similar to: Belkin and newhidups (was: Belkin F6C550-AVR UPS)

Hi, I've been fighting with trying to get a Belkin Universal model F6C800-UNV to work with NUT. The error I am getting is as follows: ---------------------------------------------- * Starting UPS drivers ... Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - Belkin 'Universal UPS' driver 0.06 (2.0.0) tcgetattr(/dev/ups): Inappropriate ioctl for device Driver failed

Just a little tiny detail : ============================================================================== > --- trunk/scripts/hotplug/libhid.usermap (original) > +++ trunk/scripts/hotplug/libhid.usermap Fri Aug 25 19:18:19 2006 > @@ -21,5 +21,7 @@ > libhidups 0x0003 0x09ae 0x1003 0x0000 0x0000 0x00 0x00 0x00 0x00

All, I just bought a Belkin F6C1100-UNV and am trying to get it to work with NUT. I have tried many drivers ( "belkin", "belkinunv", "genericups upstype=4", and "genericups upstype=7", "bestups", "fentonups"). None of them seem to work. Does anyone have any experience with this device? If there is some utility that you all use to

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi, I got a Belkin F6C550-AVR UPS today and was trying to get it working with NUT, I used the "hidups" driver and got some data out of it, mainly the following: battery.charge: 100 battery.runtime: 120 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.mfr: Unknown ups.model: Unknown ups.serial: Unknown ups.status: OL the versions of NUT that I tried

Hi Peter, I got all your patches and applied them, and I wanted to say kudos for a great job done. This is the output of upsc that I'm getting right now. I had the same issue when using any cvs version (from two weeks ago) that made my UPS go into a state where it wasn't functioning normally (checking the kernel log shows that it cannot be connected and I had around a page of DEVFS_USB

I'm trying to set up a belkin f6c1100-unv UPS to work with nuts. From reading the mailing list, it sounds like the belkinunv serial driver should work and that the USB driver is potentially troublesome. Is this a correct impression? Also I may have missed this but if I do go with the serial (or USB port) is there any simple command line method for verifying basic connectivity? The

Hi Arjen My apologies fro drifting off topic in the other mailing list...:-) On the bottom of the Belkin UPS unit - is the model number: F6C120auUNV The "au" is for Australia I think. "man belkinunv" states that F6C120-UNV is supported - and I assumed that the "au" would not prevent this. I plugged in the USB to gather the information you requested. My intention

I just bought a pair of Belkin USB UPSes -- F6C1200-UNV and F6C550-AVR -- and installed the latest version of nut under Ubuntu 7.04. I'm using the F6C1200-UNV. My system does see the device; dmesg says [ 82.718428] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 82.941189] usb 2-2: configuration #1 chosen from 1 choice [ 83.036825] usbcore: registered new driver

I just bought a pair of Belkin USB UPSes -- F6C1200-UNV and F6C550-AVR -- and installed the latest version of nut under Ubuntu 7.04. I'm using the F6C1200-UNV. My system does see the device; dmesg says [ 82.718428] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 82.941189] usb 2-2: configuration #1 chosen from 1 choice [ 83.036825] usbcore: registered new driver

I recently installed NUT 2.2.1 and set it up with a Belkin F6C100-UNV. I can monitor it via serial (belkinunv) or USB (usbhid-ups) cable, and both do seem to work fine, but I would prefer USB to avoid having to add a PCI serial card to the machine. I had to unplug something else to try it with a serial cable. Using 'belkinunv', there's a "-x wait" option: [ from

For the record, I was able to get the following working: Device: Belkin F6C1500-TW-RK Driver: belkin I tried the "belkinunv", which I use for my F6C1100-UNV, but it didn't work. At least there was a driver that worked! :-) Feel free to add it to the list of "tested" configs. Thanks, Dave ---------------------------------------------------------- Are Your Friends

Greetings all; I pulled a Belkin F6C100-4 into the shop this afternoon, deader than a door nail. Out of service for about a year because (I'm assuming here) that the cooling fan stopped and cooked what little remaining life there may have been out of the batteries, which had swelled so badly I had to split its frame to get them out. They are also in the under 1 volt per 12 volt pack

Hello list, I am trying to configure Belkin F6C550-AVR UPS on a Squeeze server. I try with "usbhid-ups" but I get "(driver(s) failed)" message on service start. This is my config: nano /etc/nut/nut.conf MODE=standalone nano /etc/nut/ups.conf [belkin] driver = usbhid-ups #driver = megatec_usb port = auto nano /etc/nut/upsd.conf LISTEN 127.0.0.1 3493 nano

Hello, I am attempting to set up nut 2.6.2-1on a Fedora Core 14 64-bit platform for Belkin F6C550-AVR. The installation is from the official Fedora RPM. /etc/ups/ups.conf is as follows: [belkin] #??? driver = blazer_usb ??? driver = usbhid-ups ??? port = auto Attempting as root: [root at calypso ~]# upsdrvctl start Network UPS Tools - UPS driver controller 2.6.2 Network UPS Tools - Generic HID

Peter, Apparently, some Belkin UPSes still have problems with this. When we receive this report through the interrupt pipeline it is ignored (the special case in usbhid-ups.c) and even after that it looks like there are still some problems with it: http://lists.alioth.debian.org/pipermail/nut-upsuser/2007-July/003014.html Wouldn't it be an option to just to ignore this completely and

Hi I'm sending this to you as it appears that you are the person who looks after and/or supervises the code for NUT's Belkin drivers. I'm using the address you use for the Nut-upsdev mailing list ( selinger at mathstat.dal.ca ). Anyway... I have a Belkin Universal UPS and, having just upgraded my Fedora Core system from 4 to 5 and had to go back through the system RC files

Mr. Selinger, I'm CCing you directly since it appears (insofar as I can tell) that you are one of the delelopers for the newhidups driver. This is the third time I've submitted this (hence the CC this time). Hopefully mailman takes it. I've tweaked my SPF records, and I'm hoping that was the problem. My sincere apologies if this has gone through and I just haven't seen it