similar to: GE EP series UPS

Hi, recently I got a GE EP6000R UPS. At first I feared it's not supported at all, but after digging in I found out that it's supported by the 'blazer' driver. The UPS has both RS232 and USB connection. To use the RS232 connection, I had to use the 'cablepower = none' as the UPS is using only RX, TX and GND pins. So my 'usp.conf' was a bit like that: > [myups]

Device manufacturer: GE Digital Energy (http://www.gedigitalenergy.com/powerquality/catalog/rackmountnet.htm) Device name: GE EP6000R (http://www.gedigitalenergy.com/powerquality/catalog/rackmountnet.htm) *upsc:* * battery.voltage: 272.40 * battery.voltage.nominal: 240.0 * beeper.status: disabled * device.type: ups * driver.name: blazer_usb * driver.parameter.bus: 004

Got a problem after upgrading Samba from 3.0 to 3.5 - have a bunch of users and groups in LDAP and things work for the most part. However, when people try to change permissions from within Windows, some usernames or groupnames are shown properly, but other are not - they see the SID. Following up I noticed, that I can get a list of all users with 'wbinfo -u' and that I can get a SID for

Hi, I got a bright idea to monitor CPU core temperature using ''lm_sensors''. I was testing on my quad-core desktop machine and everything seemed great. However - my Domain-0 has just two VCPU''s assigned to it and this is exactly what ''sensors'' report. Any ideas about how to work around that besides letting Domain-0 use all CPUs? Regards, Danilo

Here is my setup. samba+winbind on OpenSuse 11.3 (samba 3.5.4). Using winbind to auth to another samba+ldap server. Authentication works until first failed login: host:~ # wbinfo -a prod\\user%goodpass plaintext password authentication succeeded challenge/response password authentication succeeded host:~ # wbinfo -a prod\\user%badpass plaintext password authentication failed Could not

Hello Everyone! Been looking around the internet but have not found a solution for my problem yet, all i found was a report on opensuse forums with no replays. I have a Xen dom0 running on OpenSuse 11.4 x86_64, on this I’ve created 3 PV instances all running OpenSuse 11.4 x86_64 as well. All 3 PVs were installed the same way with the same package selection and only ONE of this 3 PVs hangs at

Hi, I have three Xen hosts running Xen 4.0.2 (OpenSuSE 11.4 based). I also have one ''NFS'' server with an NFS export holding VM images and configuration files. Each host has a dedicated LAN link directly to the NFS server. I have another separated NFS export for VM locking (but I had the same issues before). When I attempt to live migrate a VM, it *looks''*like

Hi, I''m running Xen server based on OpenSuSE 11 (Xen version 3.2.1_16881_04-4.2). I have several Linux DomU''s that run perfect. Now I need a temporary Vista install (for testing) so I used ''virt-manager'' to install Vista. I used LVM based setup, Vista got 4GB of memory (at least temporary) and 2 CPU''s. Initially things look good - I get the console

Hi, does anyone know the above mentioned UPS and whether it's supported by NUT? It has an RS-232 interface, the manual talks about a 'Java Universal Management Platform' (JUMP) software (which I can't find). Thanks, Danilo -------------- next part -------------- A non-text attachment was scrubbed... Name: danilo_godec.vcf Type: text/x-vcard Size: 315 bytes Desc: not available

Hi, I have two identical UPS's on USB bus. The original machine I was going to use for UPS monitoring only had had USB bus, so these two UPS's were seen like that: Bus 001 Device 009: ID 14f0:00c9 Bus 001 Device 007: ID 14f0:00c9 There was no description on the right side either. If I used the 'verbose' flag, both UPS's had the exact same output... I since replaced the

Dear developers! I''ve found that recent xen releases cannot be simly run on openSUSE! The script /etc/xen/scripts/xen-network-common.sh makes some incorrect assumptions on the SuSE ifup script. Bridged xen networking only works if the script executes this branch: preiftransfer() { true } ifup() { false } ifdown() { false } Otherwise the xen networking scripts fail to put the

Hi, I have a Xen server running OpenSuSE 10.2, with Xen version 3.0.3_11774. It''s happily hosting two DomU''s running the same OS / kernel. Now I tried to create a new DomU running a newer OS - OpenSuSE 11.1. It comes with Xen version 3.3.1_18494_03. Unfortunately for me, it doesn''t work - this is what I get: > xen1:/etc/xen/vm # xm create NEW > Using config file

Hi, Creating a new domain is a lot easier in opensuse 11. I follow the instruction on the website and build a virtual machine which uses opensuse 11 as well (I installed it from iso image). Everything works fine except the network. I cannot access the Internet from DomU. Here is some information. P.S. the DomU id is 1. "brctl show" in Dom 0: bridge name bridge id STP

BODY { font-family:Arial, Helvetica, sans-serif;font-size:12px; } Dear All, I am trying to use the virt-manager to install Xen Guest OS. I got the virt-manager installed and running on fc7 xen dom0 and am trying to install fc9 domU using virt-manager. I have only been able to find the install URL for fc9 (all other links fc6, fc7 etc does not work), but this URL doesnot complete the

Hi all! Does NUT offer any support for the GE Digital Energy NetPro 19" UPS? I have one of those beasts here, connected to a Linux machine via it's own 'serial' cable. Regards, Evert

Download the free ONIS viewer at http://www.onis-viewer.com/products.php?PHPSESSID=00d6f131fe9e7d49c1b15f7f9656060e Works fine for my GE Centricity images (X-Ray, CT and MRI) Good luck

Hello all, Does anyone know where I could turn to find out how to set up the NVIDIA driver to work properly on my Compaq Presario R3000? Thanks in advance, Phil

Hello, I've investigated some new commands (variables) for Victron/GE UPS. Unfortunatelly, I'm not a good programmer, so I cannot to modify the driver code by myself. May be, is it possible to add these variables to the main project? Variables are: ------------------------------------------------------------------------------------------------ GET: vZ1f? "no load shutdown (i.e.

Hi, I'm trying to figure out the best way to enable our GE LanPro LP 31 UPS to communicate with our mixed-bag environment of various Windows, Unix and Linux hosts and even some appliances such as NetApp. What I hope to achieve is a controlled shutdown of most systems when power is about to run out. The GE LanPro doesn't seem to be a very visible brand on the Internet, very few

Hi all We have a 100kVA GE LP Series UPS. I can't find this series in the HCL, but other GE UPSes are listed. Would it be possible to somehow use NUT with this UPS? -- Vennlige hilsener / Best regards roy -- Roy Sigurd Karlsbakk (+47) 98013356 roy at karlsbakk.net http://blogg.karlsbakk.net/ GPG Public key: http://karlsbakk.net/roysigurdkarlsbakk.pubkey.txt -- I all pedagogikk er det