similar to: megatec_usb vs Mustek NetGuard / Ippon SmartWinner problem

Hi all! Maybe possible adds something in megatec_usb driver for normal working with ippon 2000? This is output for drivers megatec_usb and blazer_usb: =========================================================== gate# /usr/local/libexec/nut/megatec_usb -DDDD -a IPPON Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '4' Checking

Hi. My Belkin UPS F6C1100-UNV works fine with megatec_usb version 1.6 (2.4.1). However, it doesn't work with 2.4.2 nor 2.4.3. # /lib/nut/megatec_usb_old -D -a belkin Network UPS Tools - Megatec protocol driver 1.6 (2.4.1) Serial-over-USB transport layer 0.10 debug level is '1' Starting UPS detection process... 0 out of 5 detection attempts failed (minimum failures: 2). Cancelling

Hello, We are using the equipment "MUSTEK PowerMust 3000 NetGuard RM". That is using Megatec protocol. But unfortunately not all the data can be viewed correctly when dumping from utility "upsc". For example: upsbox# upsc mustek at localhost battery.voltage: 108.00 battery.voltage.nominal: 96.0 driver.name: megatec driver.parameter.pollinterval: 2 driver.parameter.port:

Hello Ace, 2007/1/6, ace <ace@ezotop.ru>: > Hello Arnaud, > > Ippon driver with SmartWinner 1000: charge value fix > > nut-2.0.2:ippon.c:line 31: > -- bcharge = ((atof (batvlt) - 10.2) / 3.4) *100.0; > ++ bcharge = ((atof (batvlt) - 24.0) / 3.4) *100.0; > > sorry for no comments, i'm bad in english the ippon driver has just been removed from the nut trunk,

Hi, i recently bought an UPS from Integra Tech (http://www.integra-ups.com/eu/es/main.htm), the ePlus 450-850va model (http://www.integra-ups.com/eu/es/eplus1.htm), sorry i didn't find it in english, and i'd like to know if there will be support on this brand and model. When i reconnect it, i get this: [739610.568073] usb 1-1: USB disconnect, address 2

Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS. I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <adrian.czerniak at becomo.com> wrote:

Hi, I'm not the maintainter for the "megatec_usb" driver (in fact, I'm no longer maintainer for the base "megatec" either), so I don't really know the status for that particular UPS. I'm forwarding this to the NUT mailing-list though. Regards, -- Carlos Rodrigues On Fri, Dec 5, 2008 at 10:30 AM, Adrian Czerniak <adrian.czerniak at becomo.com> wrote:

I recently took over maintenance of a linux computer which is drawing power from a "Maruson Power Net 1500" UPS. However, there is currently no monitoring or control of the UPS by this (or any other) computer. Can nut control this device? There are serial, usb, and EPO connectors on the back of the unit. (There may be a manual but I'm going to have to hunt for it.) Thanks, David

Hello. I've been experimenting with the USB connection of an Ippon BackComfoPro 800. This is the device "06da:0003 Phoenixtec Power Co., Ltd". The current SVN version of NUT does not work with this device. The megatec_usb driver can't get a proper reply to a Q1 request, failing with an error message about "short read (14 bytes)" instead. I have found the reason for

Hi Heinz, 2010/5/30 heinz > Thank you for your nut-2.4.3 system. I had big troubles getting it to work > with the UPSONIC PROFFICE 650 UPS in USB mode. > > I had to rewrite the get_data_phoenix() function in drivers/megatec_usb.c > file. > It now appears to be working correctly. I have attached the source of the > modified function in case you might want to add it to a

Hi, I would like to report that Tuncmatik Newtech Pro 1 KVA (http://www.tuncmatik.com/en-US/productDetail.asp?RecID=290) works with nut(2.4.1) blazer_usb, blazer_ser and megatec drivers. The UPS came with an usb cable and a java based software for both linux and windows, named ViewPower (http://www-power-software-download.com). This UPS has double interface a USB interface and a serial

Dear R community, I have the following two zoo objects: MONTHLY CPI > plot(z) > par("usr") [1] 1977.76333 2011.15333 70.39856 227.03744 > z=zooreg(cpius$Value,as.yearmon("1979-11"),frequency=12) > str(z) ?zooreg? series from Nov 1979 to Oct 2010 Data: num [1:372] 76.2 77 77.8 78.5 79.5 80.3 81.1 82 82 82.6 ... Index: Class 'yearmon' num [1:372]

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

I've seen several posts over the past 2-3 weeks about memory issues. I've tried to carefully follow the suggestions, but remain baffled as to why I can't load data into R. I hope that in revisiting this issue that I don't exasperate the list. The setting: 1 gig RAM , Linux machine 10 Stata files of approximately 14megs each File contents appear at the end of this boorishly long

I've seen several posts over the past 2-3 weeks about memory issues. I've tried to carefully follow the suggestions, but remain baffled as to why I can't load data into R. I hope that in revisiting this issue that I don't exasperate the list. The setting: 1 gig RAM , Linux machine 10 Stata files of approximately 14megs each File contents appear at the end of this boorishly long

Lyonn CTB-1200 root at frambuesa:~# upsc lyonn at localhost battery.voltage: 27.20 battery.voltage.nominal: 24.0 beeper.status: enabled device.type: ups driver.name: blazer_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.internal: 0.03 input.current.nominal: 5.0 input.frequency: 49.9 input.frequency.nominal: 50 input.voltage: 213.3

Hello all, I'm trying to create a 2x2 matrix, 32 times after unlist() so that I can convert the list to matrix. I've looked through the R archive but couldn't find the answer. There is what I've done. > f <- system("ls *.txt", intern=TRUE) > x <- lapply(f, read.table) > x [[1]] V1 V2 1 -27.3 14.4 2 29.0 -38.1 [[2]] V1 V2 1 14.4

On 07/05/15, Gordon Messmer wrote: That's not the same as checking the media for corruption. You may be able to read all of the files, but if the data is corrupt, rpm may throw and IOError. So, the next thing to do is check your media. The DVD should offer to do that first when you boot from it. ------ Above quoted -------- Booted the DVD again, took the default. It got to 76.2% then

Hello all! Some days ago we received new UPS?Powercom BNT-2000AP with USB interface to replace an old staff and I've spent four last days trying to connect it with NUT. I have a FreeBSD 8.4 box with NUT 2.7.2. # dmesg|grep -i powercom ugen0.3: <POWERCOM Co.,LTD> at usbus0 uhid0: <POWERCOM Co.,LTD HID UPS Battery, class 0/0, rev 1.10/0.01, addr 3> on usbus0 uhid0: <POWERCOM