Hy list,
first of all - yes I have read the docs, but obvious I must have missed
something. The user/password setting in upsd.users seems to be ignored
and I can monitor the ups with some arbitrary password.
The following setup is working:
Server A has nut installed and has the following config:
upsd.conf:
ACL localnets 192.168.101.0/255.255.255.0
ACL localhost 127.0.0.1/32
ACL all 0.0.0.0/0
ACCEPT localnets localhost
REJECT all
upsd.users:
[admin]
password = hardertoguess
allowfrom = 64me
actions = set
instcmds = all
[upsmon]
password = hardtoguess
allowfrom = localnets
# give the rights required by a monitoring host:
upsmon slave
Now, if I run upsmon on a Server B with
upsmon.conf:
...
MONITOR mainups@ServerA 1 upsmon wrongpassword slave
...
Everything seems fine although Server B does not have the correct password.
Is this intended or what have I missed?
Micha
