similar to: Tripplite OmniPlus1000LCD Problem on VIA system

Hello! First time posting to this list. I recently purchased a Tripp-Lite OMNIPLUS1000LCD from Costco (USA). I have it attached via USB to a Dell computer with Ubuntu 8.04 server (all updates on it). I've gone through a lot of research on google and this list and can't figure out why my UPS will not connect using nut/usbhid-ups. My setup in ups.conf is: ------- [OMNI1000LCD]

I'm running Ubuntu 5.10, featuring a patched kernel 2.6.12. I have a Tripp Lite SmartPro SLT ups connected via USB. I have cleanly compiled and installed the new nut 2.0.3. I do have the "extras", like libusb, installed too. I need some USB advice- that is, I'm not sure what a normal baseline should look like. At boot, the modules usb_core and uhci_hcd are loaded. dmesg

Hi, all. My name is Kenichiro Ochi, in Oracle Japan Support. Customer examines upgrading OCFS from 1.0.9-12 to 1.0.14-1. And customer asked us a question about the way of downgrading to 1.0.9-12. (customer presumes a case in case after the upgrade.) We tested the following... 0.After the upgrade 1.umount OCFS volume on all nodes 2.uninstall rpm (V1.0.14-1) # rpm -e ocfs-tools-1.0.10-1 # rpm

Hi, Experts. I'm Kenichiro Ochi, the support engineer of Oracle Japan. I would like to ask you the following questions about supported files on OCFS. I know OCFS VER 1.X only supports Oracle datafiles (including archive logfiles). My customer has one question. - Is it supported that archive logfiles on OCFS are compressed (using compress, gzip command etc) ? In other words, is it

Hi list- I'm having problems with TrippLite SMX1500LCD not being detected by NUT under FreeBSD 6.3-RC2. NUT 2.2.1 was installed from ports with the following options: WITH_USB=true WITH_SNMP=true WITHOUT_IPV6=true WITH_LIBUPSCLIENT=true WITH_CGI=true I use USB cable shipped with TrippLite and 'usbdevs -v' shows the following: ... Controller /dev/usb2: addr 1: full speed, self

Attached are config.log and usbhid-ups output with -u root (gzipped). Now driver output looks a lot like the one from port build. On Mon, Aug 20, 2018 at 1:42 PM, Charles Lepple <clepple at gmail.com> wrote: > On Aug 20, 2018, at 1:03 AM, Valentin Merkulov <schnobel at ickis.net> wrote: >> >> 0.033412 [D3] nut_usb_claim_interface: failed to claim USB >>

Hi All, I installed snv_b81 in my portable hard disk(capacity 160gb with 2 partitions, one for solaris and other for windows). When I tried to boot into dom0 from grub, I got the following errors and the system gets hanged. Warning : No SOF interrupts have been received, this USB EHCI host controller is unusable panic[cpu0]/thread=f502ae20:cannot mount root path /pci@0, 0/pci8086, 5641@1d,

Which command to run which will auto detect all hardwares present in the system ? OS : CentOS Running Asterisk -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090126/5e064cf8/attachment.htm

Hi, I am struggling to get rid of a conflict on DELL 2800 : PCI Parity error (EB113 on the display) I am learning linux and asterisk as I go along, there might be obvious things I should know, but bear with me. >From demsg below my 2 digium cards installed are listed (no config or connections done to digium cards yet), the conflict is with the TDM400P card, without that card, in any slot, no

Hi all, I have a Toshiba Tecra M9 and have not been able to boot it dom0. This is running SXDE 01/08, snv79b. After booting under kmdb and setting moddebug=80000000 before booting the Solaris kernel (with help from Dan Mick), I was able to see mac_ether as the last thing loading, right after loading the e1000g driver. I cannot drop into kmdb via F1-A after it hangs. I''ve also

All: I am having a devil of a time getting nut to work on freebsd. Here is what I have done. I am trying to load the drivers, and here is my ups.conf file: [tripplite] driver=trippliteesu port=auto When I dmesg on freebsd 7.1 for my usb device: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.00, addr 2> on uhub0 using the usbdevs -v command: Controller /dev/usb0: addr 1:

Hi, Im trying to compile kernel 3.0.4 inside Centos 5 DomU The steps I do are Make bzImage Make modules Make modules_install Depmod -a mkinitrd /boot/initrd.img-3.0.4 3.0.4 but them im getting this -bash-3.2# mkinitrd /boot/initrd.img-3.0.4 3.0.4 ls: /etc/modprobe.d/*.conf: No such file or directory No module ehci-hcd found for kernel 3.0.4, aborting. If I exclude the

Hi, I'm experiencing recently happend kernel panics while making bacula backups on my external USB harddisk. It first happened some days ago while I was running 6.4-PRERLEASE. I then updated to 6.4-STABLE and enabled all the kernel debugging stuff. I've uploaded "screenshots" (including backtrace) here: http://pics.pofo.de/gallery/v/misc/ I'm now not sure if the external

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

How does one do this? For example: # lspci | grep USB 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9

Hi all, Can anyone please advise the correct process for defining a USB device to point to a USB 2 Controller? Specifically, how do you define a USB device to use the EHCI controller in a guest xml file? To summarize my problem: I have 1 x USB1 device and 1 x USB2 device that I would like to use from within a Windows XP Guest. If I add the USB2 device (Avid M-box) to the guest machine via

Saw your post on -stable about this, and decided to take a look since I'm about to get my hands on a similar (82801DB) motherboard. If it's the USB 2.0 controller that's isn't being detected, shouldn't ehci by patched instead of uhci...? You may want to give the attached, completely untested, patch a try. I.e. it compiles on my box, but I don't have any hardware to

On Apr 3, 2014, at 3:40 PM, Adam Pribyl wrote: > I have nut 2.6.4-2.3+deb7u1 on debian 7 32bit, with UPS Eaton Nova AVR 1250 connected via USB. Which kernel version? > It happens several times a day that I get a message about > > Apr 3 16:41:49 kernel: [422581.049671] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -110 > Apr 3 16:41:54 kernel:

I am trying to use Syslinux as my boot loader for a stripped down version of Knoppix (DSL) on a USB Pen Drive. I followed the instructions verbatim on http://rz-obrian.rz.uni-karlsruhe.de/knoppix-usb/knoppix-usb.html, but no luck. The system will start to boot to the USB, but gives a Kernel Panic. I will give all information that shows on the screen. After I select Boot from USB (which on my

I'm running FreeBSD 7.1-PRERELEASE over Asus P5Q motherboard. Such board comes with an nic requiring age0 driver. When the nic is under load, such trasferring big amount of data over gigabit connection (let's say some gigabyte backups), the computer hangs, sometimes with panic, sometimes freezing. Before that i was using an Intel nic with em0 driver and 7.0-Stable#2.. and that