similar to: SOLA-330 2 Questions !!!

Hi To all on this list... I emailed the EATON (the company that has bought out SOLA) to request some information about the pin-out for this model UPS and I got a reply today! The answer is really simple! this model UPS just uses a normal serial cable that is pin 1-1 through to 9 -9 and I now have it work as it should via the megatec driver :) Scott Evans VK7HSE Phone: +61362291658 Mobile:

Hi All! I need to set up machine as slave which will act as? a master to some subordinate clients. The machine is question is a master node a parallel cluster which I want it to act as a master for the computing nodes but set itself as a slave with a master exclusively controlling the UPS elsewhere. Is this possible and how? --- Madhurjya ______________________________________ Physics

Hi to all... I've just upgraded my server to Jaunty, and the newer version of NUT 2.4.1 works a treat! Thanks to all involved :) Scott Evans VK7HSE Phone: +61362291658 Mobile: +61417586157 Skype: vk7hse scott at vk7hse.hobby-site.org http://www.vk7hse.hobby-site.org PGP/GPG Key ID 74639624 -- This email and any files transmitted with it are confidential and intended solely for the use of

Network UPS Tools version 2.4.1 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.4/nut-2.4.1.tar.gz - News: http://www.networkupstools.org/source/2.4/new-2.4.1.txt - ChangeLog: http://www.networkupstools.org/source/2.4/ChangeLog Arnaud and the NUT team -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops

I'd like to have the UPS status web page automatically refreshed. I've found a reference to using @REFRESH@ in the upsstats.html page, but as far as I can tell in looking at the code, somewhere I need to provide a value to the refreshdelay variable, and I see no way to do that other than changing the source code. I'm using nut 2.2.

Some one might have answerd this, but I can not find any think yet I am trying to load a SOLA 610 700va ups up and keep getting : --------------------------------- Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.88 (2.0.5) .Detected Pulsar ESV11+ on /dev/cuaa0 Network UPS Tools - Best UPS driver 1.03 (2.0.5) Unknown model detected - please

On Feb 26, 2014, at 2:10 AM, Victor Romero wrote: > I got a UPS Sola Basic but it is not working, I'm providing the details. I hope that someone can help me to get it working. > > Please let me know if there is some other information that I should provide :) Thank you for providing all of this information! > OS name and version > Ubuntu 12.04 > $ uname -a > Linux

I got a UPS Sola Basic but it is not working, I'm providing the details. I hope that someone can help me to get it working. Please let me know if there is some other information that I should provide :) OS name and version Ubuntu 12.04 $ uname -a Linux olimpo 3.8.0-29-generic #42~precise1-Ubuntu SMP Wed Aug 14 16:19:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Exact NUT version, 2.7.1

Hello again, I have a Sola 305 (aka Powerware 3110) here connected via a serial INT-0051 cable which I am trying to get working with nut. The driver.list file indicates that nut supports the Sola 305 when connected via the INT-0025C cable using the genericups driver with upstype set to 7 but it does not mention the INT-0051. I was able to use the "Basic CheckUPS II" utility provided

Hello people. My name is Rub?n. Firts, excuse me for my bad english. I run Debian 6.0.6, kernel 2.6.32-5-amd64 in my machine. I bought a ISB Sola basic UPS, model Micro SR inet, with usb conection. I Configure the nut.conf file in standalone mode and I install de isbmex driver. The ups.conf: [ISB_sola-basic] driver = isbmex port = auto With de command upsdrvctl start the

Hollo I'm new, My name is Ariel Arelovich I've encountered the following problem trying to sue metaflac. I used the following command: c:\Archivos de programa\FLAC>metaflac --set-tag-from-file="CUESHEET=sola.cue" so la.flac sola.flac: ERROR: file 'sola.cue' for 'CUESHEET' tag value has embedded NULs And I've got that error. See I have the flac that is

Hi Charles! Thanks a lot for your response. Now I figure why the isbmex driver was not working. On the other hand I've tried to run the command suggested. But no success. I got this information when running the dmesg command after running the modprobe $ sudo modprobe ftdi_sio vendor=0x0483 product=0x0035 [35816.111760] usbcore: registered new interface driver usbserial [35816.111792]

Dear R community, Please, can you help me with a problem concerning bootstrap. The data table called «RMika», contained times (Tps) and corresponding concentration of a chemical in a soil (SolA). I would like to get, by bootstraping, 10 estimations of the parameters C0 and k from the function: SolA = C0*exp(-k*Tps). # First, I fit the data and all is OK >

Hi, I am trying to bootstrap the difference between each parameters among two non linear regression (distributed loss model) as following: # data.frame > Raies[1:10,] Tps SolA Solb 1 0 32.97 35.92 2 0 32.01 31.35 3 1 21.73 22.03 4 1 23.73 18.53 5 2 19.68 18.28 6 2 18.56 16.79 7 3 18.79 15.61 8 3 17.60 13.43 9 4 14.83 12.76 10 4 17.33 14.91 etc... # non

HOla a todos soy novato en R. Lo que pasa es que tengo un conjunto de datos en una matriz y me gustaría saber , si es que el R tiene un comando en especial (para no tener que hacer el programa) para que dichos datos queden en una sola fila o columna. gracias. -- [[alternative HTML version deleted]]

Help please on Powerware 3105 serial (aka SOLA 305 here in Australia). Is it best configured as a contact-closure device or do I try and persist to get bcmxcp to work - which it won't so far? Running on SUSE 10.1 Thanks,

I've been trying to have Samba 3.0.1 work as a primary domain controller using LDAP as the authentication mechanism. However I am unable to get any of my Windows XP Pro machine join the domain. When prompt for an account with permissions to join the domain by the XP client, I give it the Administrator account which is granted Full access to the LDAP directory (BTW this is poor security,

Estimados Quisiera calcular las medias de cada semana de una sola vez con un script. Apreciaría su ayuda sem01 sem02 sem03 sem04 43 46 49 42 67 57 74 87 33 39 38 34 82 55 59 44 33 39 38 34 saludos José -- Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia

Un saludo a todos. Estoy haciendo un ACC y utilizo el paquete Ade4. Cuando quiero realizar un plot del resultado utilizo plot(). el resultado son 6 gráficos: loadings, correlation, inertia axes, scores and predictions, eigenvalues y species. Lo que quería saber es cómo representar en una sola ventana (los 6 gráficos a parecen en la misma) el gráfico correspondiente a Species. Gracias por vuestra

On Fri, Jan 2, 2015 at 7:31 PM, hyouko at gmail.com <hyouko at gmail.com> wrote: > Before I merge it (well.. provided that it works..), I'd like to know > a couple of things more: > 1. does the load.off command ('S00R0000') work? load.off works. > 2. does the 'C' command (mapped as shutdown.stop and load.on) turn the > load on if executed while the