similar to: Richcomm Serial driver

Hi all, i've read a thread about this UPS from Peter van Valderen. He tried to develop a driver for this specific type of UPS. I've downloaded nut-2.2.2 and tried to apply the patches (lakeview.patch & lakeview.v2.patch) but both resulted in rejected chunks. I've tried to ./configure with type lakeview and then a make, but the make command fails. Does anybody has any

Thanks for reply. when i try richcomm_usb or blazer_usb or other usb i get the output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925

Heya, first time posting to a mailing list so please excuse me if I do something wrong :) I'm new to NUT and trying to get things working on my TrueNAS, I have a "Vultech 1500VA" UPS which comes with the software "PowerManager II" and it seems to be using the "richcomm_usb" driver. There are 5 devices in the compatibility list and I tried all of them, sadly to

On Thu, Dec 4, 2008 at 4:51 PM, Arjen de Korte <adkorte-guest at alioth.debian.org> wrote: > Author: adkorte-guest > Date: Thu Dec 4 21:51:28 2008 > New Revision: 1596 > > Log: > Added new richcomm_usb driver based on the lakeview_usb driver (using libusb). Sorry if I wasn't clear - I was advocating *renaming* the lakeview_usb driver to richcomm_usb. Is there another

Folks, I'm fairly new to this whole Linux UPS thingie, but I'd quite like to have a look at getting my UPS to work under Linux and would be grateful for any help in getting a driver. I have a reasonable working knowledge of Linux and software development, and thus am happy to modify config files, alter kernel settings, etc, although I'm no C guru. I have a Kebo UPS-650D, which

I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is Vultech, but lsusb gives me this: Bus 003 Device 006: ID 0925:1234 Lakeview Research and I found an article about this hardware here, someone had it working with the richcomm_usb driver: http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html So, I installed nut and configured my UPS to work with the

I am a complete novice in this area so please bear with me. I have installed nut version 2.6.2-1 for my debian 64bit system. I am trying to implement 'nut' for a new VIX2120 home UPS and have determined that I need the richcomm_usb driver [usb 0925:1234]. But it is not in /lib/nut although referenced in the documentation (driver.list) How do get hold of a copy? Due to ignorance I am not

Hi I am running FC5 with nut coming from the fc5 extras repositories. I am trying to configure a Gamatronic D-Compact ups. The cable that came with the ups has a serial connector on one end and a usb on the other. cat /proc/bus/usb/devices produces T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P:

I set the ups.conf to: driver = richcomm_usb port = auto now it is connected. There were the vendor variable and product id wrong. These are the variables i get in my OMV service output: device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

Hallo all. I tried to configure the UPS Trust OXXTRON 1300VA but i didn't succeed. i tried the blazer_usb <http://www.networkupstools.org/docs/man/blazer_usb.html> driver and others but i didn't succeed. My lsusb says Bus 002 Device 005: ID 0925:1234 Lakeview Research Bus 004 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade Bus 004 Device 004: ID 0424:2228 Standard

Hello and welcome! Just recently there was a trip down the memory lane with another device with Richcomm-based hardware, and ultimately nutdrv_qx driver happened to support that one: https://github.com/networkupstools/nut/issues/2395 Some key take-aways were: * try starting the driver with bumped debug verbosity (e.g. from command line, or using a `debug_min` setting with NUT v2.8.0 and

Greets... ..just bought a cheap UPS today, works in debian 7.0 wrt nut 2.6.4 using richcomm_usb driver... ....output of upsc..... //// root at debian7:~# upsc starpower at localhost device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

Digitus DN-170014 root at home:/home/scripts# upsc ups device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.4 driver.version.internal: 0.04 ups.mfr: Richcomm dry-contact to USB solution ups.model: UPS USB MON V1.4

Hello guys, Please help me to resolve the issue. I bought 'SVEN Power Pro+ 500 USB' UPS few days ago and tried to setup NUT 2.6.0 to work with it. blazer_ups driver doesn't recognize the UPS :( The Manufacturer provides 'PowerD' software for linux with installation instractions on a CD (see example below). --------===------- Welcom to PowerManager System!

----- Forwarded Message ---- From: Terry Powling <terrypowling at yahoo.co.uk> To: nut-upsuser at lists.alioth.debian.org Sent: Sat, 27 February, 2010 22:30:05 Subject: trouble setting up kebo-1000d ups (usb) Trying to setup Kebo ups-1000D with usb port. lsusb Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0925:1234 Lakeview Research Bus 002 Device

Hi Team, I am using libvirt module to retrieve configuration of the virtual machines, Can you please tell me how to retrieve the disk space of the Virtual machines. In my KVM hyper i am running two virtual machines. Regards Manzoor

It seems the `libmodbus` library or headers were not found, or something similar - so the driver against it was not built. Did you install `libmodbus-dev` before the build? What does `config.log` in the build root say (and.or the summary shown after you run the `configure` script)? On Sat, Sep 16, 2023 at 7:46?PM FatGear <fatgear1 at free.fr> wrote: > Hi, > > I don't know what

Centos 6.7 Linux man8.m1.manifest.co.uk 2.6.32-573.12.1.el6.i686 #1 SMP Tue Dec 15 18:25:17 UTC 2015 i686 i686 i386 GNU/Linux Installed: nut.i686 2.6.5-2.el6 @epel nut-cgi.i686 2.6.5-2.el6 @epel nut-client.i686 2.6.5-2.el6 @epel I'm struggling to control an

Hello there, I don't think that's working,? I have done all your repo but i don't know how it's supposed to work. I have a idea, change vendor id and product id? to make the driver try to connect to the ups, what do you think of that ? With this driver maybe : usbhid-ups FatGear Le 16/09/2023 ? 20:40, Jim Klimov a ?crit?: > It seems the `libmodbus` library or headers were

Hi, are this UPS supported by any other driver than "richcomm_usb". The device works with richcomm_usb, but only signals online, offline etc. Not voltage, batterylevels etc. Bus 006 Device 009: ID 0925:1234 Lakeview Research Bus 006 Device 009: ID 0925:1234 Lakeview Research Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10