similar to: Tripp Lite 2010 results

Greetings. I have a Tripp-Lite AVR-900U that I am trying to get work with NUT. (I rather naively bought the thing assuming that since NUT worked with the AVR-750U, that the same would be so of this model.) Here's what I've got so far: # upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 This

Hi, I kludged support for the TrippLite SU2200XLA into nut-2.4.3 as follows: --- ./drivers/tripplite-hid.c.0 2010-03-03 15:53:20.000000000 -0500 +++ ./drivers/tripplite-hid.c 2010-03-03 15:53:40.000000000 -0500 @@ -81,6 +81,8 @@ { USB_DEVICE(TRIPPLITE_VENDORID, 0x4002), battery_scale_1dot0 }, /* e.g. TrippLite SmartOnline SU1500RTXL2ua */ {

[please use reply-all to post to the list - the mailing list does not add a reply-to header. thanks!] On Dec 18, 2017, at 11:37 AM, Ken Olum wrote: > > I have a Tripp-Lite BCPERS450, connected to a system running Ubuntu > 16.04.3 LTS and NUT 2.7.2-4ubuntu1.2. I had to make my own > /lib/systemd/system-shutdown/nutshutdown, but now everything is working > except for powering on

Hi, I'm running the latest stable nut (2.4.3). It doesn't appear to provide support for the Tripp Lite SmartOnline SU1000XLA. [sups] driver = usbhid-ups port = auto vendorid = 09ae productid = 4004 4337# upsdrvctl start Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using subdriver:

Trying to get a Tripp-Lite to work with nut--Ubuntu 10.10. I was getting the error message "unable to claim USB device", tried to unbind the drivers to that device, and had the following delightful experience. In short, continue to get the same problem, and the drivers bound themselves back. Any suggestions? ----------- usb.conf has the following: [Tripp-Lite] driver = usbhid-ups port

Device manufacturer and name: Tripp-Lite OmniSmart500 upsc output: matt at backup:/etc$ sudo upsc tripplite battery.charge: 100 battery.test.status: Battery OK battery.voltage: 14.56 battery.voltage.nominal: 12 device.mfr: Tripp Lite device.model: OMNISMART500 device.type: ups driver.name: tripplite_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3

Hi, I recently purchased a Tripp Lite SMART1000RM2U UPS (http://www.tripplite.com/en/products/model.cfm?txtSeriesID=744&txtModelID=2657) and tried to configure the NUT with tripplite_usb driver and encounter the following problems: 1. battery.charge doesn't report correct charge level when the UPS is On Batter. It just reports 0. Even though it will report 100 when on line power. 2. I

I'm trying to set up a single host to monitor the state of several UPS in my data center. I have a mix of several APC and Tripp-Lite in production. The former are great, the latter are not so much. With the APCs (using usbhid-ups), I can set up configs for each based on the value they report from ups.serial. With the Tripp-Lites (using tripplite_usb), there is no value returned for

I have the following UPS that I'm trying to get to work with NUT: SU3000RTXL3U I have it connected via USB. My ups.conf looks like: [test] driver = usbhid-ups vendorid = 09ae port = auto When I run upsdrvctl -DD start, I get: Network UPS Tools - UPS driver controller 2.4.1 Starting UPS: test exec: /lib/nut/usbhid-ups -a test Network UPS Tools - Generic HID driver 0.34 (2.4.1)

I have been working on supporting the TrippLite Internet350SER (serial connection only using communication protocol 1004) in nuts.2.4.1. I sent a patch around 2009/11/9. I just look at the 2.4.3 release and the support for this model does not look to be added in either tripplite driver. Can I help to add support in the project? -- Pat This electronic message may contain proprietary and

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM

Since version 2.0.5 the AVR550U is supported. The X version however is not. The difference, as far as I can see, is the voltage 120V (non-X) vs 230V (X). Is there a way to fake the productid of the X version? Or, alternatively will the X version be supported in the future? Checking device (09AE/1009) (001/004) - VendorID: 09ae - ProductID: 1009 - Manufacturer: Tripp Lite - Product: TRIPP LITE

Greetings, I have a Tripp-Lite SU6000RT4U unit connected via USB and RS-232. # tripplitesu -DD -u root -a tl6000 Unable to detect Tripp Lite SmartOnline UPS on port /dev/ttyS0 # tripplite -DD -u root -a tl6000 Failed to find UPS - giving up... # newhidups -DD -u root -a tl6000 Checking device (09AE/4002) (001/003) - VendorID: 09ae - ProductID: 4002 - Manufacturer: Tripp Lite - Product: TRIPP

I have an SMX1500SLT running on USB just fine. I not want to buy/add a SMARTINT1500. However before doing so I was trying to make sure there was a chance it would work under Nut. The SMX1500SLT has both serial and USB, but the SMARTINT1500 has only serial. I was therefore trying to switch the SMX1500SLT to serial to ensure the server comms were ok, and that there was some chance that the

Hi Patrick, in February, you tried to post the below message to the nut-upsuser list, but the post was rejected because you were not subscribed to the list. Unfortunately, you did not subscribe and re-post it. Anyway, I have been working on Tripp-Lite support for newhidups recently, and I wonder if you have any feedback. Did you ever get this device to work? >From the information you sent,

Hi Mauel, No dice. The config does not show up config: --8<-- [tripp] driver = usbhid-ups port = auto vendorid = 09ae productid = 2009 bus = 001 desc = "Tripp Lite SMX1000LCD" runtimecal = 660,100,180,50 -->8-- output: --8<-- upsc tripp Init SSL without certificate database battery.charge: 100 battery.runtime: 736 battery.type: PbAc

Hello! I am currently having issues monitoring a Tripp-Lite AVR900U. First, here are a few system details: > Manjaro Linux - kernel 5.4.30-1 > network-ups-tools 2.7.4-5 (built from Arch User Repository) > (lsusb output) Bus 003 Device 003: ID 09ae:3024 Tripp Lite AVR900U Contents of /etc/ups/ups.conf: > [tripplite] > driver =  usbhid-ups > port = auto Contents of

i just purchased a tripp lite OMNIVS1500XL and have been attempting to get it working with the usb drivers since it doesn't have a serial port. it hasn't been anywhere near successful and i was hoping someone might be able to point me in the right direction. i run gentoo and this is what i currenlty have installed: nut 2.0.2 libusb 0.1.10a (gentoo modified) usbutils 0.11-r5

I'm trying to get a SMART2200CRMXL to work with nut, using a USB cable. tripplite_usb -a upsname returns: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. No matching USB/HID UPS found My system info: CentOS 5.5 nut installed from repo upsd version 2.2.2 TrippLite SMART2200CRMXL

On Mar 6, 2015, at 12:51 PM, Eric Cobb <Eric_Cobb at tripplite.com> wrote: > Network UPS Tools - Tripp Lite OMNIVS / SMARTPRO driver 0.20 (2.6.5) > Warning: This is an experimental driver. > Some features may not function correctly. > > Detected a UPS: Tripp Lite /TRIPP LITE SMART500RT1U > Unknown input voltage range: 0x02 > Unknown number of switchable load banks: