similar to: Upssched timers

Hello, I'm using nut with my MG Ellipse on serial port. No problem since one year. Two days ago, I wanted to add a phone alert through my asterisk box when power is down. Since then, upssched doesn't make his job anymore. here is the "syslog" I get when the power cord is unplugged : > > May 9 11:39:34 serveur upsmon[6411]: UPS ellipse@localhost on battery > May 9

hello, every two weeks my system shutsdown because my apc ups does a self test and nut is not picking up the cancel timer event. according to me all settings are correct. in my upssched-cmd script i execute a remote shutdown, because nut is running in a virtual machine and i want the script to shutdown all hosts in my esx environment. my upssched-cmd script ---- #!/bin/sh # !! COPY THIS

Hi, The exec is returning 126 - "Command invoked cannot execute. A permission or command not executable problem.". Are you sure that the script is executable by the user running NUT? Do you have SELinux enabled? Regards, Neil. On 27/04/15 20:55, James Hammond wrote: > Hi Roger, > > I get: > > Apr 27 20:50:05 unifi upsmon[1022]: UPS ups on battery > Apr 27

Hi, I want to test the events off my UPS. I define In upsmon.conf: RUN_AS_USER root NOTIFYCMD /sbin/upssched NOTIFYMSG ONLINE "UPS %s on line power" NOTIFYMSG ONBATT "UPS %s on battery" NOTIFYMSG LOWBATT "UPS %s battery is low" # NOTIFYMSG FSD "UPS %s: forced shutdown in progress" NOTIFYMSG COMMOK "Communications with UPS %s established"

Gents, Thanks, yes definitely a permissions problem. Roger pointed me in the correct direction with the command to add logging for the script. I have the shutdown working now but need to tighten up the permissions. Not too sure where to start with assigning the correct permissions. Cheers, James > Date: Mon, 27 Apr 2015 21:25:45 +0100 > From: neil at dana.org.uk > To: nut-upsuser at

I had upssched call the looping script, and background the process (via '&'). This seems to have resolved the problem, and eliminate the delay I was experiencing -Rob ________________________________ From: nut-upsuser-bounces@lists.alioth.debian.org [mailto:nut-upsuser-bounces@lists.alioth.debian.org] On Behalf Of Dege, Robert C. Sent: Thursday, July 21, 2005 11:04 AM To:

When the UPS starts to run on Battery, upsmon notifies upssched, and upssched runs an "onbatt script", which sends out an alert every 15 seconds via wall. When the UPS is put back on line, upsmon acknowledges this change (via WALL). However, upssched does not get notified properly, so the onbatt script continues to send alerts. About 45 seconds later, upssched acknowledges the UPS

Hi Roger, I get: Apr 27 20:50:05 unifi upsmon[1022]: UPS ups on batteryApr 27 20:50:05 unifi upssched[2688]: Timer daemon startedApr 27 20:50:06 unifi upssched[2688]: New timer: onbatt (20 seconds)Apr 27 20:50:26 unifi upssched[2688]: Event: onbattApr 27 20:50:26 unifi upssched[2688]: exec_cmd(/sbin/upssched-cmd.sh onbatt) returned 126Apr 27 20:50:41 unifi upssched[2688]: Timer queue empty,

Dear list, Can't make upssched notify me on event occured. OS: Debian, 2.6.26-1-amd64 Nut: 2.4.3-1.1squeeze1 UPS: Ippon Smart Winner 3000 connected via COM On event ( plug out the cord from UPS ) upsmon detect's status change to OB and gives WALL and syslog notify, but no script starting. In syslog no errors and no upssched process occured, just upsmon. There're no PIPE and LOCK

Hi all, I've not been able to find the answer to my timer problem in the faq or the archives. (or google) Basically, I can't get timers to fire. They fire ignoring the timer value, as if the timer was set to 0. I'm using the OpenFiler distribution, patched to the latest and greatest. upsmon 2.2.2 When I pull the power plug, I see the text "Im In Battery" instantly, instead

Hi, I have been running nut successfully for a long time with my Debian 11 server. I upgraded my server to Debian 12 today, which upgraded nut also from 2.7.4-13 to 2.8.0-7. I noticed that after upgrade there was a upssched process running and taking 100% cpu time. I checked if there were any changes to configuration file formats with nut upgrade and only differences I noticed were a terminology

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

Hi, I ran the strace command while upssched was 100% CPU hungry. This is what I got: 1686633611.702798 read(7, "", 1) = 0 <0.000004> 1686633611.702816 read(7, "", 1) = 0 <0.000004> 1686633611.702834 pselect6(11, [7 10], NULL, NULL, {tv_sec=1, tv_nsec=0}, NULL) = 1 (in [7], left {tv_sec=0, tv_nsec=999998800}) <0.000006> 1686633611.702862 read(7,

On 9/16/08 3:35 PM, "Arjen de Korte" <nut+users at de-korte.org> wrote: > Citeren tarbeite <tarbeite at fit.edu>: > >> Running opensuse 11 with two ups that can be seen via web interface and post >> messages on the console. > > Please post the contents of /etc/ups/upssched.conf here. Also make > sure that the directory mentioned in PIPEFN and

Hi everyone, Here I am with my second attempt to persuade upssched to do things; for some reasons it just won't! Or if it runs, it never runs the script. OK, the story first: 2.0.3 (conveniently comes as RPMs by default on FC6) running on FC6; APC Smart-UPS 750 via serial connection all working fine. Here are the main files: /etc/sysconfig/ups SERVER=yes MODEL=apcsmart DEVICE=/dev/ttyS0

Hi, the last commit to upssched.c (Merge Coverity branch, r3555) broke upssched with commands that have a second argument. If a command with a second argument is used, "enc" in line 697 is not an empty buffer and snprintfcat() just appends some stuff, i.e. the following command CANCEL onbatt online becomes onlineCANCEL "onbatt" "online" and is then sent to the

Hi, I have problem with upssched on windows. Upssched is not executed. I have 2 scripts, 1 for notification in upsmon and second for scheduling in upssched. Monitoring is working fine, script write to log. I'm using binary windows installer 2.6.5-6 from NUT. Here are my configs: --- nut.conf MODE=netclient --- upsmon.conf MONITOR ups_1000 at 192.168.3.95 1 <user> <password> slave

Bonjour je n?arrive pas ? configurer convenablement NUT pour qu?il m?adresse des SMS en cas de coupure de courant. C?est important pour moi car dans ma maison les coupures sont tr?s fr?quentes. Voici ma configuration : ****************************************************************** 1/ dans /etc/nut/upsmon.conf MONITOR eaton at localhost 1 admin motdepasse master MINSUPPLIES 1 SHUTDOWNCMD

Hi, I cant seem to get my upssched to get called by upsmon. Upsmon -c fsd just shuts down without the message I set or the one in upssched-cmd /etc/ups/upsmon.conf: MONITOR ups6 at localhost 1 <user> <pass> master MONITOR ups8 at localhost 1 <user> <pass> master SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD /usr/sbin/upssched NOTIFYMSG

Hi, I'm attempting to use the UPS network tools. I'm sure I got the configurations worked out as I get notified when the ups goes on battery and back online. I am having problems with upssched. I have the following in my upssched.conf: CMDSCRIPT /usr/local/ups/sbin/upssched-cmd AT ONBATT * EXECUTE onbatt The problem I have is that is seems like the script in CMDSCRIPT never gets