similar to: Liebert ITON 600 VA

Hello, I have a Liebert UPSTation GXT UPS and i'm trying to get it to work with NUT(using a Multilink serial cable) but without any success so far. I am aware about the liebert contact-closure driver but this does not suit my needs as I need to get detailed status on the ups (voltage levels, temperature, load, etc.) I have tried every driver that ships with NUT 2.0.5 with no result.

Hi, I saw your email here http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-October/000243.html about the Liebert UPS protocol and I was wondering if it actually got in the NUT tree? I had a look in the 2.2.2 tree but I can only find the closed contact stuff :( -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing

This patch adds support for the following ups to liebert-hid.c: $ lsusb | grep Liebert Bus 007 Device 005: ID 10af:0001 Liebert Corp. PowerSure PSA UPS Using this patch, I'm able to obtain information about the ups via upsc: $ upsc upsname battery.charge: 100 battery.runtime: 1012 battery.type: PbAc battery.voltage: 1172 battery.voltage.nominal: 12 driver.name: usbhid-ups

Hello. I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS And this UPS detected only with this section in ups.conf: [liebert] driver = liebert port = /dev/ttyS0 but only this variables available: device.mfr: Liebert device.model: MultiLink device.type: ups

On Aug 19, 2013, at 12:58 PM, Korviakov Andrey wrote: > I have Liebert GXT3 UPS connected to CentOS Linux with kernel 2.6.32-131.0.15.el6.x86_64 and nut version 2.6.5-2. > lsusb: Bus 002 Device 003: ID 10af:0000 Liebert Corp. UPS > > And this UPS detected only with this section in ups.conf: > > [liebert] > driver = liebert > port = /dev/ttyS0 I am confused.

Hi Guys! I'm back and work on this driver again. First, I checked out the HEAD rev and tried the liebert driver. it gave wrong model,firmware,serial, mfr date value. caused by len variable in line 97 and after I use my ups with usb -> serial converter. these patches attached Did you try the liebert-esp2 driver in ON Battery mode ? Because If I switch my ups on battery (plugged off the

Hello, I was able to get the Vertiv/Liebert UPS (Vertiv Liebert PSA5 1500VA 900W - PSA5-1500MT120) to start working with NUT and "usbhid" driver, but would appreciate help to get it to work properly. Here's the output from the "upsc" command for a Cyberpower UPS I have: battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 20 battery.mfr.date: CPS

Hello, we have a Emerson Liebert GXT4, that we like to connect to our servers to shut them down if there is a power failure (which happens quite often in our area). I couldn't get the GXT4 working with usbhid-ups driver. So I need some advise to continue to get this device working. The GXT3 seems to be working ok with NUT (http://networkupstools.org/ddl/Liebert/GXT3.html). Here is my

Hi all, I?ve a UPS Liebert GXT3 500-3000VA with USB port. I?ve install NUT version 2.2.2 from repository packages for Debian Lenny. Linux kernel 2.6.26 I?ve try to use usbhid-ups driver in ups.conf [liebert] driver=usbhid-ups port=/dev/usb/hiddev0 Debian get the usb: # lsusb -v Bus 001 Device 002: ID 10af:0008 Liebert Corp. PowerSure Interactive UPS Device Descriptor: bLength

Bruce Pleat via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> writes: > Here's the (far less lengthy) output for the Vertiv Liebert: > > device.mfr: Vertiv Co > device.model: Liebert PSA5 > device.serial: 22223106602D04C > device.type: ups > driver.name: usbhid-ups > driver.parameter.pollfreq: 30 > driver.parameter.pollinterval: 2 >

Hi! My Liebert Power Sure PSPXT 450 with standard driver doesn't works, so I've done this modification and now it's works. # diff liebert_MY.c liebert.c 178 < ser_set_speed(upsfd, device_path, B9600); --- That is, I've only setup the port's speed. Can you update SVN code? Thanks Bye Beppe Ursino -------------- next part -------------- An HTML attachment was

On Oct 29, 2014, at 5:08 PM, Marcelo Fernandez <marcelo.fidel.fernandez at gmail.com> wrote: > Hi, > > I've bought a Liebert GXT3 UPS and I'm trying to use it with nut. I'm > using Ubuntu 14.04, but I'm having troubles (similar to this thread > [1]) using the standard "nut" package from the Ubuntu repositories. > > After some more searching,

Hi On 10/02/2014 02:39 PM, Charles Lepple wrote:> On Oct 1, 2014, at 9:03 PM, paul.chavent at fnac.net wrote: > >>> It should run as user "nut" in Debian. You may want to reinstall the nut-server package, and check the post-inst error messages to make sure that the "nut" user is created, and that it is in the "nut" group as well. >> >> The

based on r2432, i took this with "svn diff --revision HEAD liebert-esp2.c" fixes: 1) new way to initialize model, firmware etc. variables, the strok way failed because some vars had spaces. (e.g. model "Liebert NX") 2) new multipliers for: frequency, nominal power. I get correct readings now, before I had 500 Hz, and 200VA and now it's ok for me. Test with your models. 3)

Good morning, I just had the chance this morning to get my linux box tied into our network and talking to the UPS. I can now confirm that in NUT v2.4.3 snmp-ups (ietf) works with the Liebert Intellislot Web Card for the GXT2 family of UPS'. upsc output: tux ~ # upsc workups at localhost battery.charge: 100.00 battery.runtime: 2760.00 battery.runtime.low: 5 battery.voltage: 54.60 device.mfr:

Good morning, I just had the chance this morning to get my linux box tied into our network and talking to the UPS. I can now confirm that in NUT v2.4.3 snmp-ups (ietf) works with the Liebert Intellislot Web Card for the GXT2 family of UPS'. upsc output: tux ~ # upsc workups at localhost battery.charge: 100.00 battery.runtime: 2760.00 battery.runtime.low: 5 battery.voltage: 54.60 device.mfr:

Hi, I've bought a Liebert GXT3 UPS and I'm trying to use it with nut. I'm using Ubuntu 14.04, but I'm having troubles (similar to this thread [1]) using the standard "nut" package from the Ubuntu repositories. After some more searching, I've found this very recent thread in this list ("Return on experience with an Emerson/Liebert GXT3" [2]), and from my

I see there has been some Liebert work here recently. I have a Liebert UPS that has no USB, just RS-232. I reverse engineered the ESP-II protocol, at least as far as normal MultiLink monitoring goes, which was pretty simple. The protocol provides a table of parameter types and index ranges. So, I can read and (if I dare) write the parameter tables. We might be able to share info between

Hi, I have a Liebert PowerSure Personal XT that I have connected via its USB interface. lsusb shows that it is there and when I plugged in I got the kernel messages: Jul 3 11:25:37 mint kernel: usb 2-2.2: new low speed USB device using address 4 Jul 3 11:25:38 mint kernel: hiddev96: USB HID v1.11 Device [LIEBERT PowerSure Personal XT] on usb-0000:00:10.0-2.2 The documentation suggests that

Hi, Back in 2011, it was reported that Liebert PSA devices persist in reporting OB (On Battery) when using usbhid-ups regardless of the actual state. Pier Paolo did some work (2011) which reportedly solved the issue. However, that doesn't seem to have reached mainstream and I now face the same problem. I'm using NUT 2.6.3 with a new Liebert PSA 1500Va that only ever reports OB and