similar to: Fwd: RE New xanto driver for NUT

Hello there. I use Online Xanto ups'es so I did some googling for their support in nut. Turns out that... - networkupstools.org talks about an 'optiups' driver in the development version (http://www.networkupstools.org/compat/dev.html - by the way, the web page says 'stable' in the title and headings just like the actual stable one) - Andreas Thienemann seems to have a

Hi Henning, you should get in touch with Carlos, who his developing a generic megatec driver (available from svn: http://eu1.networkupstools.org/source.html) Arnaud -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://people.debian.org/~aquette/ OpenSource Developer -

On 1/23/07, Henning Brauer <hb-nut@bsws.de> wrote: > good new first: the megatec driverin 2.0.5 now works with the Online > Xanto S3000R here - well, for the very basics. > > the UPS has NO way ofidentifying itself. It also does not respond to > the power ratings query ("F"). I previously used a hacked up fentonups > driver. This means the driver cannot figure out

good new first: the megatec driverin 2.0.5 now works with the Online Xanto S3000R here - well, for the very basics. the UPS has NO way ofidentifying itself. It also does not respond to the power ratings query ("F"). I previously used a hacked up fentonups driver. This means the driver cannot figure out the battery voltage and thus no battery charge level, which is a problem in our

Hi Alexander, How to megatec driver communication windows c++.NET or C#.net. Thanks. Yi?it YALNIZ?A -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20141023/2384ce84/attachment.html>

Good morning, i have an Xanto S1000 USV the Manufactor is ONLINE USV-Systeme AG. I tried all the buildin drivers, also the driver for the driver for the Generic UPS, nothing worked for this UPS so now my question has anyone else this UPS and functional driver? Thanks and Greets Dennis

Hello, i've a problem, this is my configuration: - Atlantis Land UPS with serial port - a generic RS232 to USB cable adapter (QinHeng Electronics HL-340 USB-Serial adapter for linux). The problem is in the syslog file where i find: [...] Aug 19 09:07:25 ProLiant megatec[1126]: Communications with UPS lost: No status from UPS. Aug 19 09:07:26 ProLiant megatec[1126]: Communications with UPS

Hello, I have a Yunto e a Zanto ups connected with usb with id 06da:0002 and 06da:0601. I have seen that people had some success using megatec driver. But now megatec is replaced by blazer-usb and I am not able to use my upses under nut. Can you help me? Thanks! Mario

Arnaud Quette wrote: > Anyhow, I would more see this as a merge of all these drivers, with > some autodetection or flag/param to switch the mfr/model and maybe > capabilities... Whatever the driver name is, a good thing would be the > name of the protocol or something generic enough, though powermust is > fine. Ok, I made some minor changes to powermust, to make it less

On Mon, Oct 20, 2008 at 1:35 PM, Arjen de Korte <nut+devel at de-korte.org> wrote: > Citeren Carlos Rodrigues <cefrodrigues at gmail.com>: > >> BTW, the patch has a small typo in one of the comments: "applied to >> battery.volage" :) > > I'll leave that up to you to correct. Since it is only a comment, it won't > be visible to innocent users

On 10/08/2012 21:58, nut-upsuser-request at lists.alioth.debian.org wrote: >>> Arnaud Quette<aquette.dev<at> gmail.com> writes: >>>> 2012/6/3 Chris Rees<crees<at> freebsd.org>: >>>>> Hi all, >>>> Hi Chris, >>>> >>>>> After some research I've found that this device should run with the

Dear R-ers, While browsing the R sources, I found the following piece of code in src\main\memory.c: static void reset_pp_stack(void *data) { R_size_t *poldpps = data; R_PPStackSize = *poldpps; } To me, it looks like the poldpps pointer is a nuissance; can't you just cast the data pointer and derefer it at once? Say, static void reset_pp_stack(void *data) { R_PPStackSize = *

Hi Sven, 2008/1/25, Sven Koch <haegar at sdinet.de>: > Package: nut > Version: 2.2.1-1 > Severity: normal > > I am using a Mustec PowerMust 1000 USB, connected with a USB cable to > the PC. > > With nut 2.2.0-2.1 everything works without problems - but since the > 2.2.1-1 update the "upsdrvctl start" from the init script just fails, > executing the

fellows, I'm preparing the 2.0.5 release (as always, the Christmas release). I just wanted to be sure: - everybody's in sync (Carlos, IIRC you had some megatec things underway?!) - that the brief NEWS message fits everybody (analyzing the real diff between the Testing+trunk backport and the last trunk backport over Testing was a mess). Since I'm on vacation for a week as of next

can you also give a try to megatec and send us back some upsc output of your various tests? Mathias Mayrhofer wrote: > > Arnaud QUETTE wrote: > > > Mathias Mayrhofer wrote: > it works (except of the temperature) > > thanks a million!! > > > > Sorry to bother you, > > > 'nut' is great (it was the only thing that worked on by belkin usv), >

Hello Fabian, > I got my UPS (Belkin F6H350deUNV) to work with the "megatec" driver. > Obviously the de/uk part in the name of these products are > localizations of some sort. So the F6H 350/500/750 UNV Home Office > products should all work with that driver. > > bigone nut # upsc ups@localhost > battery.charge: 95.0 > battery.voltage: 13.50 >

Hello, I have bought Powerman Optima 500 Plus UPS. While this product might be unknown outside Russia, it is shipped with megatec software and obviously works with megatec driver in NUT. besides the following problems (I think they are caused by one reason): 1) megatac driver is able to load and detect UPS only on second or third run. On the first run it typically fails. Later if daemon is

Hi Andy, I've forwarded your info to the development list, and Carlos Rodrigues (the megatec driver author and maintainer. As a side note, there is a megatec_usb driver underway. You might want to give it a try. @Carlos: I let you update the drivers.list. Thanks for your report, Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader -

Hi guys, Please bare with me, as this is my first attempt at setting up a UPS under Linux. I've been trying to setup a UPS on one of my clients servers. The model of the UPS is a Square one QP1000/QP1010 1Kva I've looked on the following link http://eu1.networkupstools.org/compat/stable.html It says that it should be compatible with the "powermust" driver, then in my

Hi Mutlu, 2009/8/7 Mutlu T. <cmtunc at gmail.com> > Redirecting to debian.org domain due to being rejected as spam by free.fr > > > ------- Forwarded message ------- > From: "Mutlu T." <cmtunc at gmail.com> > To: arnaud.quette at free.fr > Cc: > Subject: New NUT HCL entry / (brand)Inform (series)Informer Compact > Date: Fri, 07 Aug 2009 15:31:04