similar to: Powerware 5115 USB Issue

Hi Arnaud, Any luck with the latest subversion trunk? From: Greg Sent: Wednesday, May 13, 2009 10:34 PM To: Greg ; Arnaud Quette Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Nut and PowerWare 5115 Hi Arnaud, Some more testing on Ubuntu 9.04. Here is the output of bcmxcp_usb and lsusb ============================================ root at

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001

Hi! all. I have been reading every mail and news about nut and 06da:0002 Phoenixtec but not found a solution. I have a very nice working ups from: CENER ref: "Active 1000VA 230V 12 CENER" and front logo "LA 900" It has COM3 and USB plugs, I don't know if it needs a standar RS232 I have test with varius drivers in ups.conf [MyUPS] driver = bcmxcp_usb | usbhid-ups |

On Dec 3, 2014, at 2:02 PM, janc at telefonica.net wrote: > USB error: error sending control message: Invalid or incomplete > multibyte or wide character This is a wild guess, but what about using the option "langid_fix=0x0409"? -- Charles Lepple clepple at gmail

Hello, I 'm trying to set up an Eaton PW5110 using nut-2.4.1 in OpenBSD, my ups.conf follows : [myups] driver = bcmxcp_usb port = auto desc = "Eaton PW 5110 (1500VA)" My first attempt to run upsdrvctl ended up complaining about unimplemented usb_clear_halt() in libusb. I patched libusb-0.1.12 with the following patch :

Hi Please could someone assist me? I?e got a 3g usb dongle - Huawei E1552. [root@]# lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:8407 Hewlett-Packard Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus

Hi I try since a week to run my MGE Protection Center under Suse Linux 9.3. At the MGE site i found an HowTo. I have installed NUT an create the=20 configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20= Anyone an Idea? Johannes Schatz=

Hello: I have a UPS model MXE II MAXIM brand online, 3500VA 2100W. Connects to the PC by a USB 2.0 port. I wanted to use nut, but this brand is not on the list of nut drivers. lsusb returns: ... Bus 003 Device 003: ID 06DA: 0201 Phoenixtec Power Co., Ltd ... I did not find this manufacturer in the driver list. Anyone know if you can have compatibility with other make and model of UPS. With

Following the instructions a following site I can not get nut to work with my UPS. http://bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups Hope that you can find out what is wrong by the provided info in the email Best Regards, Magnus Karlsson # lsusb -s 001:005 -v Bus 001 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS Device Descriptor: bLength

I've got some strange problem with NUT on my 5115 on Debian Etch: ---snip--- $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Things to try: -

Hi Charles. I have got this output with driver usbhid-ups ups.conf [Phoenixtec] driver = usbhid-ups vendorid = 06da productid = 0002 port = auto #~ langid_fix=0x0409 desc = "CENER ONLINE 1000VA" # export USB_DEBUG=5 # ./usbhid-ups -a Phoenixtec Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '3' 0.000557

Hi everyone, Been searching like crazy to find an answer to this. I have even read some of the source code but cannot figure this one out. I have installed nut 2.4.1 on my QNAP 409 Pro. (command: ipkg install nut) I have configured the ups.conf, upsd.conf and upsd.users. When i run "upsdrvctl start" I get the following error messages and output.

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

Hi Georg, > one question with regard to a Powerware 5115 UPS connected to a Debian 3.1 > Sarge box via USB: I downloaded and compiled nut 2.0.2 but I am unable to > configure the USB subsystem so that upsdrvctl recognizes the UPS. > > My /usr/local/ups/etc/ups.conf contains: > > [bla] > driver = bcmxcp > port = /dev/usbdev2.2 > desc = "bla bla

I am seeing some problems when using the Powerware 5115 UPS when connected to the Patsburg USB controller and would like to know if anyone has a solution. The symptom is that PING messages sent to the bcmxcp_usb driver take as long as 25 seconds to complete. The configuration is a Romley patform (a.k.a., Sandy Bridge + Patsburg) running Debian 6 with 2.6.39 kernel with NUT 2.6.4 in which the

Hi, I have a small home-use UPS for my home server from powerwalker (http://powerwalker.com/de/index.php?option=com_content&task=blogcategory&id=63&Itemid=106 sorry I only found a german version). It has a USB and a serial connector. lsusb lists it as "06da:0003 Phoenixtec Power Co., Ltd", in /proc/bus/usb/devices it sais "Manufacturer=OMRON" and

Nut for Windows 2.6.3-3 + Eaton/PW 5110 (103004256-5591). I had to manually install libusb driver and I'm using bcmxcp_usb. upsd.exe is reporting to me "Out of memory". It will run, but once anything connects to the daemon, it dies with that message. I don't have much experience with NUT yet so I'm not sure what the next course of action is. I do have NUT for Windows

Hi. I'm using ubuntu 10.04 and I'm in the process of buying a ups. This is it (eaton 5115 ups) with usb interface http://powerquality.eaton.com/05146561-5591.aspx?CX=3 I had a look at the ups compatibility chart here: http://www.networkupstools.org/stable-hcl.html But I can't find this particular ups listed. I plan to use NUT v. 2.4.3 that I can get from the

I tried switching to the USB version of bcmxcp_usb and get this error when I try starting up upsdrvctl or bcmxcp_usb like so: /etc/nut/bcmxcp_usb -DDDD -a powerware -u nut I used this for ups.conf: [powerware] driver = bcmxcp_usb port = auto With the serial/usb dongle, I used this successfully: [powerware] driver = bcmxcp port = /dev/ttyUSB0 What devices does

Good evening, I tried getting this to work a couple years back but didn't have enough time to do all the debugging that was needed (apologies to the devs who tried to help at that time). It's working much better now, but I'm still not able to get an answer from upsc. Can anyone help me work out why I'm getting the error when querying with upsc: Error: Data stale My