Nut upsuser - Feb 2008 - Unknown model detected - please report this ID: 'SOLA'

Some one might have answerd this, but I can not find any think yet

I am trying to load a SOLA 610 700va ups up and keep getting :
---------------------------------
Network UPS Tools - UPS driver controller 2.0.5
Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.88 (2.0.5)
.Detected Pulsar ESV11+ on /dev/cuaa0
Network UPS Tools - Best UPS driver 1.03 (2.0.5)
Unknown model detected - please report this ID: 'SOLA'
Detected Unknown Unknown SOLA (SOLA) on /dev/cuaa1
Starting nut.
Network UPS Tools upsd 2.0.5
Connected to UPS [mge]: mge
Connected to UPS [sola]: sola

--------------------------------
The mge is on but I can not get the sola to work as it should

A copy of ups.conf bellow:
-----------------------------
[mge]
        driver = mge-utalk
        port = /dev/cuaa0

[sola]
        ID = SOLA (610)
        driver = bestups
        port = /dev/cuaa1

-----------------------------

I have tryed all types of setings but can not get it to work.

can some one help me PLEASE.

I Know you need to use a ID but there is nothing I can find to tell me
What to us


Regards

s.h
nutathaddow.info

> Some one might have answerd this, but I can not find any think yet
[...]
> I have tryed all types of setings but can not get it to work.
What type of settings have you tried?
> can some one help me PLEASE.
>
> I Know you need to use a ID but there is nothing I can find to tell me
> What to us
I'm pretty sure you didn't look at 'man 8 bestups' yet. It list
the ID
line for the Sola 610 (and the format of it) and even has an example of
what to put in it. The ID you're providing doesn't look even remotely to
what the format is, so I warrant a guess that you didn't read this. If
after reading the man page things are still not clear, don hesitate to
come back.

Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57

thanks Arjen

I found the Man page, have set it up, but still have some problems

this is a log of it :

--------------------------------
battery.charge: 100.0
battery.voltage: 2.27
battery.voltage.nominal: 0.0
driver.name: bestups
driver.parameter.ID:
610,700,240,240,0.0,0.0
driver.parameter.port: /dev/cuaa1
driver.version: 2.0.5
driver.version.internal: 1.03
input.frequency: 49.9
input.voltage: 246.1
output.voltage: 238.0
ups.load: 007
ups.mfr: Best Power
ups.model: 610 700
ups.status: OL
ups.temperature: 27.0
-------------------------------

The config file is :
-------------------------
[sola]
        ID = 610,700,240,240,0.0,0.0
        driver = bestups
        port = /dev/cuaa1

I had to put 0.0,0.0 to stop it from saying it was not charged.

But as you can see:
battery.charge: 100.0
battery.voltage: 2.27
battery.voltage.nominal: 0.0

"battery.voltage" should be alot higher,the win CheckUPSII Says it
should
be 27V not 2.27

if I change the last 2 in the ID to be what is ment to "20.0,27.4" i
get"
battery.charge: -239.6
battery.voltage: 2.27
battery.voltage.nominal: 27.4
....


Does any one know why it does this





regards


shane
nut