similar to: Comet EXtreme 6 and mge-utalk

Hello I almost managed to make everything work my server isn't in prodution because i had some problem on others system but last week i come back and i run an update on ubuntu 12.04.1 to 12.04.2 I don't known if its' the reaseon or if someone has change something but scripts no longer work I have a message "returned 2" Can you help me because I don't find how to solve

Hello I'm back with another problem I made a lot of tests with my ups MGE I worked on my script upssched-cmd and i stopped several times my ups etc etc .... Suddenly my UPS wasn't be detected by my server I tried restore my system I tried modify files without success my UPS isn't detected by my serveur When I enter this command lsusb I have had no more this bus001 device 002 : ID

hello, I installed with NUT UPS MGE Pulsar Evolution 2200 all orders of arrest, interrogation etc etc ... UPS work well However, I have a problem with the order in NOTIFYCMD upsmon.conf that not run ... I created a script that generates a simply log I indicated in upsmon.conf NOTIFYCMD / home / nut / alert_ups.sh below my upsmon.conf RUN_AS_USER nut MONITOR pulsar at localhost 1 admin1

Hello My server with another UPS (MGE Pulsar Evolution2200 USB) is OK. All scripts work Is it possible to work with a UPS MGE CometExtrem 6 on serial port Which driver can I use ? I tried with mge-shut ou mge-utalk without any success when I start driver with upsdrvctl with mge-utalk I have (after a long time) Can't connect to UPS [MGE_cometEX] (mge-utalk-MGE_cometEX): No such

Hello, I have a EATON 5PX with a Network Management Card on ubuntu 12.04 I established a shutdown procedure like described in rogerprice.org It works I have an event mail on "onbatt" then another on "onbattdelay1" then the "upsmon -c fsd" order on "onbattedelay2" When "onbattdelay2" is finished, my server execute "auto logout and shutdown

Hello, I forgot nut since more than a year because a lot of job with other application My server nut failed since severals months We had 3 electric failure so I must install a new server nut I work with ubuntu 10.04.4 (64bits) / I installed nut 2.4.3 with deposits I have a MGE Pulsar evolution 2200 connected on usb last week when I began my tests all was ok (communication etc etc ..)

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

hello, at first I'm sorry my english isn't perfect but I tried to be clear I work with mandriva 2007 and with nut 2.0.1 installed with urpmi my UPS is a MGE Evolution 2200 connected with RS232 in my ups.conf I try to use mge-utalk driver and also mge-shut both seem to work I don't really known which I add to use It's the first point. As I saw on web site, I add maxage 25 in

Hi everybody, Sorry for the eternity it took to solve the UTalk problems, but I've been busy on so many fronts... I've updated the CVS Testing tree, which will soon become 2.0.3 stable release, with mge-utalk 0.87. This release fixes the UTalk problems you have recently faced. If possible, please test it and report back if it work or not with your unit. To do so: 1) Retrieve the source

?Hello Sabine, this seems as a problem with PATH env. variable; if you issue the command by hand, you do so in an environment with PATH set so that the binaries are found. I guess that the nut user doesn't have so nice PATH, being non-interactive. Try to add full paths to your binaries in the command and see what happens... Regards, vasek -- Vaclav Krpec NUT developer

Dear Sirs, I have an old but very well-working UPS MGE Pulsar ESV8+ Rack. I'd like to use it to power FreeBSD 9.0-Rel server. Of fortunately I have problem with recommended driver - mge-utalk, nut 2.6.4 (installed from FreeBSD Ports). I get messages: Could not get multiplier table: using raw readings. and updateinfo: Cannot update system status I saw similar thread on mailing list with no

Hi all ! I have communication issues between my station and my old Pulsar EX10 UPS, (U-Talk) connected by RS232, when using v2.4.1 of nut-server. I tried to come back to version 2.2.2 and then, communication start and is operational. Maybe it's linked to bug 498655, but i haven't seen any answer ? http://www.mail-archive.com/debian-bugs-dist at lists.debian.org/msg566711.html Here are

Hi All, I have an mge pulsar esv 14+ rackmount UPS connected via straight through serial cable to a USB to serial adaptor (My motherboard does not have a native RS232 port). I am running Ubuntu Server 9.04 x64, and nut 2.4.1-2ubuntu4 installed via APT. I am getting the error: Poll UPS [ups1 at localhost] failed - Driver not connected My conf files: (ups.conf) [ups1] driver=mge-utalk

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

hello, to use the function plot3d, i should use the package R.basic! plot3d {R.basic} If people know exactly a site to load this package, please give me the URL! Thanks Sabine --------------------------------- [[alternative HTML version deleted]]

hello, I tested all config with my ups and psp all seems to be OK now, I had change ups name and user name in ups.conf, upsd.users, upsmon.conf etc etc ... but I have quickly these events in my syslog without doing anyting what can I do ? Nov 15 11:09:22 mezenc upsmon[3865]: Poll UPS [pm2200 at localhost] failed - Data stale thanks a lot for your help Sabine GOUDARD Ecole Nationale

Hi, I would to get the first letter of a word like: > title_cat TitleCat 1 Training I would like T from Training! Thnaks a lot for your help Sabine --------------------------------- T侀l侀chargez le ici ! [[alternative HTML version deleted]]

Hi, we are using samba 3.0.10-17 with openlddap 2.2.6-37.22 as backend. We use roaming profiles, but because of problems with different operating systems and the profile size, we want to use locale profiles. I tried to change logon path in smb.conf in an emty string, but no changes, if I delete this entry in smb.conf, samba use a default value and this is on the server. So I tried to change

When I try to start R from my desktop, an "information"-window pops up: "Fatal error: Invalid HOMEDRIVE". I already deleted and reinstalled the program, but the problem lasts. How can I solve this problem? I would be very glad, if you can give me a hint, what??s going wrong. Best regards Sabine Bader -- Sabine Bader Hamburger Str. 83 44135 Dortmund 0231/7950683

There is a fairly straightforward way to load older versions of packages, and that is to use the 'groundhog' package. As the first sentence of https://groundhogr.com/ puts it: Make your R scripts reproducible by replacing library(pkg) with groundhog.library(pkg, date). pkg can be a vector of package names or a single name. On Wed, 11 Oct 2023 at 20:58, Uwe Ligges <ligges at