similar to: APC Back-UPS 500

Hey guys and gals, Just got nut up and running (finally..) now every time I monitor my UPS and the UPS shuts down it also shuts my machine down. What script do I have to write for this to NOT happen? Thanks guys, Connor -------------- next part -------------- An HTML attachment was scrubbed... URL:

I tested your fix (newhidups -DDD /dev/null) using both and APC Back-UPS 350 an APC Smart-UPS RT 2000 XL. No more segmentation fault due to the fixed-size array. ~Jacob -----Original Message----- From: nut-upsdev-bounces@lists.alioth.debian.org [mailto:nut-upsdev-bounces@lists.alioth.debian.org] On Behalf Of Peter Selinger Sent: Monday, October 16, 2006 12:12 PM To: Schmier, Jacob Cc: NUT

Hello. So as my english is not so good, i'll try to write my story in bash commands :o) miwa@zork3$ uname -mrs FreeBSD 5.5-STABLE i386 miwa@zork3$ su root@zork3# cd /usr/ports/sysutils/nat root@zork3# make && make install root@zork3# cd ../nut-usb root@zork3# make && make install root@zork3# cd /usr/local/etc/nut root@zork3# cat ups.conf user=root [MGE-Ellipse]

This took a long time because I had problems with my system. After I reloaded my operating system several times I found I had a bad memory module. Here is the output from newhidups for my Geek Squad GS1285U. It just kept repeating until I hit ctl-z. I think that this means nut will work for this ups. My computer is not powered by the ups yet. I did not want it to be powered down by accident.

I am having an issue running NUT and using an TrippLite OMNI900LCD. When I run ./upsdrvctl start I get : [player@V0002-S002 bin]$./upsdrvctl start Network UPS Tools - UPS driver controller 2.1.0 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0) Detected a UPS: Tripp Lite /TRIPP LITE UPS Using subdriver: TrippLite HID 0.1 (experimental) dstate_setflags: base variable

Arnaud, > first, even if your battery is full, and your ups is online, there is a > small amount of power drawn. So having always is CHRG status is normal. > In fact, these complementary status are more interesting for higher end > UPSs. > > second, these status need not to be handled like LB, as each one clears the > other. While LB had no pending event (!LB) before... >

*********************** Your mail has been scanned by InterScan MSS. *********************** Has anyone managed to get this UPS to work? I am using the laster development nuts. My /proc/bus/usb/devices content: ==== cut ==== T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=ffff ProdID=0000 Rev= 1.00 S:

Hello, I'm using the stable amd64 port of Debian Linux. I installed (the latest) nut-2.0.1-4 and nut-usb packages for utilizing an APC Smart-UPS 1500 USB. I tried "apcupsd" first but "nut" makes an even more sophisticated impression on me and has more security options. I had problems with the newhidups driver. It didn't find a device with matching VendorID. And

Hi, I think my problem will be easy to resolve ... I don't understand why the ups return the value 2.000000 for all variables ... I've been looking for 1 hour on google and I can't find similar problem. Thank you David goburge ~ # /lib64/nut/newhidups -D /dev/ttyS0 Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) debug level is '1' Detected a

Gentlemen, Please note that what follows pre-dates the latest changes from Arnaud (just thought someone might want to look at these before I can test the latest!). When running newhidups with -D -D -D I saw messages that looked like errors, and it took me a while to understand that they were not really errors. I therefore added two new entries in apc-hid.h, and I modified a couple of diagnistic

Gentlemen, I have now had a chance to run some initial tests of my changes to apc-hid.c of the current development tree. Running newhipups and inspecting the -DDDD output seems to indicate that with the fix below everything seems to work as expected. However, I have not yet shut my system in order to take the UPS out of action so that I can do my various tests with a lightbulb load. I still hope

I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD

I'm using an APC Back-UPS XS with nut 2.0.3. I've recompiled/reinstalled the source, and switched over to the newhidups driver (instead of the old hidups driver). I modified by ups.conf to use newhidups. The hotplug files were not automatically installed, I had to copy those from the scripts directory to my hotplug/usb directory. The newhidups driver loads find and then works for a

Hi Patrick, Patrick Nolan wrote: > > Remember me? Back in May we exchanged some messages about my Tripp-Lite > UPS. My boss has gone on vacation, so I finally got a chance to take a > look at this. > > Peter Selinger wrote: > ... > > In case you feel like experimenting with this, I am attaching a patch > > that *might* enable this device to be supported by the

Hi I am running FC5 with nut coming from the fc5 extras repositories. I am trying to configure a Gamatronic D-Compact ups. The cable that came with the ups has a serial connector on one end and a usb on the other. cat /proc/bus/usb/devices produces T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P:

Hello everyone! If this message was posted twice, my apologies. I'm having issues with my webmail today... I am using the testing version of NUT from SVN at changeset 582. I have successfully created a stub for newhidups driver for my Dynex DX-800U UPS, but I am completely lost on the customization of it. I've followed the hid-subdrivers.txt instructions and I understand I need to

Hi everybody, If we let the feature running, it appears that the driver gets unbound after a while ( variable from quarter of hour to 6 hours ) and cannot reconnect. This behavior appear with both MGE Ellipse ASR and non-ASR models with connection to an UHCI and OHCI controllers. The USB core is from 2.4.28 kernel. We use nut-2.0.3. Start, powerfail and recovery detections, UPS shutdown work

Hello Charles! As promised, I just checked out the CVS and recompiled everything. In the attached .txt is what is coming out from my UPS. I am wondering about all those zeroes. Also, this morning I plan to connect the UPS to a Win box running the monitoring program supplied with the UPS (UPSilon2000) and a USB sniffer program. If you have any suggestions on what to look for in the data,

Hello all, About a month ago Peter and Charles were kind enough to try to help me with getting a Tripp Lite USB UPS to work with NUT. I reported quite a bit of initial success, and then other things here fell apart. Between work, fence building and a week-long out of town business trip, I have had to drop this from my list of things to do lately. I am back at it, and I believe I will have

Gentlemen, I think this question is mainly for Arnaud again: When I run my UPS directly with newhidups -D -D -D, with no data changes, and I then observe the interaction with my UPS (still Back-UPS ES 650 FW:818.w1.D USB FW:w1), I see the updateinfo cycle through 3 different forms: (1) a (2 bytes) => 06 08 notification that provides one item: UPS.PowerSummary.APCStatusFlag Note that