Displaying 20 results from an estimated 5000 matches similar to: "Upsdrv failed to start"
2010 Jul 24
1
NUT upsdrv Using bcmxcp_usb Won't Connect to UPS
I can't seem to get NUT to connect to my new PowerWare (Eaton) 5115.
(Linux 2.6.34.1 x86_64, Gentoo)
# /etc/init.d/upsdrv start
* Caching service dependencies ...
[ ok ]
* Starting UPS drivers ...
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3)
USB communication subdriver 0.18
2010 Nov 18
1
Mustek PowerMust 600 USB on Gentoo
Hi,
I'm trying to setup my Mustek 600 with USB (no serial ports on my computer)
on Gentoo. The configuration I use is:
[Mustek]
driver = megatec_usb
port = auto
desc = "Power Mustek 600 USB"
The NUT I use on my x86_64 machine is:
sys-power/nut-2.4.3-r2 USE="bash-completion ssl usb xml -cgi -hal -snmp"
When I start upsdrv I get:
weasel ~ # /etc/init.d/upsdrv start
2015 Nov 20
3
usbhid-ups dying, consistently
This issue has been occurring for years on my setup.
OS: Gentoo
most recent kernel: 4.1.12
UPS: Eaton Powerware 9130 rackmount 2000kVA, connected via USB
The upsdrv service dies and must be restarted several times a day.
Zero output to dmesg or any other log other than failed reattempts
reporting no such file or directory errors.
"/lib64/nut/usbhid-ups -DDD -q -a powerware" exited 1
2006 Aug 13
2
can't get UPSDRV to see serial port
First, a little history; nut has been working on this system for about
two years. It was a Fedora Core 2 (3?) system that I wiped and installed
SUSE 10.1 on so I'm fairly confident of the hardware. I thought I'd
saved the nut configuration details before I did the reinstall, but
can't find them. (D'oh!)
The UPS is an APC BackUPS Pro 420. The cable is a clone of the APC
2014 Feb 18
0
Wait for network delay
On 2014-02-16 16:36, Elliot Dierksen wrote:
> On 2/5/2014 8:24 AM, Charles Lepple wrote:
>> On Feb 4, 2014, at 10:48 PM, Elliot Dierksen wrote:
>>
>>> NUT will complain endlessly about communication errors and never
>>> establish SNMP communication with my APC UPS
>> Hmm, at first glance, I read the "complain endlessly" part as a figure
>> of
2013 Jun 20
3
Cannot connect to a Eaton Ellipse Pulsar ASR/6000VA usbs [solved] but new problem surfaces.
Hi Charles, thank you for your answer.
This was indeed the core of the problem. I have amended the configuration
files.
It means now the communication works as required. Alas I now have another
problem.
Just for the record here is the configuration after the changes.
The configuration is as follows.
#nut.conf
MODE=standalone
#ups.conf
[eaton]
driver = usbhid-ups
port = auto
2006 Sep 20
1
BlueWalker Powerwalker VI Line-Interactive UPS
Hi,
I have a small home-use UPS for my home server from powerwalker
(http://powerwalker.com/de/index.php?option=com_content&task=blogcategory&id=63&Itemid=106
sorry I only found a german version).
It has a USB and a serial connector. lsusb lists it as "06da:0003 Phoenixtec
Power Co., Ltd", in /proc/bus/usb/devices it sais "Manufacturer=OMRON"
and
2011 Apr 05
1
NUT upgrade to 2.6.0 in Gentoo with Liebert UPS
I have a 64 bit Gentoo, with a Liebert UPS. The last NUT working version
was sys-power/nut-2.4.1-r1 (I also tried sys-power/nut-2.4.3-r2 but
downgraded, don't remember the reason).
Anyway with the upgrade to sys-power/nut-2.6.0 I started to see this
error message when I try to start upsdrv:
[root at aemaeth:/etc/nut]$ /etc/init.d/upsdrv start
* Starting UPS drivers ...
Network UPS Tools -
2006 Dec 11
2
howto setup BNT-1500AP on gentoo
Good afternoon. I try to put nut on gentoo. Has executed installation
by a standard command emerge nut. All has passed successfully. I use
UPS POWERCOM BNT-1500AP. It is connected to serial port 1, i.e. for my
system it/dev/tts/0. In/etc/nut/ups.conf
[powercom]
driver = powercom
port = /dev/tts/0
desc = "PowerCom BNT-1500AP on IP-PBX"
modelname = "BNT-1500AP"
linevoltage = 230
2018 Jul 28
3
Can Not Get UPS to Turn Off After System Shutdown
I just installed NUT on a new Linux (Gentoo) system. Most things work,
(notification after 10 seconds on battery, notification and system
shutdown after 100 seconds on battery.) However I can't seem to get the
UPS (an Eaton 5SC1500) to turn itself off after the Gentoo system shutdown.
This is the shutdown command I am using in /etc/nut/upsmon.conf:
SHUTDOWNCMD "/usr/sbin/upsdrvctl
2010 Dec 03
2
nut 2.4 et MGE 2200 (suite)
Hello
I'm back with another problem
I made a lot of tests with my ups MGE
I worked on my script upssched-cmd
and i stopped several times my ups
etc etc ....
Suddenly my UPS wasn't be detected by my server
I tried restore my system
I tried modify files
without success
my UPS isn't detected by my serveur
When I enter this command
lsusb
I have had no more this
bus001 device 002 : ID
2010 May 10
3
Support for Tripp Lite SmartOnline SU1000XLA?
Hi,
I'm running the latest stable nut (2.4.3). It doesn't appear to provide
support for the Tripp Lite SmartOnline SU1000XLA.
[sups]
driver = usbhid-ups
port = auto
vendorid = 09ae
productid = 4004
4337# upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
Using subdriver:
2011 Aug 21
1
Tripp Lite 2010 results
Hi all,
As requested by upsdrvctl, I'm reporting on my results connecting a
Tripp Lite UPS (G1010USB). This server is running on Ubuntu Lucid, nut
version is 2.4.3-1ubuntu3.1.
With ups.conf:
[ups]
driver = usbhid-ups
port = auto
Results:
# upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
2011 Aug 15
2
Tripplite Smart1200LCD and Debian
Hey all,
I am trying to use NUT for a Tripplite Smart1200 LCD on a fresh copy of Debian 6.0.2.1. I installed NUT version 2.4.3 and I have pored through pages and pages of other posts, but for the life of me I can not get it to recognize the Tripplite. I know its an 09ae:2009 device and I've tried to add a rule in /lib/udev/rules.d/52-nut-usbups.rules as according to some posts, but to no
2018 Jul 28
0
Can Not Get UPS to Turn Off After System Shutdown
This really isn’t what you want.
You should use a normal shutdown command on Gentoo:
SHUTDOWNCMD "/sbin/shutdown -h +0”
When you emerged the NUT package, you should have seen this message:
* Please note that NUT now runs under the 'nut' user.
* NUT is in the uucp group for access to RS-232 UPS.
* However if you use a USB UPS you may need to look at the udev or
* hotplug
2011 Mar 06
1
Tripp-Lite AVR-900U
Greetings. I have a Tripp-Lite AVR-900U that I am trying to get work with
NUT. (I rather naively bought the thing assuming that since NUT worked with
the AVR-750U, that the same would be so of this model.)
Here's what I've got so far:
# upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
This
2011 Sep 14
1
driver error
Hi,
I'm trying to install NUT on Ubuntu. All is good until I try to start the driver, then I get this error:
$ sudo upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
This APC device (051d:0003) is not (or perhaps not yet) supported
by usbhid-ups. Please make sure you have an up-to-date version of
2010 Apr 29
1
APC Smart-UPS Pro 1500 USB monitoring trouble
Hi there... nut 2.4.3 kicks an error at me when I try
to talk to my UPS. machine is linux 2.4.21-32.ELsmp
with libusb-0.1.8-3 package update.
# /usr/local/ups/bin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.4.3
Network UPS Tools - Generic HID driver 0.34 (2.4.3)
USB communication driver 0.31
Using subdriver: APC HID 0.95
libusb_get_interrupt: error submitting URB: Invalid
2007 May 08
1
hardened kernel and nut access to ttyS
Hi,
I am running nut with megatec driver accessing ttyS0
as user nut on "standard" kernel (gentoo-sources). It
works fine.
However, I just built a hardened kernel on a new
gentoo machine and have no experience with it. NUT
(upsdrv) is failing because it says it doesn't have
permission to access ttyS0 even though nut is within
the appropriate group. I can add user = root in
ups.conf
2009 Sep 28
1
Data stale & Got disconnected by another driver: Device or resource busy
Good day all and sorry my English.
I have some problem when updating NUT. I have server with 4 UPS connected.
When I starting upsdrv and upsd and after sometime (1-2 minutes) I can't get
data from ups's
# upsc apc at localhost battery.type
Error: Data stale
and errors in /var/log/{syslog,debug,daemon.log}
usbhid-ups[2385]: Got disconnected by another driver: Device or resource busy
OS: