similar to: Page() bumps user out of a call

Hello, I am struggling to have a SPA504G to auto answer (for intercom/paging). I have tried the following SIP headers (not all together), but without luck: SIPAddHeader(Call-Info:\;answer-after=0); SIPAddHeader(Call-Info: answer-after=0); SIPAddHeader(Alert-Info: info=intercom); SIPAddHeader(Alert-Info: Ring Answer); SIPAddHeader(P-Auto-Answer: normal); Any other ideas? Leandro PS I have set

I am trying to get one of the function keys on the Snom 200 working as an intercom. However, I can't get the other Snom 200 phone to auto-answer. I found some posts in the archives from Christian that talk about intercom=true and also the Call-Info header. However, I can't get either one to work. I have tried firmware 2.04g,2.04h,2.05f,3.33 and none work. I am using chan_sip2z.c and

Ok so I added to my Freepbx config running Asterisk 1.2.4 in extensions_custom.conf ; intercom exten => _7XXX,1,SIPAddHeader(Alert-Info: Auto Answer) exten => _7XXX,2,Dial(SIP/${EXTEN:1},12,Tt) and configured my Polycoms via this page http://www.voip-info.org/wiki/view/Polycom+auto-answer+config for auto answer and that works fine if I dial 7 then the 3 digit extension. No

Hi, I'm testing paging using snom 360. Can someone correct my dialplan? Regards, Jason. ================================================== ;exten => _99XXXX,1,SIPAddHeader(Call-Info: Answer-After=0) ;exten => _99XXXX,n,SIPAddHeader(Call-Info: <sip:192.168.1.113>\;answer-after=0) ;exten => _99XXXX,n,Dial(SIP/${EXTEN:2}) exten => _99XXXX,1,Set(__SIPADDHEADER=Call-Info:

I was trying to get my polycom phone to auto answer. I added this to the dialplan. Used a different phone to call "22" and the phone rang it did not auto answer. Did I miss something? exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0) exten => 22,n,SipAddHeader(Alert-Info: Ring Answer) exten => 22,n,Set(__SIPADDHEADER=Call-Info:\;answer-after=0) exten =>

I am trying to page my Grandstream GXP-2000 phones and keep getting the error message: Jan 27 12:55:04 WARNING[30401]: app_page.c:183 page_exec: Incomplete destination '' supplied. How can I fix this error? The two contexts below do either one-way paging or two-way paging to all Grandstream phones in a list. [One_Way_Page_GROUP] ; one to many page exten =>

Sipura has implemented auto-answer in version 0.9.5 of the SPA-841 firmware. However, it is implemented via the Call-Info header, which Asterisk stable doesn't currently support. The attached patch implments a quick hack to support the Call-Info header from the Dial() application by way of setting the CALL_INFO variable. For example, the following macro can be used to dial up a single

Hello list, this works : exten => _*XXX*,n,SIPAddHeader("Call-Info:\; answer-after=0") exten => _*XXX*,n,Dial(SIP/${SIPACCOUNT}) The phone auto-answers the call... this does not work : exten => _*XXX*,n,SIPAddHeader("Call-Info:\; answer-after=0") exten => _*XXX*,n,Page(SIP/${SIPACCOUNT}) The phone rings and does not auto-answer the call... Can you tell me

I came up with this a few days ago, mostly used the wiki examples, didn't have time to post on the wiki yet, maybe one of you guys with a few minutes can throw it up there, really, I forgot my logon. http://www.voip-info.org/wiki/index.php?page=Asterisk+Paging+and+Intercom The agi script didn't work for me, wouldn't call the active hint extensions, even though they were there, no

Hi, When implementing click2dial feature, I can trigger an Aastra phone to auto-answer using statement like : SIPAddHeader(Alert-Info: info=alert-autoanswer); This is very convenient when trying to reach a distant party (ie through PSTN) The trouble is when 2 Aastra are calling each other over the LAN, this single statement is memorized somehow and both phones (caller and callee) auto-answer.

Hello, I hope this isn't too off topic, but I'm attempting to set up a Spectralink 8002 Wifi phone with our Asterisk installation, and seem to be running into a brick well (more of a wall than others that have posted their experiences). My problem is that the phone boots, associates with the wireless, grabs an IP (tried static too - same thing), contacts the TFTP server for firmware, then

We run a Hosting farm behind a bridge/iptables firewall setup running Gentoo with kernel 2.4.20-gentoo-r6, connected to a dual 15Mbps international internet pipe / , as this: Net Pipe --------- eth1 Bridge/Firewall eth0 -------- Internal Hosting Network lately we have been looking at htb to somehow control excessive usage from the users behind, but in our implementation there seems to be an

Here is another log from the * server CLI, I reall hope some one can help me out on this one. thanks |SELECT count(*) FROM vicidial_auto_calls where status = 'LIVE' and server_ip='127.0.0.1' and campaign_id = '' and call_time < "" and lead_id != '';| -- VDAD get agent: |0|update of vla table: |127.0.0.1 |UPDATE vicidial_live_agents set

Hello, Is there any reason why an IP-phone would pounder on port 5060 ? My firewall blocks the public IP because it thinks the remote IP is port scanning on port 5060. I think the phone is just registering but for some reason it does this repeatedly in a very short time. Oct 28 09:01:48 astserver kernel: Firewall: *UDP_IN Blocked* IN=eth0 OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:00:00

Hi, I just moved many Polycom phones from firmware v3 to 4.0.1b. Anto-Answer simply stopped functioning. I can downgrade and make it work, upgrading kills it again. There obviously is a difference in how the newer firmware is treating this auto answer sip header. Can anybody tell me if they have Polycom firmware 4.x.x working with auto-answer/paging? Just so I know it's worth my time

Hey all, Has anyone had any issues with phones having multiple lines that are in different contexts? We've got a couple phones that we're testing intercom functionality for, and I'm noticing that for some strange reason, no matter what line we use, the phones tend to be completely in one context or another, not segregated like I would expect. Our contexts look like this: context

All other phones we work with will auto-answer when we do this: [macro-paging1way] exten => s,1,SIPAddHeader(Call-Info: answer-after=0) exten => s,n,Page(${PAGINGLIST}) exten => s,n, Hangup The SPA phones simply ring. I have verified that Auto Answer Page is set to yes (the default). We've tried a variety of firmware versions and phone ages, going back to an old 942 and new 504s.

I want to implement a one way announcement and paging facility using Asterisk and Sipura phones. The wiki says Sipura phones only support Auto Answer using the Call-Info header which is no lone shipped with asterisk stable since 1.0.4. I would like to ask if anyone has implemented a similiar facility using Sipura SPA-841 or any other SIP phones. If I could take a look at how

Hi all, I have had (what I consider) an odd request. The installation I'm working on now is an office on a multi-floor building. They 're looking for some kind of solution with the phone system to provide door control. We are a non-profit so of course I'm looking for something VERY inexpensive. I'm sure /someone/ has done something like this. I'd appreciate any ideas. Cassius

Todd How do you have the context in the phones sip configs set? Bryant From: "Todd Reese" treese65 at gmail.com Hi all, I've been have problems with getting this system on line and would like to acquire some help with the extensions.conf. My current problem is that the phones won't dialout.on the VOIP lines listed as dialout1, dialout2, dialout3. This version of asterisk