similar to: Eaton NV 1000H in nut's hardware compatibility list

Hi Sven, 2008/1/25, Sven Koch <haegar at sdinet.de>: > Package: nut > Version: 2.2.1-1 > Severity: normal > > I am using a Mustec PowerMust 1000 USB, connected with a USB cable to > the PC. > > With nut 2.2.0-2.1 everything works without problems - but since the > 2.2.1-1 update the "upsdrvctl start" from the init script just fails, > executing the

Hi to everybody. Some days ago, I bought an UPS by Forza Power Technologies, model SL-1001. This Forza SL-1001 is line-interactive, has 14,4 A/h charge and is rated at 1000VA. Before, I had a TrippLite Omni 500 (or something like that), a simple contact-closure UPS, and I used nut with the simple genericupsdriver, so I'm new with this type of UPSs. NUT doesn't list Forza as a

I heard about some inexpensive security cameras which get their power through the same cat5 cable which delivers the data/pictures (which would simplify wiring tremendously). Does anyone know about these? Do they work with Linux, particularly CentOS? tnx 4 tips.

Hi, I bought a Belkin Active Battery Backup UPS (http://www.belkin.com/uk/activebattery/) yesterday with a USB port and hoped it would work with nut. The device will show up in /proc/bus/usb/devices as a Cypress Semiconductor USB to Serial. It creates /dev/hiddev0 (and this disappears when the UPS is unplugged). I've tried using belkin, belkinunv, usbhid-ups and megatec_usb. I've tried

Hello. I've been experimenting with the USB connection of an Ippon BackComfoPro 800. This is the device "06da:0003 Phoenixtec Power Co., Ltd". The current SVN version of NUT does not work with this device. The megatec_usb driver can't get a proper reply to a Q1 request, failing with an error message about "short read (14 bytes)" instead. I have found the reason for

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

Hello, It looks like the nut-upsuser list is momentarily down. That's why I send it to nut-upsdev list too. I have recently bought a mustek Powermust 1000VA USB (sadly not the USB P version). I have done some tests with the latest nut 2.2.0 megatec and megatec_usb drivers. Here are my feedbacks. It works quite well but is extremely noisy in battery mode (and that is not the noise of the

An HTML attachment was scrubbed... URL: http://lists.xiph.org/pipermail/speex-dev/attachments/20110822/47e61254/attachment-0001.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: raffin.vcf Type: text/x-vcard Size: 266 bytes Desc: not available Url : http://lists.xiph.org/pipermail/speex-dev/attachments/20110822/47e61254/attachment-0001.vcf

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hi, it'd be great if you could update the documentation on the website that some models of the Belkin -UNV series will only work with the megatec(_usb) drivers. I wasted a lot of time on trying to get it to work with the wrong drivers, and would like to spare others the pain :-). Thanks, ~David P.S. Some forum post said that the stable megatec drivers don't work 100% with the belkin UPS,

Hello all! Some days ago we received new UPS?Powercom BNT-2000AP with USB interface to replace an old staff and I've spent four last days trying to connect it with NUT. I have a FreeBSD 8.4 box with NUT 2.7.2. # dmesg|grep -i powercom ugen0.3: <POWERCOM Co.,LTD> at usbus0 uhid0: <POWERCOM Co.,LTD HID UPS Battery, class 0/0, rev 1.10/0.01, addr 3> on usbus0 uhid0: <POWERCOM

I recently bought a Belkin F6H375 UPS. It connects to the computer via USB. Searching the Internet led me to believe that the megatec_usb driver in nut supports this UPS, however I've been unable to get it to work. I have this in ups.conf: [belkinusb] driver = megatec_usb port = auto desc = "Belkin USB" Here's what happens when I try to use it: ~ #

Hi Bj?rn, 2009/10/9 Bj?rn Torkelsson > Public bug reported: > > Binary package hint: nut > > I have recently upgraded from hardy to intrepid to jaunty. After > upgrading to Intrepid the megatec_usb stopped recognizing my Trust PW- > 4130M ups, it still does not work on Jaunty. It worked without any > problems in hardy. > > I tried the megatec_usb driver from hardy

Hello everyone, has anyone ever tried to make this device work with Linux and NUT? This is what udevadm monitor says: UEVENT[1215983089.652345] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1 (usb) UEVENT[1215983089.652427] add /class/usb_endpoint/usbdev1.4_ep00 (usb_endpoint) UEVENT[1215983089.657975] add /devices/pci0000:00/0000:00:0f.2/usb1/1-1/1-1:1.0 (usb) UDEV

Alexander Gordeev wrote: > Author: agordeev-guest > Date: Mon Aug 13 13:09:43 2007 > New Revision: 1049 > > Log: > drivers/megatec_usb.c: added credits to the banner message. Is this really needed/desirable? I think this kind of information needs to be put in the AUTHORS document. There are many more people on this list that put a lot of effort in NUT, without claiming credit

Dears, I finally resolve my problem, I just make symbolic link: [test at box var/run/]# ln -s -T /var/state/ups/ nut Now I finally got services online: # /sbin/service ups start Starting UPS driver controller: [ OK ] Starting upsd: [ OK ] Starting UPS monitor (master): [ OK ] BUT, on upsc I

2008/4/10, David Erosa <david.erosa at gmail.com>: > Public bug reported: > > Binary package hint: nut > > After updating to last nut package (2.2.1-2.1ubuntu6), the megatec_usb > driver seems to be working, except for the charge percentage: > > $ /lib/nut/megatec_usb -DDDDD -a SAI > ... > Checking device (0665/5161) (001/007) > - VendorID: 0665 >

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

I have an UPS, that claims to be IPPon Back Power Pro 700. I'm trying to connect it using USB. lsusb -v says: Bus 1 Device 3: ID 06da:0003 Phoenixtec Power Co., Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0

Hi Alexander, thanks for your good work on the megatec_usb driver. I have made a few more (cosmetic) changes. Is the driver now working stably for your device? In particular, do the instant commands (and particularly "upsdrvctl -k") work properly? In this case, we could hopefully mark the device as "supported" and merge the driver to the main branch. There is still the