similar to: Common Power Management with UPS support (was: NUT-NG)

Hi Powermen ;-) I recently came across the Powerman project (http://sourceforge.net/projects/powerman/), pointed by Tony Merenda, from Opengear (thanks Tony). Congrats for your work in this area! I've thought a bit about Powerman and NUT since then... NUT currently supports hosts of UPSs and few PDUs (RPCs), and provides tons of features: http://test.networkupstools.org

Hi fellows, I'm really pleased to announce that a first stage of NUT and HAL [1] integration has been reached: NUT drivers (in fact, only newhidups, tripplite_usb and bcmxcp_usb for the moment) can feed HAL data. It's a "quick and dirty" hack, as a proof of concept, and there is still lots of things to be done, both on NUT and HAL sides. But it's a good base, and very

Dear NUT users and developers, Like the other years, before taking a small rest, here are some news related to NUT. * First, you should have seen the 2.0.5-pre1 release announcement. I don't think 2.0.5 is very far, but I realized that I've made an archive including the .svn directory (bad, bad me. I should know that release are made against exported svn, not checked out!) * Next,

Dear NUT users and developers, Like the other years, before taking a small rest, here are some news related to NUT. * First, you should have seen the 2.0.5-pre1 release announcement. I don't think 2.0.5 is very far, but I realized that I've made an archive including the .svn directory (bad, bad me. I should know that release are made against exported svn, not checked out!) * Next,

On Feb 11, 2008 5:30 PM, Marcio Gomes <mpg at microlink.com.br> wrote: > I change the if in [OFF] detect state to, in original way, if you send a > reset.watchdog, the UPS goes > to OFF state in clients, but it is not correct, because UPS is OL and > Shutdown are in progress, but > the power is not OFF First of all, thanks for the patch. But I have a few comments: Are you

THE GOOD: NUT is able to communicate with my Powerware 5115A over USB using the bcmxcp_usb driver: ambient.temperature: 38 battery.charge: 99 battery.runtime: 9000 battery.voltage: 27.07 driver.name: bcmxcp_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.2.1 driver.version.internal: 0.13 input.frequency: 50.34 input.voltage: 235 output.current: 0.0

2009/1/22 Spiros Ioannou <sivann at gmail.com> > Cher Arnaud, > Hi Spiros, > I send you a demo that reads info from an Emerson Liebert > GXT2-10000T230 through the RS-232 port. This uses the "ESP-II (ESP 2) > Protocol". > Current supported data includes: measurements (voltage, temperature, > etc) , ID strings (serial number, etc), status flags (inverter on,

some notes: - for this kind of discussion, please cc upsdev list (I've added it), - I've fwded the full thread to upsdev, - this subject is part of what I call NUT-NG (next gen.), aka nut 3.0... - I'll study in depth the thread this week end, and complete with my thoughts, - thanks to Stan to have put us all in touch Arnaud 2006/3/10, Stanislav Brabec <sbrabec@suse.cz>: >

Hi all! I've been (very) out of the loop for a while, up to the point that I had completely missed that the mailing list has moved. Oh well. However, Kjell Claesson poked at me regarding the 3phase stuff, so I found out that I had missed the recent events. In any case, it seems that the situation is unchanged regarding 3phase support. As some of you remember I made a suggestion for a

I have an FC5 system with a powerware 5110 usb ups. The system seems to find the UPS ------------------------------ [root@b1 src]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0592:0002 Powerware Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 ------------------------------- [root@b1

2011/5/31 Arnaud Quette <aquette at alioth.debian.org> > Author: aquette > Date: Tue May 31 09:00:57 2011 > New Revision: 3010 > URL: http://trac.networkupstools.org/projects/nut/changeset/3010 > > Log: > Update Subversion access information, following Alioth update > > Modified: > trunk/docs/download.txt > > Modified: trunk/docs/download.txt > >

side note on this commit... 2011/5/31 Arnaud Quette <aquette at alioth.debian.org> > Author: aquette > Date: Tue May 31 09:00:57 2011 > New Revision: 3010 > URL: http://trac.networkupstools.org/projects/nut/changeset/3010 > > Log: > Update Subversion access information, following Alioth update > > Modified: > trunk/docs/download.txt > > Modified:

Hi All I'm trying to get my Ultra UPS connected. It connects using a standard USB cable I have --with-drivers=hidups in the configure command and I have lsusb showing Bus 001 Device 002: ID 0d9f:0001 Powercom Co., Ltd Bus 001 Device 001: ID 0000:0000 I have /dev/usb/hiddev0 now matter what I try I keep getting upsdrvctl start Network UPS Tools - UPS driver controller 2.0.3 Can't

Hello, I'm seeing some messages from dovecot in my logs such as: May 8 11:43:41 snowdrift dovecot: IMAP(username): Disconnected: BUG: Unknown internal error I did some searching, and discovered a similar report last month, to which there was a request for more information that didn't seem to get followed up, so I have collected this information too. Dovecot version: 1.0.10 (from Ubuntu

2012/2/6 thomas schorpp <thomas.schorpp at googlemail.com>: > Hi, Hi Thomas, > I want the driver report the battery status from ABM charging controllers > -patch attached- : thanks for your patch. since it introduces a new variable (battery.status.abm), I prefer to step back and think to something useful more widely. thus, I'm thinking about a generic

Hi all! I propose to replace the variables output.voltage.target.line and output.voltage.target.battery with the variable output.voltage.nominal. The reasons for doing it: * Unify naming, the term "nominal" is used both in NUT and by UPS makers for this. * Very few devices (none that I have seen) have a nominal output voltage that differs when on battery/mains. * A single

The attached patch is a first stab at adding 3phase support to upsstats/upsimage. I got a little carried away, so bare with me. This patch adds 3phase awareness to upsstats/upsimage and the template files, and in additional to the obvious 3phase variables: - upsstats: * Adds IF/ELSE-awareness, and since the parser logic is rather limited this means that we now have IF, ELSE IF etc since all

Hi, just wanted to confirm that Fiskars UPS 9000 series (aka Powerware Plus 500 series) with optional UPS Information Unit works fine with upscode2 driver. Tested on Fiskars 9200 (20kVA/400V/3ph). Regards, -- Sebastian Zagrodzki Dzia? Sieciowy ICM, Uniwersytet Warszawski s.zagrodzki at net.icm.edu.pl (+48-22) 5520527, 8268009, fax. 8284195 http://www.net.icm.edu.pl/

Hi all! The following files emits warnings when compiled with gcc 4.0: al175.c bcmxcp_ser.c belkinunv.c cyberpower.c everups.c powercom.c solis.c All warnings seem to be of this variety: everups.c:38: warning: pointer targets in passing argument 2 of 'ser_get_char' differ in signedness I suggest that those who fiddles with those drivers fixes the warnings and verifies that it works

I have heard rumors to the affect that there will be a sparc release of lustre incorporating zfs. If this is true does anyone know how I can get a copy, beta test, or sign up for the effort.