similar to: APC CS650/550 not turning load back on when power return

Hi all, I'm in the process of testing a new APC Back Ups CS-650, connected to a Debian Linux box via USB and being monitored with NUT v2.4 (installed via the package from Debian testing). When I remove power from the UPS (with a dummy load connected) then once the battery gets down to the appropriate level the PC it's connected to via USB shuts down, and tells the UPS to power down the

On Jan 7, 2015, at 6:11 PM, DatGingerCat <dat.ginger.cat at gmail.com> wrote: > Hello, > > I have decided to upgrade my home server by turning it into an ESXi host and have also added an APC CS650 UPS. > My plan was to have NUT version 2.6.4 running in a Debian 7.7.0 virtual machine, NUT installed using apt. > I configured NUT to run as a netserver, installed the ESXi nut

The serial number looks completely different, but the firmware seems to be the same. Pasting upsc output: battery.charge: 80 battery.charge.low: 10 battery.charge.warning: 50 battery.date: 2013/12/04 battery.mfr.date: 2013/12/04 battery.runtime: 1781 battery.runtime.low: 120 battery.temperature: 29.2 battery.type: PbAc battery.voltage: 13.5 battery.voltage.nominal: 12.0 device.mfr: American Power

Hello, I have decided to upgrade my home server by turning it into an ESXi host and have also added an APC CS650 UPS. My plan was to have NUT version 2.6.4 running in a Debian 7.7.0 virtual machine, NUT installed using apt. I configured NUT to run as a netserver, installed the ESXi nut .vib, configured the shutdowncmd in the VM to do nothing, so that the ESXi host would close that virtual machine

Hi all, I am trying to get a APC Back-UPS CS 500 running on my QNAP 419P Nas. Since on all my work I figure out the following: from Network UPS Tools upscmd 2.4.1 [~] # upscmd -l qnapups Instant commands supported on UPS [qnapups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use

We have about 4 servers connected to an APC UPS. The UPS only has one UPS connection. So my question is, in a power outage how do i get all my servers to safely shutdown? Do i run a USB hub? Do i write a script on the one machine connected to turn off all the other machines? I'm confused. Jamie

On Dec 16, 2014, at 9:45 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > Bye the way I just realize that I can't retrieve the ups.load, among other > thing :-( To the best of my knowledge, Microlink is not supported by any third-party tools (including NUT), but some variables are exposed via standard USB HID. Apparently, ups.load is not one of them. Your UPS might

Hi All, hoping someone might have some insights to what is going wrong with my NUT setup and my APC Back - UPS RS 1500 (specifically a BR1500GI) using the usbhid driver. https://download.schneider-electric.com/files?p_File_Name=AHUG-9JU4RH_R0_EN.pdf&p_Doc_Ref=SPD_AHUG-9JU4RH_EN&p_enDocType=User%20guide Main issue: NUT successfully shuts down my server when it goes on battery but when

Hi All, About a month ago APC announced they were including MODBUS protocol support in their new APC UPSes. The technical note on this is here: http://www.apcmedia.com/salestools/MPAO-98KJ7F/MPAO-98KJ7F_R0_EN.pdf "Application Note #176 Modbus Implementation in APC Smart-UPS" The APC "announcement" appeared on their site in their user blogs by an APC employee, here:

We got replacement battery "kits" for some of our APC UPS' (Smart-UPS, rackmount). I put them into one tray (it's for an RBC 43, which takes 8, and weighs a ton), and put it in, and let it charge. Idiot "change battery" led stays on. So I hit the test button, it discharges very rapidly (a good number of servers on this), and the led stays on. For some reason,

Hello Ted, 2013/9/11 Ted Mittelstaedt <tedm at mittelstaedt.us> > Hi All, > > About a month ago APC announced they were including MODBUS protocol > support in their new APC UPSes. The technical note on this is here: > > http://www.apcmedia.com/**salestools/MPAO-98KJ7F/MPAO-**98KJ7F_R0_EN.pdf<http://www.apcmedia.com/salestools/MPAO-98KJ7F/MPAO-98KJ7F_R0_EN.pdf>

Hi Roger, Thank you for your advise. I tried driver = apcupsd port = auto But unfortunately I get the same error message ?Failed to execute command ?upsc 'ups' 2>&1': Error: Driver not connected" As I am not very good in using OMV, maybe there is something else I should do? Thanks Best regards mikael festa The Studio, Cornfields, Portsmouth Road, Ripley, Surrey GU23

Gentlemen, I have done some experiments with an APC Back-UPS ES 650, to identify the currently specified items that are not available with this device, and to find out what non-standard items the device provides. Of the currently specified items, the following are not available: UPS.Battery.Temperature UPS.Output.PercentLoad UPS.PowerSummary.DelayBeforeShutdown UPS.Battery.Test

Hi there, I tried all the driver on the list for this UPS, but they don?t work. Could you help me please? INFO: OMV 2.2.14 (Stone burner) Debian Release 7.11 - Linux nas01 3.2.0-4-amd64 Debian 3.2.93-1 x86_64 GNU/Linux HPE ProLiant Gen8 G1610T 819185-421 4GB RAM MicroServer NUT 2.0 installed from the Plugin Panel of OMV APC Back-UPS 390 Watts / 700 VA, 230V, AVR, IEC Sockets Best regards mikael

Hi, I am trying to set up NUT on a mini-ITX system running OpenBSD 5.5. I have an APC Smart-UPS SC620 which runs perfectly well on Ubuntu, with nut-2.2.1. Ubuntu system uses ASUS motherboard. On mini-ITX system, I have Intel d2500cc motherboard with 4 serial ports. I've tested ports by connecting them with a null-modem cable and running cu in 2 terminals. Type in one terminal, output shows

Hello I recently switched from apcupsd to NUT2.2.2 without any troubles. I tried to figure out how I can configure the self-test intervall. The command upsrw lists only the variables battery.charge.low battery.runtime.low ups.delay.shutdown ups.delay.start The command usbhid-ups -D and the listing under http://obsvermes.org/cgi-bin/nut/upsstats.cgi?host=apcsmart at localhost&treemode

I had a look on the website, but I can?t see a detailed list of supported units. The model number is BX700UI. Best regards mikael festa The Studio, Cornfields, Portsmouth Road, Ripley, Surrey GU23 6ERt: +44 (0)1932 865 459 | e: mikael at treefrogdesign.tv <mailto:james at treefrogdesign.tv> | w: treefrogdesign.tv <http://www.treefrogdesign.tv/>This e-mail message may contain

Well, here's the tale: we got a "replacement kit" for some APC SmartUPS 3000 - rackmount UPSs. The "kit", costing about half of what APC is asking, is just the batteries, and you pull the tray out, open it up, and swap out the batteries. Except, I did this on one... and the replace battery light never went out. Not using apcupsd's apctest, not pushing the button. The

Apparently there is only an Itanium client for RHEL according to APC? I need to setup a few boxes to shut down safely and don't know if the PCNS 2.2.3 Linux version will do it? Anyone know why it needs Java as well? (Blegh) Assuming APC is fairly popular, how do you guys shutdown your CentOS boxes with a UPS with a management card in it? Thanks! jlc -------------- next part -------------- An

On Jul 9, 2013, at 9:04 AM, Gregor Burck wrote: > we bought two Smart-UPS X 1500 FW:UPS 09.1 / ID=20 [...] > I see there should be problems to get it work with a free daemon like nut, but are there some hints using it? > In my ups.conf I tried: > > [apc001] > driver = apcsmart > port = auto > desc = "Smart APC" Only the USB drivers should