similar to: Trying out a new version with sangoma card

I am having some difficulty getting a T100P card to work with my PRI. When I attempt to make an outbound call via: exten => 1004,1,Dial(Zap/g1/NPANXXXXXX) I see the following on the asterisk console: -- Executing Dial("SIP/sbruton-b8ce", "Zap/g1/NPANXXXXXX") in new stack Apr 21 08:18:48 NOTICE[16401]: app_dial.c:554 dial_exec: Unable to create channel of type

We fairly recently switched service providers for our 4 PRI circuits. Since that time, we started to notice some failed inbound calls. These calls terminate with an ISDN cause code 47 'resource unavailble'. Most of the time I see this error on the first or second channel on the second span in a trunk group (This is the providers trunk group for hunting, not an Asterisk trunk group). All

I have a system that I am trying to get a port on a Sangoma A104d card connected to an Adtran 850 with 5 FXS modules and 1 FXO module. A problem I am having is figuring out what cable should be used from the port on the Sangoma to the JP2 port on the Adtran. Tried was a cross-over T1 (1->4, 2->5, 4->1, 5->2) as well as a straight T1 (1->1, 2->2, 4->4, 5->5). Neither one

Hello I have a setup where i have 2 asterisk servers connected over the public internet with plenty of bandwidth, NAT on one side only. If i use IAX between the two *'s dtmf is flawless. If I use SIP, DTMF detection is around 30% or less. I have an exten to dial into and check DTMF: exten => NPANXXxxxx,1,Answer(); (actual number blanked for privacy) exten =>

Hello List! I wanted to share to everyone the following compatible connectivity products that my company installed in our Asterisk based soft switch. I already sent these to the Asterisk.org site many days ago but for some reason they still have to post it. 1. Sangoma A101 single port E1/T1/PRI Card 2. Sangoma A102 dual port E1/T1/PRI Card 3. Sangoma A104 quad port E1/T1/PRI Card 4. Sangoma

Hi all, My problem boils down to these errors: ... Unable to create channel of type 'ZAP' (cause 34 - Circuit/channel congestion) == Everyone is busy/congested at this time This is triggered by lines in extentions.conf such as: exten => _X.,1,Dial(ZAP/g1/${EXTEN},,W) The system is CentOS v5.2 with Asterisk 1.4.23 (druid-asterisk-1.4.23.1-2), a Sangoma A104

Is there a way to inject sound from a sound file into an established call using AMI? I have an established call from which I can record either or both legs. I can additionally "spy" on the call. Is there any way I can play a sound file into the call and not loose the ability for the people to continue talking while listening to the sound file? -- Jim Dickenson mailto:dickenson at

Hi all ! We currently have an asterisk box that is rather old (runs Asterisk 1.4.21.2), and it's connected to the PSTN with a sangoma A104d card. Now we have a new PRI at another location, and I use that occasion to build 2 new servers, one to replace our aging one and a new one for this new pri. So I downloaded the lastest libpri / asterisk / wanpipe driver, but the previous version of

In one of my center , its not taking root password. Anyways to recover it ? In other terms , I lost the control of server. Any solution or re-installation is the only way left ? I am using CentOS. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090122/ef95ad6e/attachment.htm

Hi All, pl help me with this basic question. I have a users (soft clients) with usernames having Alphabetics. I want to use Asterisk as my server. How should I have the dial plans as there are no numbers involved . so How can I make the configuration to work ( with numbers I can get this done using extensions.conf) my expected result is : alice at pbx.com should be able to call bob at

Jim, and all: Thanks for the response. If I can repeat what you are saying: you don't have to define the multiple lines in sip.conf? For comparison, with my current esi setup, we have 10 outgoing lines. If one line is busy, then the service just rolls to the next number. This is set up with the phone service. That doesn't have to done with outgoing sip lines? Does the dialstatus

Dear all, Anyone of you knows how to play an audio file at the beginning of a call for both Caller and Callee? A(x) of Dial application only plays audio for callee. I don't want to use MeetMe because I want to use Monitor and MixMonitor. Thank you! ________________________________ Este mensaje se dirige exclusivamente a su destinatario. Puede consultar nuestra pol?tica de env?o y recepci?n

if i run let's say 1 pbx running on my main linux box and a another on my windows box if a person dial my main number and press lets say 1 are it possible to transfer the call over to my other pbx hope anyone understand -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Recommending to go Digium because of an OpenBSD issue with the Sangoma A104D is quite funny to say the least since neither is the TE407P supported in BSD by Digium. So the recommendation is useless to the person who originally requested for a comparison between the two products. If someone wanted to send back the A104D, he could have taken advantage of Sangoma's 30 day money back

asterisk 1.4.32 have zapata.conf soft link to chan_dahdi.conf to use flash operator panel < 2.0 (from extensions.conf) exten=> 304,1,ChanSpy(Zap/4|q) exten=> 304,2,hangup There is no entry ChanSpy(Zap/41) in extensions.conf On dialing 304 and Zap/41 is in use this happens: [Jul 1 18:24:47] VERBOSE[14447] logger.c: -- Executing [304 at flash:1] ChanSpy("Zap/31-1",

Hi! I try to load an module that it is found in curent /lib/modules/`uname -r` tree ... root at sevcenco: ~ # ls -l /lib/modules/`uname -r`/kernel/drivers/crypto/padlock-* -rwxr--r-- 1 root root 14296 Mar 16 19:37 /lib/modules/2.6.38-0.el5.elrepo/kernel/drivers/crypto/padlock-aes.ko -rwxr--r-- 1 root root 10808 Mar 16 19:37 /lib/modules/2.6.38-0.el5.elrepo/kernel/drivers/crypto/padlock-sha.ko

We have a client that currently has a Microsoft Lync setup. I must admit I know nothing about this setup. What we would like to be able to do is allow the phones on desks connected to this server the ability to dial something that would allow the phone to access an asterisk box to be able to do an agent login over their LAN. Is there any way to do this? Can the Lync server have a SIP trunk to

Hi, I am facing an audio-problem with the dial application and I (!) think, that it is connected to the dahdi parameter "overlapdial=yes". Sangoma support does not see any connection between this. But when enabling this option I face with some(!) dial-partners a audio one-way issue (the called party can not be heard). Only using PSTNS (germany e1 trunk) - no voip. Is there any

Does Asterisk, currently using version 1.4, get any more information about the result of an outbound call made over a PRI line compared to a call via a SIP trunk? As an example, in a PRI call there is this message that shows up on the console: [2011-01-05 14:59:02] -- Channel 23 detected a CED tone from the network. for a call to a fax machine. Does asterisk set anything that a dialplan can

Hi all, Now i want to check a number (channel) online, offline or unreachable on asterisk but i don`t know to do. Can anyone help me to solve this issue. Thanks and best regard! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110109/c193b48d/attachment.html>