similar to: Two identical UPS's on USB - how to diferentiate?

Hi, recently I got a GE EP6000R UPS. At first I feared it's not supported at all, but after digging in I found out that it's supported by the 'blazer' driver. The UPS has both RS232 and USB connection. To use the RS232 connection, I had to use the 'cablepower = none' as the UPS is using only RX, TX and GND pins. So my 'usp.conf' was a bit like that: > [myups]

Hi, I just got two new UPS's - GE EP6000R. These have both RS232 and USB connection. As far as I could detect these are not supported by NUT. However, they provide some Linux software and as long as these UPS's are not in production (another week or so) I could 'play' with them to try to get some protocol information. Though I would need some pointers on how to do it... Mind you

Device manufacturer: GE Digital Energy (http://www.gedigitalenergy.com/powerquality/catalog/rackmountnet.htm) Device name: GE EP6000R (http://www.gedigitalenergy.com/powerquality/catalog/rackmountnet.htm) *upsc:* * battery.voltage: 272.40 * battery.voltage.nominal: 240.0 * beeper.status: disabled * device.type: ups * driver.name: blazer_usb * driver.parameter.bus: 004

Got a problem after upgrading Samba from 3.0 to 3.5 - have a bunch of users and groups in LDAP and things work for the most part. However, when people try to change permissions from within Windows, some usernames or groupnames are shown properly, but other are not - they see the SID. Following up I noticed, that I can get a list of all users with 'wbinfo -u' and that I can get a SID for

Hi, I have three Xen hosts running Xen 4.0.2 (OpenSuSE 11.4 based). I also have one ''NFS'' server with an NFS export holding VM images and configuration files. Each host has a dedicated LAN link directly to the NFS server. I have another separated NFS export for VM locking (but I had the same issues before). When I attempt to live migrate a VM, it *looks''*like

Hi, I''m running Xen server based on OpenSuSE 11 (Xen version 3.2.1_16881_04-4.2). I have several Linux DomU''s that run perfect. Now I need a temporary Vista install (for testing) so I used ''virt-manager'' to install Vista. I used LVM based setup, Vista got 4GB of memory (at least temporary) and 2 CPU''s. Initially things look good - I get the console

Hi, does anyone know the above mentioned UPS and whether it's supported by NUT? It has an RS-232 interface, the manual talks about a 'Java Universal Management Platform' (JUMP) software (which I can't find). Thanks, Danilo -------------- next part -------------- A non-text attachment was scrubbed... Name: danilo_godec.vcf Type: text/x-vcard Size: 315 bytes Desc: not available

> Hello everyone. I try to connect four PowerMust 2000 ups's via usb to one > computer using megatec_usb driver. But megatec_usb completly ignores port > directive in ups.conf, I even try port = /dev/null and megatec_usb founds > ups and it works. The 'port' is not used for USB connected devices, it's only needed for compatibility reasons. > Problem is that

Hi, I have a Xen server running OpenSuSE 10.2, with Xen version 3.0.3_11774. It''s happily hosting two DomU''s running the same OS / kernel. Now I tried to create a new DomU running a newer OS - OpenSuSE 11.1. It comes with Xen version 3.3.1_18494_03. Unfortunately for me, it doesn''t work - this is what I get: > xen1:/etc/xen/vm # xm create NEW > Using config file

Dear developers! I''ve found that recent xen releases cannot be simly run on openSUSE! The script /etc/xen/scripts/xen-network-common.sh makes some incorrect assumptions on the SuSE ifup script. Bridged xen networking only works if the script executes this branch: preiftransfer() { true } ifup() { false } ifdown() { false } Otherwise the xen networking scripts fail to put the

Here is my setup. samba+winbind on OpenSuse 11.3 (samba 3.5.4). Using winbind to auth to another samba+ldap server. Authentication works until first failed login: host:~ # wbinfo -a prod\\user%goodpass plaintext password authentication succeeded challenge/response password authentication succeeded host:~ # wbinfo -a prod\\user%badpass plaintext password authentication failed Could not

Hello, I'd like to pass throug two identical devices to my VM. (using libvirt, guest is debian). For one device, it works like this: <hostdev mode='subsystem' type='usb'> <source> <vendor id='0x4fa'/> <product id='0x2490'/>

Hello, I re-post my question from some days ago, as I got no reply.. Please let me know, if my question is unclear, or if I can do anything to make answering it easier. I appreciate your help. Greetings, Hendrik Hello, I'd like to pass throug two identical devices to my VM. (using libvirt, guest is debian). For one device, it works like this: <hostdev

Hi, I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help. Here is the output that I see. co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Communications with UPS lost:

On 06/19/2017 11:02 AM, Manuel Wolfshant wrote: > Thank a lot ! > Now, conclusions after attempting builds ( with no docs included since > attempting to enable them triggers the errors related to missing or > too old tools mentioned by me in an earlier message ) > - building against libsub 1.0 triggers the following 2 errors : > nutdrv_qx-nutdrv_qx.o: In function

Hello, I'm looking for a UPS that the beeper can be silenced with nut via ups.beeper.status variable for a HTPC close to bedrooms. I have googled extensively and there is not a lot of information about which UPS's actually support this feature. There are few references to UPS's that apparently list ups.beeper.status as being available, but without actually being

tags 354429 + upstream thank 2006/2/26, suicune@eml.cc <suicune@eml.cc>: > Package: nut > Version: 2.0.1-3 > > > This is the spam message: > drivers/usb/input/hid-core.c: ctrl urb status -32 received > > I never once saw this message until after I installed and configured > nut. > > Spam begins during boot and continues infinitely until reboot or nut is >

Hi, Creating a new domain is a lot easier in opensuse 11. I follow the instruction on the website and build a virtual machine which uses opensuse 11 as well (I installed it from iso image). Everything works fine except the network. I cannot access the Internet from DomU. Here is some information. P.S. the DomU id is 1. "brctl show" in Dom 0: bridge name bridge id STP

I've used NUT successfully for monitoring many different brands of UPS, but this one has me stumped. It has the same manufacturer ID and Product ID as older supported MGE-type Eaton UPS's, but has trouble talking. I tried Ubuntu's repo NUT, and it logs a Connecting to UPS message every few seconds forever, but never really succeeds (or says it fails). Different failure mode after

On 2013-11-20 6:20 PM, Charles Lepple wrote: > > No need to switch to serial if USB is working - there should be a nut-usb package or similar. You will probably have to remove nut-hal to install nut-usb. The nut+upsd+upsmon solution is mutually exclusive with nut-hal, but they use the same device-specific code, and it sounds like your device is compatible. What yum shows me is: (this is on