hi list here is the patch to make fentonups recognize some PowerCOM's UPS's, and to setup terminal lines for them (at least for SMK-1500a) as powercom's original upsmon do. fentonups -x powercom works correctly with SMK-1500a (it screamed ''Communications with UPS lost - check cabling' or 'Short read during UPS id sequence' without this patch). Sorry for

Good morning, i have an Xanto S1000 USV the Manufactor is ONLINE USV-Systeme AG. I tried all the buildin drivers, also the driver for the driver for the Generic UPS, nothing worked for this UPS so now my question has anyone else this UPS and functional driver? Thanks and Greets Dennis

please keep the list cc'ed when replying me. ---------- Forwarded message ---------- From: Andreas Thienemann <andreas@bawue.net> Date: 15 nov. 2005 15:36 Subject: Re: RE New xanto driver for NUT To: Arnaud Quette <aquette.dev@gmail.com> Hello Arnaud, On Tue, 15 Nov 2005, Arnaud Quette wrote: > is there really a need to separate it from the megatec. > we're currently

please keep the list cc'ed when replying me. ---------- Forwarded message ---------- From: Andreas Thienemann <andreas@bawue.net> Date: 15 nov. 2005 15:36 Subject: Re: RE New xanto driver for NUT To: Arnaud Quette <aquette.dev@gmail.com> Hello Arnaud, On Tue, 15 Nov 2005, Arnaud Quette wrote: > is there really a need to separate it from the megatec. > we're currently

Hi Alexander, How to megatec driver communication windows c++.NET or C#.net. Thanks. Yi?it YALNIZ?A -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20141023/2384ce84/attachment.html>

Citeren Arnaud Quette <aquette op alioth.debian.org>: > Log: > Trim extraneous end-of-line, in buggy HID string tables, which > results in upsc breaking the communication pipe (Ubuntu bug #753661) We have 'rtrim' to do this: - return buf; + return rtrim(buf, '\n'); Best regards, Arjen -- Please keep list traffic on the list (off-list replies will be rejected)

Best fortress support was understandably dropped, but we still use them, and someone else may want the driver I ported to nut-2.0. We also often attach the serial cable from a UPS to a network terminal server, since servers these days don't come with very many serial ports. (They call them "legacy" ports.) I submitted a patch to support these for nut-1.x, and it was rejected

Hi list: I''m a young developer that need a little help with scriptaculous "Autocompleter". I work with PRADO framework (http://www.xisc.com) and PHP as a script language. Now this is a little function in JavaScript for make a AJAX call and show the results without reload the entire page. See below: 1 function makeRequest(url,element) { 2 var http_request = false; 3 if

> here the output of "upsd -DDDDD" when starting "upsc apc@localhost > ups.status" (and stopping after 20-30 sec with an ctrl+c) Ah, you have a problem with 'upsc' rather than with 'upscmd' like you stated before. That changes things. > Connection from 127.0.0.1 > acl_check: localhost: match 1 > ACL [localhost] matches, action=1 > write:

On 2016-01-28 8:18 AM, Charles Lepple wrote: > I definitely like your approach. Thanks for moving some of the "magic numbers" to named constants, as well. Thanks. Always nice to have real coders sanity check anything I've written with a "thumbs up" response. (I'm more a hardware guy) And sscanf was working like poo -- so I figured I'd parse it differently with

RSQLite.extfuns provides SQLite extension functions for use with RSQLite. The package is a wrapper of extension functions written by Liam Healy and made available through the SQLite website (http://www.sqlite.org/contrib). You can make the extension functions available on a per db connection basis like this: library("RSQLite.extfuns") db <- dbConnect(SQLite(), dbname =

RSQLite.extfuns provides SQLite extension functions for use with RSQLite. The package is a wrapper of extension functions written by Liam Healy and made available through the SQLite website (http://www.sqlite.org/contrib). You can make the extension functions available on a per db connection basis like this: library("RSQLite.extfuns") db <- dbConnect(SQLite(), dbname =

hi i had created an indexer n searcher in php in 0.9.4 and it was workin fine. now i installed 0.9.5 but i m getting following error *Fatal error*: No matching function for overloaded 'Document_add_posting' in */home/jana/public_html/final_file_search/file_indexer.php* on line *48 *this is the fragment of my code where i m gettin the error.