similar to: Problem with APC SMART UPS 1000 (USB)

Hello, I have a memory problem when I run package WinBUGS with R (2.6.1). Until now I have been using a Pentium IV 3.2Ghz computer with 512Mb of RAM memory (with Windows XP Pro SP2), and I hadn't had any problem. Now I have a new computer with the following characteristics: Intel Core 2 duo 2.33Ghz and 3Gb of RAM memory (with Windows XP Pro SP2) and when I am running the same R syntax I

Howdy, I just did an "apt-get dist-upgrade" on my Debian unstable box, and noticed that the Asterisk version appears to be 1.0-1 in the unstable tree. I KNOW that 1.0 hasn't been released yet, so I am wondering who is responsible for the Debian packages? This will be VERY VERY confusing for people and it should be corrected ASAP. -rw-rw-r-- 1 1176 1176 1189696 Jun 7

Hi! I've tried the Fenton Driver for my UPS. The Powercom driver doesn't work. Here is the results: Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - Fenton UPS driver 1.21 (2.0.0) Unknown ups - please report this ID string: #PCM SMK-1000 2001 V9.0 Detected Unknown MK-1000 on /dev/ttyS0 Have you any ideas to make it compartible with NUT. Thanks! With

I'm trying to use a rackmount Smart-UPS from APC with the USB connector, and I'm running into some issues. They seem to stem from the fact that the Report Descriptor is much larger than any other UPS I've seen (61939 bytes). Here is the quick fix that I put in libusb.c after getting the HID descriptor, and before getting the Report descriptor, which seems to work okay:

Hi! I'm having problems connecting Ippon Smart power pro 1000 UPS to nut via usb under FreeBSD 7-stable The UPS uses megatec protocol and works fine via RS232 (UPS has RS232 and USB connectors) When I connect USB /dev/uhid0 is created. Tried port=/dev/uhid0 - doesn't work. Kernel rebuild w/o option uhid. On connect I get 2 devices /dev/ugen1, /dev/ugen1.1. Tried both of them.

I do have some of the more modern protocol documentation for Tripplite from the tripplite engineers, if someone is working on updating the Tripplite drivers. Their protocols are horrible. Thomas On Tue, Oct 10, 2017 at 1:37 AM, <tuharsky at misbb.sk> wrote: > Charles, maybe we are getting closer :-) > >> The tripplite_serial_protocol branch has some debug statements that

On Oct 10, 2017, at 1:37 AM, tuharsky at misbb.sk wrote: > > Charles, maybe we are getting closer :-) >> The tripplite_serial_protocol branch has some debug statements that will show up if you run "sudo drivers/tripplite -D -a name-of-ups" from the nut directory. > Network UPS Tools - Tripp-Lite SmartUPS driver 0.91 (2.7.4-432-gafd90f5a) > 0.000000 [D1] debug

[please use reply-all to keep the list CC'd, thanks!] On Oct 6, 2017, at 1:29 PM, tuharsky at misbb.sk wrote: > > Hello, > > I've got Tripplite Smart Int 1000 UPS with lan4.1 serial interface. Quite sympathetic UPS, I must say from first glance. I have made a proper serial cable (btw i hate all those constructor's decisions to make distinct serial wiring for each and

On Oct 8, 2017, at 4:34 PM, tuharsky at misbb.sk wrote: > > Thank You for You reply, Charles > > > D?a 07.10.2017 o 14:30 Charles Lepple nap?sal(a): >> Is the "lan4.1" cable different from this one? http://networkupstools.org/cables.html#_tripp_lite > > Yes, it is different. The correct cable for this interface version looks like this: >

Hi all, just installed the nut package from apt on Ubuntu. Here's what I got. Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 This APC device (051d:0003) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date version of NUT. If this does not fix the problem, try running the

My apologies, I forgot a step. See below. > On Oct 9, 2017, at 1:59 PM, tuharsky at misbb.sk wrote: > > Hi, Charles > > I'm trying compilation but there is no configure command in the cloned git directory of nut. > > > D?a 08.10.2017 o 23:47 Charles Lepple nap?sal(a): >> On Oct 8, 2017, at 4:34 PM, tuharsky at misbb.sk wrote: >>> Thank You for You

Have anybody expirience with Ippon Smart Winner 750/1000/1500/2000/3000 with serial interface ? I have tryed megatec and blazer_ser drivers with no success: [IPPON] driver = megatec port = /dev/ttyd0 desc = "IPPON smart winner 1500VA" model = "Smart Winner 750/1000/1500/2000/3000" # ./megatec -a IPPON -DDD Network UPS Tools - Megatec

Charles, maybe we are getting closer :-) > The tripplite_serial_protocol branch has some debug statements that will show up if you run "sudo drivers/tripplite -D -a name-of-ups" from the nut directory. Network UPS Tools - Tripp-Lite SmartUPS driver 0.91 (2.7.4-432-gafd90f5a) ?? 0.000000??? [D1] debug level is '1' ?? 0.177766??? [D1] W value = 0x86 ?? 0.177782??? [D1] L

Hi, I just noticed something interesting ... don''t know whether it''s relevant or not (two commands run in succession during a ''nightly'' run): $ iostat -xnz 6 [...] extended device statistics r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device 0.0 0.3 0.0 0.8 0.0 0.0 0.2 0.2 0 0 c2t0d0 2.2

Hi all! I have a nut 2.4.1 on FreeBSD 7.1 i386. UPS model is IPPON smart smart power pro 2000. When i try to see battery charge, in output it have not such variable, and i can't control other servers (Win2k3 + WinNUT) because they not knows about current battery charge. How i can solve that problem? Thanks! upsc IPPON at localhost:54672 --------------------------- battery.voltage: 27.50

Hello, I've got Tripplite Smart Int 1000 UPS with lan4.1 serial interface. Quite sympathetic UPS, I must say from first glance. I have made a proper serial cable (btw i hate all those constructor's decisions to make distinct serial wiring for each and every UPS type from each and every manufacturer!) I use [tripplite] driver for NUT and I can use upsc to get report from UPS, but

Dear R-helpers, I can not invoke maxent() in Mac OSX. Could you give me any directions on that? Thank you in advance. Here is my info: # (1) the error > me <- maxent(predictors, occtrain, factors='biome') me <- maxent(predictors, occtrain, factors='biome') Error in .jcall(mxe, "S", "fit", c("autorun", "-e", afn, "-o",

Thank You for You reply, Charles D?a 07.10.2017 o 14:30 Charles Lepple nap?sal(a): > Is the "lan4.1" cable different from this one? > http://networkupstools.org/cables.html#_tripp_lite Yes, it is different. The correct cable for this interface version looks like this: http://pinouts.ru/UPS/tripplite_smartpro_cable_pinout.shtml > Are you comfortable with rebuilding the

Hola a todos Estoy intentando extraer un subconjunto de datos de una serie temporal, concretamente quiero extraer los meses de verano de varios años pero no encuentro la manera. Los datos tienen este formato: FECHA;H_SOLAR;DIR_M;DIR_S;VEL_M;VEL_S;VEL_X;U;V;TEMP_M;HR;BAT;PRECIP;RAD;UVA;UVB;FOG;GRID;

Hi, Charles I'm trying compilation but there is no configure command in the cloned git directory of nut. D?a 08.10.2017 o 23:47 Charles Lepple nap?sal(a): > On Oct 8, 2017, at 4:34 PM, tuharsky at misbb.sk wrote: >> Thank You for You reply, Charles >> >> >> D?a 07.10.2017 o 14:30 Charles Lepple nap?sal(a): >>> Is the "lan4.1" cable different