Displaying 20 results from an estimated 1000 matches similar to: "Ippon Back Power Pro 700 USB driver."
2013 Apr 28
1
ippon back power pro 700 on FreeBSD 9.1-R
Hello, i'm trying to use nut with ippon back power pro 700 on FreeBSD
9.1-R with USB driver blazer_usb, and connection with UPS is unstable.
I'm starting it:
office at root # /usr/local/etc/rc.d/nut start
Network UPS Tools - UPS driver controller 2.6.5
addchar: discarding invalid character (0xe2)!
addchar: discarding invalid character (0x80)!
addchar: discarding invalid character (0xb3)!
2009 Jun 18
0
Question about nut 2.4.1 and Ippon smart power pro 2000
Hi all!
I have a ups Ippon smart power pro 2000. And it connects to my FreeBSD
7.2 x86 server throught usb. I'm try to setup it in nut with
megatec_usb driver... But it is not recognizes ups.
I'm try set productid and vendorid in ups.conf, but this is not help.
Nut version 2.4.1 below i'm add output of lsusb, my ups.conf and /usr/local/libexec/nut/megatec_usb -a IPPON -DDD
2010 Jan 18
1
blazer_usb vs. Ippon Smart Power Pro 1400
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello 2All.
Today I had purchased Ippon Smart Power Pro 1400 UPS for my home PC.
It is a higher class device relative to Ippon Back Pro model line. It has one
RS232 port and one USB port to connect the monitoring station to. UPS talks with
megatec protocol, RS232 works as usual. USB connection is done through Cypress
Semiconductor usb-to-serial chip
2008 Jun 25
1
[nut-hal-drivers] Battery level is not correct for Ippon Back Comfo Pro UPS with Megatec protocol.
Hello,
I'm trying to get my UPS working with nut-hal-drivers, and it seems be detected
correctly with Megatec protocol, but it provides wrong battery level.
I read that I can use battvolts option to fix this problem, but HAL version of
nut does not come with any config files. So, I'm guess it should be somehow
fixed in sources?
Parameters of Ippon Back Comfo Pro 800:
VA = 800
max
2008 Sep 16
1
ippon smart power pro 1000
Hi!
I'm having problems connecting Ippon Smart power pro 1000 UPS to nut via usb
under FreeBSD 7-stable
The UPS uses megatec protocol and works fine via RS232 (UPS has RS232 and
USB connectors)
When I connect USB /dev/uhid0 is created. Tried port=/dev/uhid0 - doesn't
work.
Kernel rebuild w/o option uhid.
On connect I get 2 devices /dev/ugen1, /dev/ugen1.1. Tried both of them.
2011 Feb 16
3
Ippon Smart Winner 750/1000/1500/2000/3000
Have anybody expirience with
Ippon Smart Winner 750/1000/1500/2000/3000
with serial interface ?
I have tryed megatec and blazer_ser drivers with no success:
[IPPON]
driver = megatec
port = /dev/ttyd0
desc = "IPPON smart winner 1500VA"
model = "Smart Winner 750/1000/1500/2000/3000"
# ./megatec -a IPPON -DDD
Network UPS Tools - Megatec
2007 Jan 08
0
Re: nut: Ippon driver with SmartWinner 1000: charge value fix
Hello Ace,
2007/1/6, ace <ace@ezotop.ru>:
> Hello Arnaud,
>
> Ippon driver with SmartWinner 1000: charge value fix
>
> nut-2.0.2:ippon.c:line 31:
> -- bcharge = ((atof (batvlt) - 10.2) / 3.4) *100.0;
> ++ bcharge = ((atof (batvlt) - 24.0) / 3.4) *100.0;
>
> sorry for no comments, i'm bad in english
the ippon driver has just been removed from the nut trunk,
2013 Dec 07
0
[nut] Ippon response length fix (#80)
On Dec 7, 2013, at 5:43 AM, Denis Yantarev wrote:
> Ippon Back Power Pro responses are always padded to 64 bytes beyond \r payload terminator. When checking that command was successful (i.e. not echoed back) code relies on the response length reported by blazer_command which will always be 64. To fix this ippon_command should return actual payload length. This change also affects
2011 Apr 12
1
blazer & megatec drivers
Hi,
I've being using nut 2.2.2 (Debian Lenny) via megatec_usb driver for
IPPON Back UPS 600.
Then I upgraded to nut 2.4.3 (Debian Squeeze) with broken megatec_usb.
I moved to blazer_usb, it connected IPPON.
[myups]
driver = blazer_usb
port = /dev/usb/hiddev0
desc = "Local UPS"
#from megatec.c: batteries[] = {{ 12.0, 9.0, 16.0, 9.7, 13.7, 0.0 },
2009 Mar 17
2
blazer_usb - short reply
Hello!
I'm trying to use nut with a Ippon Smart Winner 3000 UPS
(http://shop.key.ru/photo/items/45535.jpg) which looks like a
custom-labeled OEM model of the megatec branch.
I tried both the megatec_usb and the blazer_usb drivers for it, with a
obvious config section:
[ippon]
driver = blazer_usb
port = auto
vendorid = 06da
productid = 0003
desc = "Ippon Smart Winner 3000"
If I
blazer_usb: compatibility with Ippon BackPro UPSes (Phoenix Power Co., Ltd usb-to-serial controller)
2010 Jan 06
1
blazer_usb: compatibility with Ippon BackPro UPSes (Phoenix Power Co., Ltd usb-to-serial controller)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Good day to all.
In one of the offices I'm administering there are about 15 UPS marked with the
brand "Ippon BackPro". This brand is widely popular in Russian Federation, while
by itself is a 'Made in PRC' megatec clone. Depending on the model this UPSes
have got either one standard serial RS-232C interface (cheaper models like
2014 Jun 02
2
blazer_ser battery.high / battery.low
On Jun 2, 2014, at 6:48 PM, Charles Lepple wrote:
> On Jun 2, 2014, at 12:25 PM, Andreas Lausch / TBT wrote:
>
>>
>> Hi,
>>
>> thanks for the reply.
>>
>> On 2014-05-29 05:21, Charles Lepple wrote:
>>>> Now my questions:
>>>> 1. should the blazer_ser's high voltage be the voltage during charging
>>>> or right
2008 Dec 19
1
megatec_usb: Ippon BackComfoPro (06da:0003 Phoenixtec Power)
Hello.
I've been experimenting with the USB connection of an Ippon BackComfoPro
800. This is the device "06da:0003 Phoenixtec Power Co., Ltd". The
current SVN version of NUT does not work with this device. The
megatec_usb driver can't get a proper reply to a Q1 request, failing
with an error message about "short read (14 bytes)" instead.
I have found the reason for
2009 Jun 30
2
Is any ideas about Ippon smart power 2000?
Hi friends! It is not any answer to my previous letter about problem
with nut 2.4.1 and ippon smart power 2000 UPS with megatec_usb driver.
Maybe any additional information needed? Please help, any required
info i get.
--
? ?????????,
vk mailto:vk at union-metall.ru
2009 Jul 19
1
Problem with nut 2.4.1 & Ippon 2000 Smart power on FreeBSD
Hi all!
Maybe possible adds something in megatec_usb driver for normal working
with ippon 2000?
This is output for drivers megatec_usb and blazer_usb:
===========================================================
gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON
Network UPS Tools - Megatec protocol driver 1.6 (2.4.1)
Serial-over-USB transport layer 0.10
debug level is '4'
Checking
2013 Aug 11
2
N-Power MEV-3000LT compatibility report and problem
Hello list,
first of all, I'd like to report that my UPS
N-Power MEV-3000LT
(http://www.380v.ru/catalogue/micro-ups/mega-vision , in Russian),
which is not in the hardware compatibility list, is mostly supported
by the blazer_ser driver. I have very strong grounds to believe that
this (and other) N-Power UPS'es are rebranded for Russian and
Italian markets from their counterparts
2008 Sep 11
2
Ippon device does not work
I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to
connect it using USB.
lsusb -v says:
Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
2020 May 19
2
NUT -2.7.4 with Tripp Lite SMX1000 LCD on RPI4 runing 64bit ubuntu 20.04
Hi Manuel et.al,
Going thru the documentation -- it seems this configuration specific
to blazer_ups.
https://networkupstools.org/docs/man/blazer_usb.html
Kind Regards,
Yogesh
On Fri, May 15, 2020 at 12:53 PM Manuel Wolfshant
<wolfy at nobugconsulting.ro> wrote:
>
> On 5/15/20 12:13 PM, Yogesh Bhanu wrote:
> > [...]
> > # Is it possible to calculate /estimate how much
2014 Jun 03
0
blazer_ser battery.high / battery.low
On 2014-06-03 00:58, Charles Lepple wrote:
>> I'm pretty sure I wouldn't rely on a charge percentage derived this way ;-)
It's nice to see how much time one has left, event if it's not perfectly
accurate.
>> As mentioned in the other thread about the tripplite_usb driver, apart from having two sets of calibration constants, one for OL and one for OB, there is no
2017 Jun 12
2
Help with Elite 800VA usb UPS
Thanks a lot, I will do it and keep you informed.
Best regards
Andrea
2017-06-12 12:34 GMT+02:00 Manuel Wolfshant <wolfy at nobugconsulting.ro>:
> On 06/12/2017 12:56 PM, Andrea de Lutti wrote:
>
>
>
>> > I have also successfully tested the battery...
>> >
>> > upscmd -uadmin -pups Elit at artu test.battery.start.quick
>>
>> I would also