similar to: Cisco 7945G phone with asterisk

Hi, I have been out of touch with asterisk for quit some time and needed some recommendations. I am looking for SIP hardphone that works well with asterisk server. Pls suggest. cheers /ag -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110212/ccd9d985/attachment.htm>

Hi, Has anyone met any success, installing localized (ie non-english) menus within SIP firmware enabled Cisco 7941 ? Those phones seem to be trying to download localized menus from Cisco Call Manager but as they are managed by an Asterisk server, I'm looking for a workaround. Any advice ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Good Afternoon, I have an Asterisk box that is acting like it is passing "core show" before every command I type. For example, if I type sip, I will get "No such command 'sip' (type 'core show help sip' for other possible commands). Any ideas? -- -jayson

I am posting here since you guys are my last hope. I am trying to configure a Polycom Soundpoint IP 335 with MWI. Is there any way to eliminate the scrolling messages and Msgs softkey? I am trying to get it where it's just the light that indicates the new messages. I don't know if Asterisk has to send a different notification or what have you. Thanks, --Eric -------------- next

I have a client that has 5 Snom 320s. 4 work great, one does not. I upgrade the firmware to the latest (6.5.2) and the problem goes away, but then comes back a couple days later. There is a slight packet loss on the phone (about 1%), though there is no packet loss on any of the other phones. I determine the packet loss by the Linux command "ping -f -c 10000 192.168.2.10". Outgoing

Hi All; Any one can suggest a TFTP server to be installed in Fedora (same machine that Asterisk is installed) to be used for Cisco IP Phones to download the required firmware and configuration files. Thanks for the help in advance. Regards Bilal

Is anyone here familiar with configuring Cisco routers? I have a Cisco 3620 with 3x WIC-1DSU-T1, 1x 2FE-2W, and 1x 1E-2W. I have 2 T1 lines being brought in by ACD.NET, a local CLEC. Within the next 3 months we will be getting another line from them, as our bandwidth needs grow. I am new to cisco and need help configuring this router. I am currently on a 1M DSL line with them. The DSL modem is

Hi all, I am handed a project to setup *. The requirement is that it can handle 8 T1s. Half of the calls coming into the system will be routed to SIP extensions (with transcoding). The machine we have in our disposal is a new dual Xeon 3.2gHz server with 2g of ram and an dual 1000mb nic. Voice will be coming in from the PSTN (through 2 quad digium cards) in g711ulaw, and most of the time will

Hello, Are there any gateways which allow me to hook a cellphone to Asterisk and use that line for routing my calls? Basically, I'm looking to play around a bit and if I can get to connect a cellphone with Asterisk then that would be great. Thanks, Hitesh PS: I have tried to search on the web, but didn't find any pointers on how to do so. -------------- next part -------------- An HTML

Gents, I've built an Asterisk system to replace our PBX at work and have Cisco 7960 phones (SIP 7.4) running with Asterisk 1.0.7. How to I get Asterisk to recognise the '#' being pressed during a call? In sip.conf I have entries likle this: [2001] type=friend context=local-phone auth=md5 username=2001 secret=xyzzy callerid=Jack Tubby <2001>

Hi gang, We are moving our 1.4 asterisk with DAHDI over to 10.0 with SIP. Everything is going nicely except that I can't get NV_FAXDETECT to compile properly into 10.0. Because of this, I will have to have my receptionist manually transfer incoming faxes. Any suggestions? Thanks in Advance Danny Nicholas -------------- next part -------------- An HTML attachment

Hi, ? We are new to IP phone firmware upgradation (Sorry if it is a re-post of previous question(s)). ? Recently we have bought a cisco 7942G IP phone. It currently has SIP 42.9-0-2SR1S firmware loaded on it. We do not see any option to configure a SIP Proxy where we can provide SIP Server (Asterisk PC/Device)? IP address (with current firmware on it) to register it with Asterisk. ? Do we need to

Hello, I have Asterisk 1.6.2.9-2, the directive "sendrpid" does not work! I placed this in my peer: (sip.conf) sendrpid=yes trustrpid=yes or sendrpid=yes trustrpid=no (and restarted Asterisk) and the line "Remote-Party-ID" does not appear in my sip debug! Please help me, Mickael. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello - I am looking at connecting 7 - 10 locations together using Asterisk and possibly some VoIP gateway appliances. I need to insure best voice quality as these trunks will be used primarily for customer calls. I am considering implementing a full T1 frame relay circuit to each location which can be done for a reasonable cost. DSL and Cable are currently at each location and setup for

Hello What is the difference between these 2 version of Asterisk in terms of functionality. For a small office am I going to run into problems if I use the easy version... Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050717/311c56ec/attachment.htm

Thanks everyone for the input. After pricing everything we need out, it's not worth trying to get our old system to work, so I've pitched ditching everything and starting over. I'm very excited and hoping they'll go for it. Regardless, I'm going to throw a box together for my house, we have no home phone (just cell phones) so this'll be a great way of testing. All

Sending works but on receive it keeps failing - reporting back 'training' failure. I am using Asterisk 1.6 with T38. What should I post to the list to assist diagnoses? Michael

Anybody here having trouble receiving email from the list on Gmail? I havn't received anything since Friday July 29.

Hi, Sorry for maybe not a very list related topic, but I have always been curious if there is information on how many Asterisk based PBXs are operating Worldwide? Thanks and hope the community will not reject my curiosity! :) Best Regards, Vallu Sevana Oy -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have compiled zaptel on Mandrake following everything I have always done on Fedora. It is 2.6 udev so... I had to modify the 01-devfs.rules Make linux26 Make Make install... Everything appears to compile correctly but it says module not found when doing "modprobe zaptel" Is this a rights issue? Jordan Novak -------------- next part -------------- An HTML attachment was