similar to: Vivaldi UPS

Hi Sergey, 2011/7/15 Sergey Talchuk <tals1975 at gmail.com> > Hi Arnaud, > > both configurations are ok :). Please find the file attached. > logic since the 2nd is automatically guessed from the first using USB Vendor and Product ID ;-) can you please send in upsc, upscmd and upsrw output. and also report the shutdown testing as described here:

Hi Arnaud, I received several replies from technical support. It turned out that according to the UPS serial number it had been manufactured in 2012. So, the device should support the ability to disable the beeper. But still I can not disable the beeper using the latest version of UPSMON Plus in Windows: http://www.pcm.ru/data/download/public/soft/setup_upsmon_v2.9.rar (don't know why; the

Hi, are this UPS supported by any other driver than "richcomm_usb". The device works with richcomm_usb, but only signals online, offline etc. Not voltage, batterylevels etc. Bus 006 Device 009: ID 0925:1234 Lakeview Research Bus 006 Device 009: ID 0925:1234 Lakeview Research Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10

Hello all! I get a compilation error with '--without-snmp' option. Can someone help please? Thanks in advance Sergey Env: === 1. Nut-2.6.2 2. gcc-3.3.6 ----- ./configure -q --prefix=/usr --with-drivers=richcomm_usb --with-user=upsd --with-group=upsd --with-cgi --with-cgipath=/www/cgi-bin --with-htmlpath=/www --with-statepath=/var/state/ups --without-wrap --without-snmp --without-serial

Hi Charles, Yes, it looks like my g++ does contain STL library which might be just my specific case... However, as a temporary solution I disabled nutclient in Makefile (please find the file attached). And nut-2.7.3 can be compiled now. Thanks, Sergey On Wed, Jul 8, 2015 at 4:13 AM, Charles Lepple <clepple at gmail.com> wrote: > On Jul 6, 2015, at 10:32 AM, Sergey Talchuk

I set the ups.conf to: driver = richcomm_usb port = auto now it is connected. There were the vendor variable and product id wrong. These are the variables i get in my OMV service output: device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

On Jul 6, 2015, at 10:32 AM, Sergey Talchuk <tals1975 at gmail.com> wrote: > /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../include -MT nutclient.lo -MD -MP -MF $depbase.Tpo -c -o nutclient.lo nutclient.cpp &&\ > mv -f $depbase.Tpo $depbase.Plo > libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../include -MT nutclient.lo -MD -MP -MF

2015-07-06 10:40 GMT+02:00 Sergey Talchuk <tals1975 at gmail.com>: > Dear developers, > > libnutclient has been added as a C++ alternative to libupsclient in 2.7.1. > As a result I can't compile nut 2.7.3 with gcc-3.3.6. There wasn't such a > problem with nut-2.6.5. > > Is it possible to add a configuration parameter like > '-without-libnutclient' to

Thanks for reply. when i try richcomm_usb or blazer_usb or other usb i get the output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925

I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is Vultech, but lsusb gives me this: Bus 003 Device 006: ID 0925:1234 Lakeview Research and I found an article about this hardware here, someone had it working with the richcomm_usb driver: http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html So, I installed nut and configured my UPS to work with the

Hello guys, Please help me to resolve the issue. I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup NUT 2.6.0 to work with it. blazer_ups driver doesn't recognize the UPS :( The Manufacturer provides 'PowerD' software for linux with installation instractions on a CD (see example below). --------===------- Welcom to PowerManager System!

Sergey, I?m no expert on this but I have been reading the driver code, trying to sort out bigger problems with the OpenUPS driver! I can make 2 observations that I can?t check out myself : ?beeper.disable? was previously ?beeper off? - and ?beeper.enable? was ?beeper.on?. Not sure if it?s worth trying the old versions? If your UPS doesn?t wait for LB, could this be because there is another

Greets... ..just bought a cheap UPS today, works in debian 7.0 wrt nut 2.6.4 using richcomm_usb driver... ....output of upsc..... //// root at debian7:~# upsc starpower at localhost device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

----- Forwarded Message ---- From: Terry Powling <terrypowling at yahoo.co.uk> To: nut-upsuser at lists.alioth.debian.org Sent: Sat, 27 February, 2010 22:30:05 Subject: trouble setting up kebo-1000d ups (usb) Trying to setup Kebo ups-1000D with usb port. lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0925:1234 Lakeview Research Bus 002 Device

I am a complete novice in this area so please bear with me. I have installed nut version 2.6.2-1 for my debian 64bit system. I am trying to implement 'nut' for a new VIX2120 home UPS and have determined that I need the richcomm_usb driver [usb 0925:1234]. But it is not in /lib/nut although referenced in the documentation (driver.list) How do get hold of a copy? Due to ignorance I am not

Hi Philip, I've updated NUT to 2.7.3 and finally found the root cause for the unexpected shutdown: It is recommended to increase pollinterval to 10 seconds in ups.conf for usbhid-ups driver due to a known issue: http://www.networkupstools.org/docs/man/usbhid-ups.html Default DEADTIME=15 in upsmon.conf was triggering shutdown. Increasing the value to 30 seconds resolved the issue. Now when

Digitus DN-170014 root at home:/home/scripts# upsc ups device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.4 driver.version.internal: 0.04 ups.mfr: Richcomm dry-contact to USB solution ups.model: UPS USB MON V1.4

On Jan 22, 2016, at 6:02 PM, Andreas Cattelan <ilmondodiwit at gmail.com> wrote: > > I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. > > i tried the blazer_usb driver and others but i didn't succeed. > > > My lsusb says > > Bus 002 Device 005: ID 0925:1234 Lakeview Research > It might work with richcomm_usb:

Hi Charles, Thanks for the prompt reply! Errors occur when execute make: /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I../include -MT nutclient.lo -MD -MP -MF $depbase.Tpo -c -o nutclient.lo nutclient.cpp &&\ mv -f $depbase.Tpo $depbase.Plo libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../include -MT nutclient.lo -MD -MP -MF .deps/nutclient.Tpo -c

I'm totally new to this, so heres hoping i can give you the info you need ... I have a new Trust usb UPS hooked up to my iMac (running Lion) The UPS shows up in the system report with the following info: Product ID: 0x0003 Vendor ID: 0x06da (Phoenixtec Power Co., Ltd.) Version: 5.01 Speed: Up to 1.5 Mb/sec Manufacturer: CTN Location ID: 0xfa144400 / 10 Current Available (mA):