similar to: Ubuntu server won't restart

Hi, In Debian lenny I used the following in upsd.conf: ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACL webinterface 192.168.0.2/32 ACL slave 192.168.50.22/32 ACCEPT localhost ACCEPT webinterface ACCEPT slave REJECT all and in upsd.users: [monmaster] password = secret0 allowfrom = localhost upsmon master [monslave] password = secret1 allowfrom =

Hi, I'm using debian sarge on my server and connected a MGE-ups ellipse via the serial port. I searched the internet for the answer, but can't find it. My config files: <upsd.users> [admin] password = pwd allowfrom = 127.0.0.1/32 actions = set instcmds = all [upsmon] password = pwd allowfrom = 127.0.0.1/32 10.0.0.224/32 upsmon master [upsslave] password

I'm trying to execute some commands on my ups, but I keep getting ERR ACCESS-DENIED upscmd -l sinus Instant commands supported on UPS [sinus]: beeper.toggle - Toggle the UPS beeper load.off - Turn off the load immediately load.on - Turn on the load immediately shutdown.return - Turn off the load and return when power is back shutdown.stayoff - Turn off the load and remain off shutdown.stop -

Hi all, We have recently bought an APC UPS and are in the process of setting up the NUT software to make use of it. We are experiencing a problem with the behaviour of the slave systems when the master system goes off line. Although the failure of our master system will (hopefully) be a rare event, and we hope not to experience too many power outages, it is possible (if unlikely) that both

I don't reply to messages send to me in private. Best regards, Arjen -- Please keep list traffic on the list -------------- next part -------------- An embedded message was scrubbed... From: Rudolf Cejka <cejkar op fit.vutbr.cz> Subject: NUT and removed allowfrom/ACCEPT/REJECT support Date: Mon, 14 Sep 2009 19:23:17 +0200 Size: 3148 URL:

Hi, this is my first nut installation, i see lot of connection failure and when i tried the configuration removing the power chord from the ups i expected tha machine will power itslef down but this has not happened. I'm using nut 2.2.2-2 from debian lenny, ups is a mustek powermust 2000 with usb cable. All config files are root:nut and 640, i've had to add nut user to nut group

Hello, I just upgraded my nut 2.2.1 setup to 2.4.1. The "upsdrvctl shutdown" command now works using a APC Backup-UPS CS350 via USB. Great! The removed ACL/allowfrom functionality can be replaced by tcp_wrappers. Unfortunately there isn't much documentation about the migration. First you have to compile nut with "--with-wrap". I have a special "nutadmin"

Hello! I am running Slackware Linux 10.2 with kernel bareacpi.i 2.4.31. My UPS is inform GUARD series line interactive UPS This is all the info I could extract from my UPS's documentation. I downloaded and installed the NUT Slcakware package nut-1.4.1-i486-1JKv. The hostname of my system is "marto", the domain name is "mydomain". Apart from the "root", I have one

Hello! I am running Slackware Linux 10.2 with kernel bareacpi.i 2.4.31. My UPS is inform GUARD series line interactive UPS This is all the info I could extract from my UPS's documentation. I downloaded and installed the NUT Slcakware package nut-1.4.1-i486-1JKv. The hostname of my system is "marto", the domain name is "mydomain". Apart from the "root", I have

Hy list, first of all - yes I have read the docs, but obvious I must have missed something. The user/password setting in upsd.users seems to be ignored and I can monitor the ups with some arbitrary password. The following setup is working: Server A has nut installed and has the following config: upsd.conf: ACL localnets 192.168.101.0/255.255.255.0 ACL localhost 127.0.0.1/32 ACL all

I got a bunch of configfiles that look like this: mgmt-dev:/etc/nut# grep -v 'niets' * ups.conf:[ups] ups.conf:driver=newhidups ups.conf:port=auto upsd.conf:ACL all 0.0.0.0/0 upsd.conf:ACL localhost 127.0.0.1/32 upsd.conf:ACL remote 192.168.110.0/24 upsd.conf:ACCEPT remote upsd.conf:ACCEPT localhost upsd.conf:REJECT all upsd.users:[monuser] upsd.users:password = mypass upsd.users:allowfrom

Hi thanks for the reply. The servers can ping each other... The router log doesn't show anything and I am the admin for the servers. The machines firewalls allow each other's ips etc. Part of the issue is possibly that I just don't know if I've set up NUT correctly for this arrangement? Like I say it works ok on LAN, but not across networks. Is there something I should be doing

Hi all, I've just upgraded my debian box from etch to lenny, and am now having Nut problems. I have read through the UPGRADING text (which helped fixed my first ups driver related problem), but have now hit another problem, which seems quite common, but non of the responses I've found on Google apply, so I'm coming to you for help. On issuing a "/etc/init.d/nut start"

Dears, I have centos 5.5 with kernel 2.6.18 UPS: Mustek PowerMust 2000VA USB I trying to setup monitoring for this ups, I connect ups with server via COM port and USB. But here is the problem (with megatec_usb): [root at optimus ups]# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools 2.2.0- - Megatec protocol driver 1.5.4 [megatec_usb] Carlos

hi i bought a ultra ULT31502 ups someone seem able to run this ups with nut just see Dean thread on: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=770423&Tab=11&NoMapp=0 i use suse 10.1, i installed nut the ups is connected directely to my computer with an usb cable lsusb return Bus 001 Device 004: ID 0d9f:0001 Powercom Co., Ltd with lsmod, i can see

And sorry, I forgot to put log from messages, I always got this: Oct 30 21:06:25 optimus kernel: usb 5-1: usbfs: process 9808 (megatec_usb) did not claim interface 0 before use From: nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org [mailto:nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org] On Behalf Of Vladimir Micovic Sent: Saturday, October 30, 2010 8:00

Hello, I'm facing problems as I'm installing NUT to monitor a MGE Ellipse ASR600USBS on a FreeBSD 6.1 box. UPS is recognized as : ugen0: MGE UPS SYSTEMS ELLIPSE, rev 1.10/42.41, addr 2 I'm temporarily using root profile (devfs/devd scripts not modified atm). newhidups starts & runs fine (unplugging mains makes newhidups outputs lots of data when started with -DDDD flags)

Here are the results from the output of upsc under different conditions from my Debian Test system with NUT 2.7.2 : Normal: ups.status: OL No wall power: ups.status: OB Runtime calibration (started from AP9630 web interface): ups.status: OB CAL So at this stage there is a difference! I then connected to my QNAP and set the UPS settings on the web interface to "Shutdown server if power

Hallo group, I am running openSUSE 10.3 with nut-2.2.0-20 installed. I have configured it as mentioned in /usr/share/doc/packages/nut/README.SUSE. on starting nut using "rcupsd start" i get following: # Starting NUT UPS monitor done Broadcast Message from root at pane (somewhere) at 22:27 ... Communications with UPS myups at localhost

Hi Everyone, I am new to UPSs and Linux.? I purchased a Belkin F6C750-AVR UPS for our church.? We are?running CENTOS 5.2. I tried the Linux Power Management Software that came with Belkin UPS with NO success. I installed the NUT software. After some experimentation I received some success with the megatec_usb Nut driver: [root at server bin]# /sbin/megatec_usb -u root -a serverups -DDDD