similar to: Support for FSP EP1000

I am using dovecot in an SMEServer (aka e-smith), and recently backed-up on one system and restored on another system the imap email directories. The trouble was that dovecot "guessed" the mail type wrongly, and I ended up with "empty" ~/Mail directories (did it create or populate these?), and full, but ignored ~/Maildir directories for every user. Could someone point me

I am sorry if this is an FAQ, but there doesn't seem to be searchable archives, and the supported manufacturer's list doesn't include "surge master". Google was also not much help. I have just put a Linux box and the customer has a "surge max " UPS. Anyone any ideas what protocol it uses? There is a Green serial cable. The manufacturers web site is here:

Hi all, I've bought UPS FSP EP 850 because I have similar UPS, FSP EP 1000. It is working on my other server with with Fedora 14, kernel 2.6.35.14-106.fc14.x86_64 and installed nut-2.6.2-1. My new UPS is detected by kernel (see below lsusb output) and is partially detected by blazer_usb driver also. But it doesn't communicate with driver (see below blazer_usb output). I run all

Hi everybody, following UPS is successfuly tested. Model: FSP Champ Tower 1k https://www.fsp-europe.com/CS/champ-tower-series-1k2k3k/ lsusb: Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial ups.conf: [powerpal]     driver = blazer_usb     port = /dev/hidraw0 Mode = standalone Distro = CentOS 8 What I did to get UPS communicate. In terminal run as root: ln -s

Hi! Using this guide: http://blog.shadypixel.com/monitoring-a-ups-with-nut-on-debian-or-ubuntu-linux/ and systematically testing the usb capable driver on your site I managed to get my FSP EP650 (by http://www.fspgroupusa.com/ ) working (after reboot). Im running Ubuntu 9.10 desktop x64 standard install. This is the output from running "upsc ups1" ----- battery.voltage: 13.50

Hi Sven, 2008/1/25, Sven Koch <haegar at sdinet.de>: > Package: nut > Version: 2.2.1-1 > Severity: normal > > I am using a Mustec PowerMust 1000 USB, connected with a USB cable to > the PC. > > With nut 2.2.0-2.1 everything works without problems - but since the > 2.2.1-1 update the "upsdrvctl start" from the init script just fails, > executing the

I recently bought a Belkin F6H375 UPS. It connects to the computer via USB. Searching the Internet led me to believe that the megatec_usb driver in nut supports this UPS, however I've been unable to get it to work. I have this in ups.conf: [belkinusb] driver = megatec_usb port = auto desc = "Belkin USB" Here's what happens when I try to use it: ~ #

Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS. I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <adrian.czerniak at becomo.com> wrote:

Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS. I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <adrian.czerniak at becomo.com> wrote:

Hello to all list members, I'm trying to make my UPS work with nut-2.2.2 (using Debian Testing, but compiled from source code) for a week ago, with not success. It's a Unitek Alpha 1000Ps, and I supossed it would work with megatec_usb driver, as other Unitek models. It has an USB interface, and when I plug it into my system I've got this message: chopito:/home/jordi# dmesg | tail

Hi, I bought a Belkin Active Battery Backup UPS (http://www.belkin.com/uk/activebattery/) yesterday with a USB port and hoped it would work with nut. The device will show up in /proc/bus/usb/devices as a Cypress Semiconductor USB to Serial. It creates /dev/hiddev0 (and this disappears when the UPS is unplugged). I've tried using belkin, belkinunv, usbhid-ups and megatec_usb. I've tried

A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 188 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20071124/3ceb35d2/attachment.pgp

I just bought a pair of Belkin USB UPSes -- F6C1200-UNV and F6C550-AVR -- and installed the latest version of nut under Ubuntu 7.04. I'm using the F6C1200-UNV. My system does see the device; dmesg says [ 82.718428] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 82.941189] usb 2-2: configuration #1 chosen from 1 choice [ 83.036825] usbcore: registered new driver

I just bought a pair of Belkin USB UPSes -- F6C1200-UNV and F6C550-AVR -- and installed the latest version of nut under Ubuntu 7.04. I'm using the F6C1200-UNV. My system does see the device; dmesg says [ 82.718428] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 82.941189] usb 2-2: configuration #1 chosen from 1 choice [ 83.036825] usbcore: registered new driver

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi Jayson, I forward your request to the right place. Carlos (or some other) will have an answer, or at least some questions for you. -- Arnaud 2008/6/27 Jayson Anderson <jayson.anderson at gmail.com>: > Greetings Arnaud, > > I wrote you some time ago about whether NUT would support the Belkin > F6H550-UPS device in the future. > > You had replied and mentioned to send