similar to: Nut-upsuser Digest, Vol 75, Issue 11

Hi, I'm using macports to install nut on a MAC OS X (10.7) I get the following error messages when I try running: sudo blazer_usb -a zigor -DDDDDDDDDD 0.944590 Checking device (0001/0000) (250/005) 2.785449 - VendorID: 0001 2.785465 - ProductID: 0000 2.785468 - Manufacturer: unknown 2.785472 - Product: STD UPS MON V1.0 2.785475 - Serial Number: unknown

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):

Hi all, Will ldd display the paths to different libraries depending on their locations? I'm trying to build libxml2 version 2.9.6 in /usr/local with a newer version of zlib (1.2.8) than what are in the system folders for CentOS 6.8. I get the following output from ldd: $ ldd ./libxml2.so ./libxml2.so: /lib64/libz.so.1: version `ZLIB_1.2.3.3' not found (required by ./libxml2.so)

Hi I installed R-1.5.1 on a Mac G4 under OS X 10.2.1 Jaguar, which requires X11. Then I got this while trying to run XDarwin I downloaded from Fink: --- [YonedaK-mac4:~] yoneda% startx -- -quartz ... dyld: xterm Undefined symbols: xterm undefined reference to _tgetent expected to be defined in /usr/lib/libSystem.B.dylib xterm undefined reference to _tgetstr expected to be defined in

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good day to all. In one of the offices I'm administering there are about 15 UPS marked with the brand "Ippon BackPro". This brand is widely popular in Russian Federation, while by itself is a 'Made in PRC' megatec clone. Depending on the model this UPSes have got either one standard serial RS-232C interface (cheaper models like

Dear Steve, Thanks. Until today I could not install the nut in my raspberry. All installation good, but with my ups " Ovislink Chrome 1000VA" and "nutdrv_atcl_usb" driver, it inform me the following error details. I can startup nut but nutmon don't receive anything only (lost conection). My setup: root at pi1:/nut# lsusb Bus 001 Device 002: ID 0424:9512 Standard

On Mon, Oct 22, 2012 at 10:17:56AM -0700, Nick Kledzik wrote: > Jack, > > I looks like the code is calling dlopen() on LLVMPolly.so and it or something it links against has an initializer. The initialer is run before dlopen() returns and the crash is in the initializer. The message: > > dyld: fast lazy bind offset out of range (53437, max=7640) in image

Hi, if I want to use 'llvm-gcc' I get: dyld: Library not loaded: /opt/local/lib/libiconv.2.dylib Referenced from: /Users/me/llvm/gcc/bin/llvm-gcc Reason: Incompatible library version: llvm-gcc requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 Trace/BPT trap So I installed MacPorts and 'libiconv', but I get the same error message. But it _should_

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello 2All. Today I had purchased Ippon Smart Power Pro 1400 UPS for my home PC. It is a higher class device relative to Ippon Back Pro model line. It has one RS232 port and one USB port to connect the monitoring station to. UPS talks with megatec protocol, RS232 works as usual. USB connection is done through Cypress Semiconductor usb-to-serial chip

Tobias, Can we add something like the following to polly 3.4? Index: CMakeLists.txt =================================================================== --- CMakeLists.txt (revision 195142) +++ CMakeLists.txt (working copy) @@ -81,9 +81,14 @@ set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PAT FIND_PACKAGE(Isl REQUIRED) FIND_PACKAGE(Gmp REQUIRED) -FIND_PACKAGE(Cloog) FIND_PACKAGE(Pluto)

<facepalm ;)> the ellispis "something=..." were supposed to be replaced by your device ID numbers, etc. On Sat, Sep 23, 2023, 18:26 FatGear <fatgear1 at free.fr> wrote: > Hello There, > > I tried your advice and i don't think it works either, > > See the logs, > > " > > /tmp/nut# ./drivers/usbhid-ups -DDDDDD -d1 -s test -x port=auto -x

Hello There, I tried your advice and i don't think it works either, See the logs, " /tmp/nut# ./drivers/usbhid-ups -DDDDDD -d1 -s test -x port=auto -x vendorid=... -x productid=... -x subdriver=... Network UPS Tools - Generic HID driver 0.52 (2.8.0-2557-g81fca30b2) USB communication driver (libusb 1.0) 0.46 ?? 0.000000??? [D3] main_arg: var='port' val='auto' ??

On Dec 5, 2009, at 1:27 PM, Nico wrote: > Hi, > > if I want to use 'llvm-gcc' I get: > > dyld: Library not loaded: /opt/local/lib/libiconv.2.dylib > Referenced from: /Users/me/llvm/gcc/bin/llvm-gcc > Reason: Incompatible library version: llvm-gcc requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 > Trace/BPT trap > > So I

Hi all, I couldn't cross-compile NUT for uClibc x86_64 with shared libm, but the problem may show up with any other target as well. ldexp() requires "-lm" and most toolchains are happy without it, but picky ones aren't. This is a trivial patch to keep all linkers happy. Regards, diff -Naubr nut-2.7.2.old/drivers/Makefile.am nut-2.7.2.new/drivers/Makefile.am ---

[please keep the discussion on the nut-upsdev list. thanks!] On Jan 30, 2014, at 10:20 AM, Jos? Sosa wrote: > Dear Mr. Lepple > > I am Leonardo Sosa and I am watching this issue with Rodolfo and Ronaldo. (in copy) > > See below our answers of your questions. > > What should I do now in order to include our code sgs_command in your code blazer_usb.c? As I mentioned to

Evening All, So I need a call graph pass and having done several other passes, I went to work on a simple pass, inheriting from CallGraphSCCPass. However, while I was quickly able to build the pass, when I went to run it I got the following: opt -load ../Passes/HierchalFunctions/Hierchal/hierchal.dylib -hierchal < hello.bc > /dev/null Error opening

Hi Volker Kuhlmann and Richard Nelson, As both of you are interested in where I got up to with getting my Dynamix 1000 VA UPS working with Linux, here is the details. It works.. But not too well, as the driver still seems to need some work, and is not in the main nut source as far as I know. It also seems to sometimes not respond when it should. The manufacture has uses the same format as

I think I may be of some help in this matter. Since I am running a bunch of Raspberry Pi's with NUT and it took a lot of hacking to make it possible. You could probably copy and paste this right into a shell script and just run it ... # Do an rpi-update FIRST to prevent USB strangeness #some depencies from repo sudo apt-get -y install m4 libtool libudev-dev automake #fixing autoconf for

On 12/18/2015 10:01 PM, hyouko at gmail.com wrote: > 3 additional requests: > - can you plug the UPS to the serial port and test it with nutdrv_qx > (still with a debug level of 5)? > - can you test the UPS with blazer_usb and blazer_ser with a debug level of 3? > - which version of libusb/libusb-compat do you have? Exact versions: Information for package libusb-0_1-4: