similar to: How do I get the richcomm_usb driver

Thanks for reply. when i try richcomm_usb or blazer_usb or other usb i get the output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925

Hi, I'm trying to configure my ups with nut which is a locally made one. It uses a rs232 port to talk to the computer and comes with a software called "Powermanager Lite" which is provided by Richcomm and supports Windows, Linux and UNIX. According to the manual it uses the Richcomm circuitry to talk to the computer and uses a drycontact protocol. Unfortunately I couldn't

I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is Vultech, but lsusb gives me this: Bus 003 Device 006: ID 0925:1234 Lakeview Research and I found an article about this hardware here, someone had it working with the richcomm_usb driver: http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html So, I installed nut and configured my UPS to work with the

Heya, first time posting to a mailing list so please excuse me if I do something wrong :) I'm new to NUT and trying to get things working on my TrueNAS, I have a "Vultech 1500VA" UPS which comes with the software "PowerManager II" and it seems to be using the "richcomm_usb" driver. There are 5 devices in the compatibility list and I tried all of them, sadly to

Greets... ..just bought a cheap UPS today, works in debian 7.0 wrt nut 2.6.4 using richcomm_usb driver... ....output of upsc..... //// root at debian7:~# upsc starpower at localhost device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

On Thu, Dec 4, 2008 at 4:51 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Thu Dec 4 21:51:28 2008 > New Revision: 1596 > > Log: > Added new richcomm_usb driver based on the lakeview_usb driver (using libusb). Sorry if I wasn't clear - I was advocating *renaming* the lakeview_usb driver to richcomm_usb. Is there another

Digitus DN-170014 root at home:/home/scripts# upsc ups device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.4 driver.version.internal: 0.04 ups.mfr: Richcomm dry-contact to USB solution ups.model: UPS USB MON V1.4

Hi, are this UPS supported by any other driver than "richcomm_usb". The device works with richcomm_usb, but only signals online, offline etc. Not voltage, batterylevels etc. Bus 006 Device 009: ID 0925:1234 Lakeview Research Bus 006 Device 009: ID 0925:1234 Lakeview Research Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10

I set the ups.conf to: driver = richcomm_usb port = auto now it is connected. There were the vendor variable and product id wrong. These are the variables i get in my OMV service output: device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

----- Forwarded Message ---- From: Terry Powling <terrypowling at yahoo.co.uk> To: nut-upsuser at lists.alioth.debian.org Sent: Sat, 27 February, 2010 22:30:05 Subject: trouble setting up kebo-1000d ups (usb) Trying to setup Kebo ups-1000D with usb port. lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0925:1234 Lakeview Research Bus 002 Device

Hello and welcome! Just recently there was a trip down the memory lane with another device with Richcomm-based hardware, and ultimately nutdrv_qx driver happened to support that one: https://github.com/networkupstools/nut/issues/2395 Some key take-aways were: * try starting the driver with bumped debug verbosity (e.g. from command line, or using a `debug_min` setting with NUT v2.8.0 and

Hi I am running FC5 with nut coming from the fc5 extras repositories. I am trying to configure a Gamatronic D-Compact ups. The cable that came with the ups has a serial connector on one end and a usb on the other. cat /proc/bus/usb/devices produces T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P:

Hallo all. I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. i tried the blazer_usb <http://www.networkupstools.org/docs/man/blazer_usb.html> driver and others but i didn't succeed. My lsusb says Bus 002 Device 005: ID 0925:1234 Lakeview Research Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 004 Device 004: ID 0424:2228 Standard

Hello guys, Please help me to resolve the issue. I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup NUT 2.6.0 to work with it. blazer_ups driver doesn't recognize the UPS :( The Manufacturer provides 'PowerD' software for linux with installation instractions on a CD (see example below). --------===------- Welcom to PowerManager System!

Folks, I'm fairly new to this whole Linux UPS thingie, but I'd quite like to have a look at getting my UPS to work under Linux and would be grateful for any help in getting a driver. I have a reasonable working knowledge of Linux and software development, and thus am happy to modify config files, alter kernel settings, etc, although I'm no C guru. I have a Kebo UPS-650D, which

Hi all, i've read a thread about this UPS from Peter van Valderen. He tried to develop a driver for this specific type of UPS. I've downloaded nut-2.2.2 and tried to apply the patches (lakeview.patch & lakeview.v2.patch) but both resulted in rejected chunks. I've tried to ./configure with type lakeview and then a make, but the make command fails. Does anybody has any

On Jan 22, 2016, at 6:02 PM, Andreas Cattelan <ilmondodiwit at gmail.com> wrote: > > I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. > > i tried the blazer_usb driver and others but i didn't succeed. > > > My lsusb says > > Bus 002 Device 005: ID 0925:1234 Lakeview Research > It might work with richcomm_usb:

Hello I have a Linux machine (Ubuntu 8.04 hardy, Gcc version 4.2.4 (i486-linux-gnu) currently running R 2.6.2. I'd like to upgrade to 2.10. First Question): What is the appropriate way to remove the old version of R? Part 2. After downloading r-base_2.10.0.orig.tar.gz and opening the archive. I ran the ./configure routine. It failed claiming that it could not find the F77 compiler. My

Hello all! I get a compilation error with '--without-snmp' option. Can someone help please? Thanks in advance Sergey Env: === 1. Nut-2.6.2 2. gcc-3.3.6 ----- ./configure -q --prefix=/usr --with-drivers=richcomm_usb --with-user=upsd --with-group=upsd --with-cgi --with-cgipath=/www/cgi-bin --with-htmlpath=/www --with-statepath=/var/state/ups --without-wrap --without-snmp --without-serial

2011/6/1 Sergey Talchuk <tals1975 at gmail.com> > Hi Arnaud, > Hi Sergey, > Vivaldi 650VA UPS works with richcomm_usb driver. > (USB ID 0925:1234) > http://www.vivaldi.su/products/ups/1949.htm > thanks for your report, I've committed an entry in the hardware compatibility list (r3017), and it's part of the just-release 2.6.1. cheers, Arnaud -- Linux / Unix