similar to: anybody out there sucessfully using gnugk?

Hello all, I have seen some people asking how to configure asterisk to work with h323 but i did not manage to do fix it yet (i am not an asterisk expert). Can someone help me configuring asterisk? It is already compiled asterisk 1.4.5 with H323 support. Everything looks fine. Then i understand i need to configure several files: -sip.conf -ooh323.conf -extensions.conf do i also need to configure

Greetings to All, I hope someone has already gotten this working. I spent all day today trying to get ooh323 and gnugk to run on the same box. After a lot of tweaking to get everything compiled, I got both up and running. I can make calls IAX to H323, but cannot make calls in the reverse direction. I have tried many different configs on the GK, but always come up with the same error. It appears

I am having a slight issue. I am trying to register 2 asterisk boxes with GNUGK and when I try to add the 2nd it gets denied cause of it saying its a duplicate. How do I change the configs to allow more than one asterisk box register to the same GK? brian This email was scanned by: Mcafee GroupShield ---------------- CONFIDENTIAL DISCLAMER ---------------- All information provided in this

Hello folks. We are trying to interconnect an asterisk installation with a gnugk 2.0.5 installation to become able to use some H323 hardware that needs a gatekeeper (particulary an Ericsson WebSwitch 100). We have managed asterisk to dial H323 endpoints successfully (although calls are interrupted immediately after connection with "spawn extension exited non-zero"), but we could not

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

Hi, I also had some problems using chan_oh323 together with gnugk. * <-> gnugk <-> h323-phone When I called the phone and hang up, befor the phone was picked up, the h323-phone continued ringing. The same, when the h323- and some sip-phones were called, and the sip-phone picked up the call first. (It is annoying, when you are talking to someone at the phone and the phone on the

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

Hi, I use with asterisk gnugk a gatekeeper for h323 client. I don't understand why asterisk can't have the H323-ID (callerID). In the gatekeeper's monitor I have this H323-ID but not in asterisk. Does anyone know something about it, or how can I send a caller ID to asterisk ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm using asterisk with chan_h323 together with gnugk. chan_h323 and gnugk were recently compiled with pwlib-1.5.2 and openh323-1.12.2 as advised. When connecting asterisk directly by ohphone (without gatekeeper), everthing is fine. When using gnugk for usage control in routed mode, I find a funny situation in asterisk's H.323 debug: == New H.323 Connection created. --

Hi, I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also. But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

OOH323 Debugging Enabled -- Executing Answer("SIP/3513-090f7d40", "") in new stack -- Executing Wait("SIP/3513-090f7d40", "1") in new stack -- Executing DeadAGI("SIP/3513-090f7d40", "a2billing.php|1") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php a2billing.php|1: line:58 - IDCONFIG : 1

I've successfully got inbound/outbound calling working with our Asterisk using the Asterisk-OH323 channel driver. We are using a parent gatekeeper and the NuFone H323 channel driver would not work with the parent gatekeeper... I'm trying to determine a way to ensure that the line used for outbound calling is always available i.e. like trunking.. >From what I can tell when I place an

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

Hi all, I have the following setup: UAs ------------SER ------------------------ ASTERISK ---------------------GNUGK --------------- GWs SER is configured to route call requests from UAs to Asterisk. Asterisk is configured to receive the call on SIP channel and dial out to GNUGK over H323 channel. The problem I'm facing is that asterisk sends out the call request to GNUGK and times out

Hi all, I would like to call from SIP client to Asterisk then GnuGk, then Cisco 5300 to PSTN phone. Is this possible? I need simple config asterisk and gnugk.Can somebody help me? Ganbaa -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040629/cfe09e1e/attachment.htm

Hi, I am using asterisk 1.4. I have confgured the musiconhold.conf file. However, when i make a call and then hold the call it does nothing. in the CLI i do not see the starting/stopping musiconhold messages. i am making calls from sip to h323 using asterisk assip/h323 gateway (with gnugk and ooh323). i get the following messages when putting the call on hold: -- Executing [204 at default:1]

Can someone tell me how I can configure ooh323.conf to accept call from h323 gateway (only the authorized h323 gateway) to my asterisk. I will be glad to know how this can be done. I tried the setting as in ooh323.conf [abcd] type=user context=default ip=62.193.1XX.2XX disallow=all allow=gsm allow=ulaw this gateway can make call, even if these lines are commented out and you restart the

I receive the following error when I try to call another H323 extension from another H323 when going through *. NOTICE[27669]: File channel.c, Line 1325 (ast_set_read_format): Unable to find a path from 1 to 8 NOTICE[27669]: File channel.c, Line 1296 (ast_set_write_format): Unable to find a path from 8 to 1 WARNING[27669]: File chan_h323.c, Line 528 (oh323_write): Asked to transmit frame type 1,