similar to: Fwd: Auto-discard notification

don't know why, but Carlos' message has been auto discarded! as a side note, iirc, the line in the file is mentioned. So it's easier than searching and removing. though I agree that Carlos' mentioned solution is cleaner. -- Arnaud 8<------------------------------------------------------------------------------------------------ From: "Carlos Rodrigues"

Hi Everyone, I'm having trouble getting TrippLite SMX1500LCDT to work on FreeBSD 11.2, nut 2.7.4 installed from FreeBSD port. The debug output is rather big when I'm starting usbhid-ups initially, Please find that attached (gzipped to comply with message size limit). Subsequently, until I unplug and replug the USB cable, I'm geting a shorter debug output, like this: Network UPS

---------- Forwarded Message ---------- Subject: [PATCH] New to nut project Date: Friday, 6. November 2009 From: Patrick Levesque <patrickl at verint.com> To: Thomas Jarosch <thomas.jarosch at intra2net.com> As requested, here is my patch file including all my modification to the 2.4.1 tarball from the web site. On Friday 06 November 2009 05:41:29 you wrote: > Hello Patrick,

Hi Raphael, btw, are you 2 bugs today a simple coincidence with my linkedIn invitation yesterday? ;-) 2008/10/4 Raphael Geissert <atomo64 at gmail.com>: > Package: nut > Version: 2.2.2-8 > Severity: wishlist > Tags: patch > > Attached is a patch adding "support" for tripplite's avr750u UPS. > Issues: > * productid still needs to be specified in

Citeren Arnaud Quette <aquette op alioth.debian.org>: > Modified: trunk/drivers/tripplite-hid.c > ============================================================================== > --- trunk/drivers/tripplite-hid.c (original) > +++ trunk/drivers/tripplite-hid.c Sun Mar 1 19:56:31 2009 > @@ -84,6 +84,8 @@ > > /* HP R/T 2200 INTL (like SMART2200RMXL2U) */ > {

Thanks for your support, Jim. I found a workaround: logread showed some access-denied errors, and because I don't know exactly what it may be (except the lack of udev rules perhaps), I ran upsd as root and it connected with the UPS. Therefore I wonder whether a more elegant solution could be used for this part? But there are several things about the readings with the 2.7.4 usbhid-ups driver

2015-05-29 14:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Fri, 2015-05-29 at 13:59 +0200, Arnaud Quette wrote: > > Hi Richard and the list, > > > > you'll find attached a patch for 95-upower-hid.rules, which adds: > > - the "usbmisc" filtering, as added in your repo, > > - more comments, including one that points at your UPower

Hey 2015-04-09 1:46 GMT+02:00 Charles Lepple <clepple at gmail.com>: > On Apr 8, 2015, at 2:04 PM, Eric Cobb <Eric_Cobb at tripplite.com> wrote: > > Charles and list, > > If I leave the driver alone it does not eventually start. It continues to > report that it is unable to connect. I have to perform a upsdrvctl stop ; > upsdrvctl start (I actually just perform

Network UPS Tools version 2.7.1 has been released: http://www.networkupstools.org/ This release is an interim release, part of the testing series, and the first release after the transition from Subversion to Git. The last release (2.6.5) is almost a year old. A lot of work has been done, but a good amount remains to achieve 2.8.0 goals. Direct access: - Download:

Sorry, I just now figured out how to get a usable output. -Option one doesn't work at all for me. snmp_build: unknown failuresnmpget: Error building ASN.1 representation (Can't build OID for variable) COUNT = 0 / 0 Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h Creating /usr/share/snmp/mibs/ups-mib.txt-mib.c Done. -Option 2 is attached. I ran the following to get the output. snmpwalk

2014-02-26 1:45 GMT+01:00 Jason R Begley <jayray at digitalgoat.com>: > Sorry, I just now figured out how to get a usable output. > -Option one doesn't work at all for me. > > snmp_build: unknown failuresnmpget: Error building ASN.1 representation > (Can't build OID for variable) > COUNT = 0 / 0 > Creating /usr/share/snmp/mibs/ups-mib.txt-mib.h > Creating

Device manufacturer and name: Tripp-Lite OmniSmart500 upsc output: matt at backup:/etc$ sudo upsc tripplite battery.charge: 100 battery.test.status: Battery OK battery.voltage: 14.56 battery.voltage.nominal: 12 device.mfr: Tripp Lite device.model: OMNISMART500 device.type: ups driver.name: tripplite_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3

Hi Richard and the list, you'll find attached a patch for 95-upower-hid.rules, which adds: - the "usbmisc" filtering, as added in your repo, - more comments, including one that points at your UPower repo, - 3 new manufacturers (Minibox, iDowell and Powerware) - a bunch of new devices (7 HP, 1 APC, 1 TrippLite, 2 PowerCOM and 2 Liebert) cheers, Arnaud -- Eaton Data Center

2015-06-04 13:04 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Sat, 2015-05-30 at 18:51 +0200, Arnaud Quette wrote: > > > > > > 2015-05-29 14:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > > > On Fri, 2015-05-29 at 13:59 +0200, Arnaud Quette wrote: > > > > Hi Richard and the list, > > > > > > > >

Hi, I own a UPS HP T750. Is there a driver for this UPS (either serial or USB)? thx kp

I think 3024 was added after NUT 2.7.4 release. On Thu, May 4, 2023, 18:20 Feliciano Chavez via Nut-upsuser < nut-upsuser at alioth-lists.debian.net> wrote: > Dears, > > I'm trying to connect this new version of the AVR700U to nut - 2.7.4-27 > running over OpenWrt 22.03.5, installed from the stable release > repositories, for an ath79 USB2.0 gigabit WiFi router. >

I installed NUT version 2.6.3-1ubuntu1.1 w/the client and server and the nut monitor. When I open the monitor, I get an error: error connecting to 'local host' ([Errno] connection refused). What can I do to get NUT to work? I can not tell if the NUT program is working or not. I'm running Ubuntu 12.04 32 bit Installed NUT from the Synaptic Package Manager. My computer is a Systemax

That worked out just fine. What I am currently running into are conditions where I am getting the following error that I figured I would share. Error: libusb_get_interrupt() returned 0 instead of 8 while sending 3a 4d b2 0d 00 00 00 00 '.M......' Conditions: upsdrvctl start via Init Script at Boottime. If I run the init script after boot, I do not receive this error. Eric Cobb ekcobb

I'm mostly not online for a few more days, so can't check directly. The general answers to the two questions would be: 1) checking if it is there: * revise if it is mentioned in the NEWS file (in sources - release tarball or on github); * check issues on github; * search/grep for 3024 in current/release-tagged codebase... 2) getting it to your system: versioning looks debianish, some

Greetings all, Anyone have a clue on this behavior (see below) on this behavior with FreeNAS-8.3.0-RELEASE-x64 (r12701M) on a TrippLite 1500LCD UPS? NUT version is 2.6.5 Using the following profile: Tripp-Lite ups 2 Smart1500LCD USB (usbhid-ups) I get the following: Dec 10 21:40:12 nas6 kernel: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.02, addr 2> on usbus1 Dec 10 21:40:12