Displaying 20 results from an estimated 6000 matches similar to: "[HCL] Hardware Compatibility List - PowerWalker VI 850 LCD"
2023 Nov 27
1
APC Modbus support is finally here!
Jim Klimov <jimklimov+nut at gmail.com>
>
> I believe some fixes were applied to the branch since your report (most visibly, about battery time settings), are you in position to test how it behaves now? :)
Hi:
I got another ups for testing. so I test the new commit for both
APC SRT3000XL and SMT2200RM2U. the results below:
1. I get the new attribute "ups.test.result" for
2023 Nov 27
1
APC Modbus support is finally here!
Jim Klimov <jimklimov+nut at gmail.com>
>
> I believe some fixes were applied to the branch since your report (most visibly, about battery time settings), are you in position to test how it behaves now? :)
Hi:
I got another ups for testing. so I test the new commit for both
APC SRT3000XL and SMT2200RM2U. the results below:
1. I get the new attribute "ups.test.result" for
2023 Nov 24
1
APC Modbus support is finally here!
I believe some fixes were applied to the branch since your report (most
visibly, about battery time settings), are you in position to test how it
behaves now? :)
Thanks in advance,
Jim Klimov
On Wed, Nov 22, 2023 at 3:20?PM Jim Klimov <jimklimov+nut at gmail.com> wrote:
> Great! Thanks for the info, and hope the driver author can address the
> nits (forwarding now...)
>
> Jim
2023 Nov 24
1
APC Modbus support is finally here!
I believe some fixes were applied to the branch since your report (most
visibly, about battery time settings), are you in position to test how it
behaves now? :)
Thanks in advance,
Jim Klimov
On Wed, Nov 22, 2023 at 3:20?PM Jim Klimov <jimklimov+nut at gmail.com> wrote:
> Great! Thanks for the info, and hope the driver author can address the
> nits (forwarding now...)
>
> Jim
2011 Jul 17
2
POWEREX VI 1000 LED
Hi Sergey,
2011/7/15 Sergey Talchuk <tals1975 at gmail.com>
> Hi Arnaud,
>
> both configurations are ok :). Please find the file attached.
>
logic since the 2nd is automatically guessed from the first using USB Vendor
and Product ID ;-)
can you please send in upsc, upscmd and upsrw output.
and also report the shutdown testing as described here:
2013 Dec 02
0
Installing NUT for PowerWalker VI 1500 LCD
[Please subscribe to the mailing list: http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser ]
On Nov 28, 2013, at 4:10 PM, Danijel ?ili wrote:
> Since the provided drivers come with absolutely no installation instructions, I turned to NUT.
>
> The compatibility list says "blazer_usb" should be used for PowerWalker's devices, so that's what I put in my
2020 Jan 08
1
unexpected UPS status
On Wed, 8 Jan 2020, Gene Heskett wrote:
> On Wednesday 08 January 2020 06:44:03 Roger Price wrote:
>> I am surprised that there is no ups.delay.start for this UPS.
> My new APC Smart-UPS_1500 doesn't have it either.
Hello Gene, The NUT 2.7.2 "device dump library" entry for the APC Smart-UPS 1500
at https://networkupstools.org/ddl/APC/Smart-UPS_1500.html shows an entry
2020 Jul 07
2
New UPS to the DB
Hi, I have an OEM of KStar UDC9101S which is Megatec protocol rs232 capable
unit.
So I use blazer_ser protocol=megatec /dev/ttyUSB0 with no issue to get NUT
running.
Please direct me what command should I issue to collect the data in order
to include the UPS to device database?
P.S. tryed /lib/nut/blazer_ser -DD... but no difference from a regular
output has being added by the driver.
2013 Nov 28
2
Installing NUT for PowerWalker VI 1500 LCD
Since the provided drivers come with absolutely no installation
instructions, I turned to NUT.
The compatibility list says "blazer_usb" should be used for PowerWalker's
devices, so that's what I put in my conf:
[pwvi]
driver = blazer_usb
port = auto
desc = "PowerWalker VI 1500 LCD"
Since I use Ubuntu Server 13.10 so I installed nut from apt.
2016 Nov 09
3
Powerwalker VI 2200VA LCD
Hi,
- The device never re-connects to the system, i have to physically remove the USB plug and insert it again for the device to come back.
- This does not happen when running the driver from the supplier. (java process)
- When i poll every 60s it works for about 3 days, anything lower or higher causes it to disconnect faster
- The big log i sent is not the output of the driver? if not how can i
2020 Oct 26
2
Can't get CyberPower UPS to work with Raspberry Pi 4
On Monday 26 October 2020 09:01:31 Charles Lepple wrote:
> On Oct 25, 2020, at 11:52 AM, Robert Stocker <kneadtoknow at gmail.com>
wrote:
> > Init SSL without certificate database
> > battery.charge: 100
> > battery.charge.low: 10
> > battery.charge.warning: 20
> > battery.mfr.date: CPS
> > battery.runtime: 15690
> > battery.runtime.low: 300
2023 Nov 22
1
APC Modbus support is finally here!
Great! Thanks for the info, and hope the driver author can address the nits
(forwarding now...)
Jim
On Wed, Nov 22, 2023, 15:05 d tbsky <tbskyd at gmail.com> wrote:
> Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net>
> >
> > Got an update for APC Modbus users: a new PR is waiting for real-life
> testing for settable variables and instant commands
2023 Nov 22
1
APC Modbus support is finally here!
Great! Thanks for the info, and hope the driver author can address the nits
(forwarding now...)
Jim
On Wed, Nov 22, 2023, 15:05 d tbsky <tbskyd at gmail.com> wrote:
> Jim Klimov via Nut-upsuser <nut-upsuser at alioth-lists.debian.net>
> >
> > Got an update for APC Modbus users: a new PR is waiting for real-life
> testing for settable variables and instant commands
2011 Mar 26
1
Help with Aiptek PowerWalker VFI 1000 LCD and Konig CMP1200
Hello,
I have just installed nut_2.6.0 from Debian testing, do anyone know the
correct driver for this ups? The blazer_usb don't report
battery-charge, the bundled software report charge and runtime.
root at pluto<~>upsc powerwalker
battery.voltage: 40.86
battery.voltage.nominal: 36.0
beeper.status: enabled
device.mfr:
device.model: HV 1K
device.type: ups
driver.name: blazer_usb
2013 Dec 02
5
Installing NUT for PowerWalker VI 1500 LCD
On Mon, Dec 2, 2013 at 2:25 PM, Charles Lepple <clepple at gmail.com> wrote:
>
> [Please subscribe to the mailing list: http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser ]
>
> On Nov 28, 2013, at 4:10 PM, Danijel ?ili wrote:
>
> > Since the provided drivers come with absolutely no installation instructions, I turned to NUT.
> >
> > The
2010 Oct 15
1
Is in in process driver for AIPTEK UPS PowerWalker VI 2000 LCD USB
Hi NUT developers!
Are there in progress development of NUT driver that supports
AIPTEK PowerWalker VI 2000 LCD - Art-No 310064
(http://www.powerwalker.com/line-interactive.html)?
Thank you in advance!
Regards,
Dimitar Angelov
2016 Oct 03
2
Powerwalker VI 2200VA LCD
Hi,
The UPS is now connected via HID-USB, but seems to randomly disconnect.
Sometimes after a few hours, other times days...
Any suggestions?
-------- Original Message --------
Subject: Re: [Nut-upsuser] Powerwalker VI 2200VA LCD
Local Time: October 2, 2016 11:50 PM
UTC Time: October 2, 2016 9:50 PM
From: hyouko at gmail.com
To: Lars de Bruin <lars at larsdebruin.net>
nut-upsuser
2016 Sep 27
2
Powerwalker VI 2200VA LCD
Hi,
I am unable to get my UPS working with NUT.
Information:
lsb_release -a:
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 8.0 (jessie)
Release: 8.0
Codename: jessie
apt-cache policy nut-server:
nut-server:
Installed: 2.7.2-4
Candidate: 2.7.2-4
Version table:
*** 2.7.2-4 0
500 http://mirrordirector.raspbian.org/raspbian/ jessie/main armhf
Packages
2016 Oct 02
0
Powerwalker VI 2200VA LCD
> [powerwalker]
> driver = blazer_usb
> vendorid = 06da
> port = auto
> desc = "Powerwalker VI 2200VA LCD"
> productid = ffff
> bus = "001"
The VID/PID combo 06da/ffff is used by some devices supported by the
'usbhid-ups' driver: did you have a chance to try it?
2016 Nov 22
1
Powerwalker VI 2200VA LCD
I dont think the logs ends to early.
The UPS had been offline for 1 day at least before i stopped the process.
Could the issue be that NUT driver does not see the USB device disconnect?
-------- Original Message --------
Subject: Re: [Nut-upsuser] Powerwalker VI 2200VA LCD
Local Time: 11 November 2016 1:12 AM
UTC Time: 11 November 2016 00:12
From: hyouko at gmail.com
To: Lars de Bruin