similar to: Problem with monitoring

And sorry, I forgot to put log from messages, I always got this: Oct 30 21:06:25 optimus kernel: usb 5-1: usbfs: process 9808 (megatec_usb) did not claim interface 0 before use From: nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org [mailto:nut-tracker-bounces+vladimir=micovic.com at lists.alioth.debian.org] On Behalf Of Vladimir Micovic Sent: Saturday, October 30, 2010 8:00

Hello, I have Mustek Powermust 2000VA USB And installed latest nut. Problem is that I cannot get info from UPS: http://pastebin.com/BtpE2Be1 I got contact with UPS via blazer_usb driver http://pastebin.com/38BZteFC Ups.conf: http://pastebin.com/KwRrz5rf Upsd.conf: http://pastebin.com/i3jNHpVj Upsd.users: http://pastebin.com/TRJ5ahWR Lsusb: http://pastebin.com/WsEbkPqG Dmesg:

Hi, this is my first nut installation, i see lot of connection failure and when i tried the configuration removing the power chord from the ups i expected tha machine will power itslef down but this has not happened. I'm using nut 2.2.2-2 from debian lenny, ups is a mustek powermust 2000 with usb cable. All config files are root:nut and 640, i've had to add nut user to nut group

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

Hi, I'm trying to setup my Mustek 600 with USB (no serial ports on my computer) on Gentoo. The configuration I use is: [Mustek] driver = megatec_usb port = auto desc = "Power Mustek 600 USB" The NUT I use on my x86_64 machine is: sys-power/nut-2.4.3-r2 USE="bash-completion ssl usb xml -cgi -hal -snmp" When I start upsdrv I get: weasel ~ # /etc/init.d/upsdrv start

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hi Everyone, I am new to UPSs and Linux.? I purchased a Belkin F6C750-AVR UPS for our church.? We are?running CENTOS 5.2. I tried the Linux Power Management Software that came with Belkin UPS with NO success. I installed the NUT software. After some experimentation I received some success with the megatec_usb Nut driver: [root at server bin]# /sbin/megatec_usb -u root -a serverups -DDDD

Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS. I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <adrian.czerniak at becomo.com> wrote:

Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS. I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <adrian.czerniak at becomo.com> wrote:

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

Dears, I finally resolve my problem, I just make symbolic link: [test at box var/run/]# ln -s -T /var/state/ups/ nut Now I finally got services online: # /sbin/service ups start Starting UPS driver controller: [ OK ] Starting upsd: [ OK ] Starting UPS monitor (master): [ OK ] BUT, on upsc I

On Jan 2, 2012, at 10:51 AM, Vladimir Micovic wrote: >> Bus 003 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial > Unfortunately, this device ID is used by several different vendors. What does "lsusb -vvv -d 0665:5161" show? > Also, what OS and kernel are you using? (I thought certain kernels had USB-to-serial drivers for that chip.) > -- > Charles

Hello Tomasz, first, thanks for your feedback. > First of all, I want thank you for excellent NUT software :) It saved my ass > from BIG pain :) > > I want to confirm that NUT works with ActivePower UPSes (ActivePower is Polish > company). I have two machines: > > 1st machine: > * mainboard: Asus ATX with Intel Celeron 2.53 GHz, > * OS: openSUSE 10.1, > *

Hello. I recently upgraded from Ubuntu Maverick to Natty and hence upgraded nut from 2.4.3-1ubuntu5 to 2.6.0-1ubuntu3. My Sven PowerPro+ 1000 UPS ( http://en.sven.ru/catalog/ups/power_pro_plus_1000.htm ) worked fine with the previous version, using megatec_usb driver, but doesn't work with the current version, since megatec_usb is no longer available. Here is the output from blazer_usb.

Hi! I am trying to install subj, on my Bubba miniserver, that runs Debian. I am stoped now with driver test: upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - Megatec protocol driver 1.4 (2.0.4) Carlos Rodrigues (c) 2003-2006 Unable to open : No such file or directory Things to try: - Check 'port=' in ups.conf - Check owner/permissions of all

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Greetings Gentlemen, I have Mustek NetGuard 1000 UPS which is equivalent to Ippon SmartWinner 1000. I have tried to run several latest builds of NUT, but run megatec_usb driver still failed with my device. I hope the information below might help. Regards, Oleg Here is the information which may help: lsusb -v Bus 002 Device 002: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor:

On 2/27/07, Markus Layr <tuxian@yahoo.de> wrote: > do you now if there is a possibility to get an connection betwenn nut an > the Mustek PowerMust 2000VA via USB? > I tried if with newhidups but I always got "No matching HID UPS found". In the latest development version of NUT there's a new driver called "megatec_usb" that may support your UPS. If it

Hello all: I have a Yukai PowerMust 1000 USB and it used to work on another computer using megatec_usb driver. Now, I have it in a new computer, but the driver does not detect it. It is there: # lsusb|grep Cypress Bus 006 Device 007: ID 0665:5161 Cypress Semiconductor USB to Serial Permissions are OK: # ls -l /dev/bus/usb/006/007 crw-rw-r-- 1 root nut 189, 646 ago 8 01:51